2013

Effects and effect plug-ins 101
Parametric equalizer (track effects, mixer
channels, Mixmaster)
This dialog contains a 4-band parametric equalizer. With the parametric 4-band
equalizer, filters can be activated on four freely selectable frequency bands in order to
adjust the sound of a sample. You can produce wide-band frequency adjustments for
both high and low pass ranges as well as small-band corrections of specific frequency
ranges.
Use the Play/Stop button to activate the real-time preview function. This lets you
check the acoustics of the filter setting before it is calculated into the sample by
clicking "OK".
Freq. (frequency): The center frequency of the individual filters can be set between 10
Hz and 24 kHz with the frequency controllers. Freely choosing the frequency enables
multiple filters to be set to the same frequency in order to have a greater effect.
Q (Bandwidth): Here you can set the bandwidth of the individual filters to between 10
Hz and 10 kHz.
Gain: These controllers allow you to raise or lower the filter. Setting the controller to 0
deactivates the filter and doesn't use CPU power.
Volume: Use this controller to adjust the master volume should the level rise or sink
too much while filtering.