15.0

Recording the first track

Right click the "Record" button on the transport console.
Enter all of the necessary settings for recording in the dialog which appears.
Hint
: If the transport console is hidden, show it by clicking the "Transport" button in the lower part of
Samplitude Music Studio 15.

By default, the "Monitor" button is always selected (if not, then click "Monitor" to activate it).
This function lets you preview audio material and monitor it while recording. The level will display
what enters the sound card inputs. If it reaches upper red range, the input level is too high. In this
case, you should reduce the input volume.

Click on the "Record" button. Samplitude Music Studio 15 now starts recording and indicates
this in the record window by displaying a counter with the passed record time.

Now stop the recording at a suitable position by pressing the "Stop" button.
Samplitude Music Studio 15 then stops recording. You can now either use the recording or delete it.
You can repeat the recording without saving the first attempt on your hard drive. If you want to use your
recording, Samplitude Music Studio 15 will add the audio material to the first track as an object.
You can listen to the result anytime by clicking on the "Start" button in the transport control or by
pressing the space bar.
Recording another track
Now we will record a second track. If your record is still open, please close it. Now perform the
following steps:
1.
Activate the record button in the second track by clicking on the "R" button left of the second track. The
track is now ready for recording.
2.
Right click on the record button in the transport console. You can now enter further record settings. As
we now want to play the first track while the second is being recorded, you will have to activate "Play
while recording".
Page 46