2013

File menu 333
Snap offset to project start: Here the snap offset can be set relative to the beginning
of the project. "Use current position for offset" specifies the current position as the
grid's zero position.
Use snap offset also for grid: The snap offset is used as a reference size for the grid.
Mixer setup
Here you can open the mixer setup (view page 477) dialog. Use this to set the
number of tracks, AUX buses and submix buses as well as the routing presets for the
most frequent use cases.
Playback options
The play parameters window which appears after selecting this menu option is
designed to quickly enter playback parameters.
Sample rate: The sample rate can be changed here as long as the sound card
supports the new rate (some sound cards even support changing the rate while
playing the sample). This is especially useful for hearing notes in a sample range
played in a different octave. When selecting half the sample rate, the pitch should be
the same. It would be played one octave lower.
Device: Use this dialog box to specify the sound card's driver. This is necessary if
playback takes place through a single sound card device, and is especially important if
multiple output devices are located in the computer.
Autoscroll: This you to activate the "Autoscroll" feature. This is especially useful
when working with large disk files. The HD wave project window will follow the play