15.0

Embedding external effects devices
In order to include external effects devices you require an audio interface with several in- and outputs,
whereas one input/output pair is reserved for the external effects device.
Routing the signal:

You can loop in the signal either as an effect or insert.

Insert send: Route the channel output directly to the physical output of the card to feed your
external device.

Insert return: Select a mixer channel to act as an insert return channel. In the input section of the
channel select the sound card input connected to the output of the device you want to loop in.

External send effect: Creates an AUX bus to be fed from different channels of the corresponding
AUX send. The output of the AUX bus has to be routed to a physical output of the sound card.
Connect the output of the effects machine to the desired input of the sound card. The sound card
input is connected to the mixer channel by selecting the corresponding input section of the sound
card of the AUX return channel.
Page 288