2013

Tools and wizards 295
Track settings
Audio
Output: Specifies the audio output device. This can either be a bus (submix bus) in
the audio studio mixer or a wave out device. This parameter can can adjusted in the
VIP window, in the mixer, as well as in the track settings.
Surround mode: Activates Surround mode.
All tracks: Sets the current settings for all other tracks in the VIP.
Track type: Displays whether the track is set to AUX send and/or a submix-bus.
Color: The track color set here is displayed in the track editor as well as in the track
box in front of the track name. If the track is a track folder, then the color will be used
for the border and all tracks in this track folder.
Audio recording options
Audio device: Defines the audio recording device. This setting can be made in the VIP
window, in the mixer, or in the track settings.
Recording file: Specifies the name for the recorded wave file. As a default, the
following mask is applied: [VIP][tracknumber].wav. If you move tracks, then the track
number in the file name will no longer match.
Track name: Change the track names here as they are shown in the track box.
Track recording options
Stereo: Records a stereo wave file.
Mono: Mono recording uses an input device for recording.
Mono (Mix): Mono recording records a signal which mixes both input devices.
Record in RAM only: This creates a RAM wave project. The difference from a HD
wave project is that it opens a VIP in the computer's RAM. This enables a significantly
better playback performance, but is only suitable for short recordings.
MIDI
Recording device: Set up the MIDI interface to be recorded.
Playback device: Set up the MIDI interface on which the track's MIDI information will
be output.
All tracks: Applies the settings to every track.