2013

Menu view 431
Right clicking "Record" displays the record parameters window. This lets you make
settings such as "Playback during recording", and also lets you record material directly
from the record parameter window.
Time display: This displays the current playback position of the project. Double
clicking on the window lets you numerically enter a new playback position. Clicking
the green arrow lets you set various units of measurement.
L/R time display: This displays the length of a selected range and is editable by
double clicking the display.
Marker 1-12: Clicking on one of the marker buttons saves the current playback
position to the button. If it already contains a previously saved position (marker
appears in light color), the program will place the playback position to the saved
position. A right click clears the button memory and allows you to store a new
position to the button.
Marker: This button open the marker manager for more detailed marker editing.
Punch: This button switch Samplitude Music Studio 2013 into punch record mode.
This means that the recording process can be started any time during playback. This
is also called "On-the-fly recording". This can be repeated numerous times. Punch-in
and out markers are set automatically. You can stop a punch in recording process
with another click on the record button. However, this does not stop the playback of
the project.
Punch in: This sets the punch in position.
Punch out: This sets the punch out position. If the both the punch in and punch out
markers are set, the punch recording can be started with the "Playback" button. The
program will play back the project until it reaches the punch in point.
Sync: This button opens the synchronization window.
Loop: The loop button activates loop mode, meaning that playback continues to loop
through a previously selected range.
RCMON: This button activates Samplitude Music Studio 2013's "Record monitoring"
feature. All tracks that have their REC buttons activated are monitored with the peak
meters. The inputs of the audio device(s) are directly routed to the outputs of the
sound card, if the sound card offers this functionality (check with your sound card
manufacturer). This offers the same functionality as with audio players.
Scrub >> <<: These buttons allow you to scrub through your project. During
scrubbing the playback of the project continues with varying speed while the playback
direction can be changed. This also offers a convenient way of finding audio sections
such as clicks or mistakes in the audio material.