2013

Edit Menu 349
Remove Range
This command removes the current range from the grid and marker bar. This function
is also available by right clicking in the grid and marker bar.
Range Not Over Tracks
This command selects the selected range from the grid and marker bar only, and not
in the tracks. Switch between the "Range not over tracks", "Range over current track",
and "Range over all tracks" functions by double clicking in the selected range in the
grid and marker bar.
Range Over Current Track
This command selects the selected range from the grid and marker bar as well as in
the selected track.
Range Over All Tracks
This command selects the selected range from the grid and marker bar as well as in
all selected tracks.
Range length
This command lets you set the range length to 1, 2, 4, 8, and 16 bars. You can set the
tempo in BPM with "View -> Snap setup".
Split range
This function is particularly useful for working with loops. If not already displaying in
split range mode, the project is switched to this mode first to display three sections
on the screen.
The upper section displays the whole sample, the section located at the bottom left
displays the data near the beginning of the range, and the section at the bottom right
displays the data near the end of the range.
The boundaries of the range can be positioned exactly in the lower sections, while the
upper section will display the location of the entire range. You can also define ranges
across several sections.
In order to revert splitting, the display setting has to be changed to a section again
using "View -> Sections -> 1", or "Shift + B".
Key: B
Deactivate: Shift+B