2013

142
www.magix.com
If you prefer to adjust the "classic" level reduction and amplification manually,
you can deactivate this function.
• Adaptive release: This is "semi-automatic", i.e. you can roughly adjust the release
time, and AM-Track reduces it according to the current signal power from "a little
(1%)" to "considerably slower (100%)". In "Vintage" mode, this regulation
method is particularly intense, since it affects the feedback loop process. For
instance, if you are editing vocal tracks or dense, complex material, it can sound
"calmer" or more "musical" if adaptive release is activated.
• Capacity: Adjusting the "capacity" controller sets the time response of the
"adaptive release". The greater the capacity, the more sluggish the release
adjustment. You can therefore influence larger parts of the compensation
response. For instance, if you want to use vocals that have been "moved
forward", you should use a short release time (maybe 80-100 ms) and a greater
value for semi-automatic (e.g. 80). Vice versa, you can reduce automatic feed by
switching the relation (smaller capacity, generally greater release time).
• Comp mix: Parallel compression is a popular "studio trick", particularly with
complex material. Adding the original signal retains the transients and spectral
balance of the source. You can add compression by turning the mix controller. A
mixed signal is particularly discreet, more transparent, and less "squishy" with
vocals, whereby the compressed portion usually has a higher level reduction than
without adding the original.
Track dynamics
Samplitude Music Studio 2013 provides two different dynamics modules: one that
can be opened via the "Offline effects" menu (talked about in further detail in the
corresponding chapter), and a second one that is only available via the track effects
and in the mixer.