User manual

Remove 61
www.magix.com
frequencies too much throughout the whole level, it can cause
distortions. In this case, lower the master volume using the master
volume control on the main screen.
Thumb Controls: All of the 10 frequency areas can be raised or
decreased separately by the 10 volume controls.
Link Bands: Using this switch you can match the frequency areas in
a flexible way to avoid the overemphasizing of single frequency areas
that sound artificial.
A/B: If you have selected a preset for the effect and later you change
it manually, you can compare the original-preset-sound with the new
adjustments using the A/B-switch.
Reset: Reset inserts the sound effect into the neutral starting position
where no processing power is used and where no effect is calculated
in the sound.
Touch-screen (right EQ-Section): This is the "sensor-field" of the EQ:
Use your mouse to draw a curve that will be transferred immediately
into the corresponding EQ control adjustment.
Sound Cloner
The FFT filter (Sound Cloner) in MAGIX Video Sound Cleaning Lab
has two areas of application.
It's first function is the removal of complex noise such as power
humming. Since this is a precisely defined audio disturbance, the
filter can work cleaner and more precise than the DeNoiser that has
to extract the noise from the audio signal first. You'll find the presets
in the "Presets" menu.