Operation Manual

Audio tracks 143
www.magix.com
act position again and gaps can occur.
zes the speed of the copy process; no
.
e: Defines the number of audio sectors that should
CD in a read cycle. The higher the number of
27 sectors.
mber of audio sectors that will be used for
correction. A higher number results in a better
a slower copying process.
the recording dialog
not support this mode (trying digital
error message), or they only support it with
difficulty (results in audio objects with crackling noise, skips, etc.). In
omputer, the CD titles are
simply played back from the CD-ROM drive and are re-recorded as
r,
s"
menu. To ensure easy recording of the CD titles via the "Recording"
dialog, the audio output on the CD-ROM drive must also be
ne
aker
undtrack Maker gives your movie just the right mood!
Music tracks corresponding to the specified mood are generated
6)
is split into 3 steps.
pply". If you click on "Cancel"
the dialog will be closed and all changes will be discarded.
Select music
have problems finding an ex
Burst copy mode: Optimi
software corrections made
Sectors per cycl
be read from the audio
sectors, the faster the copying process. Many SCSI systems have
problems with more than
Sync sectors: Sets the nu
software
synchronization but also in
Scanning CD tracks with
Some CD-ROM drives do
extraction results in an
this case, the CD may be "scanned" by recording it into the
computer. When recording the CD to the c
.WAV by the sound card. Before recording a CD to your compute
change the program settings in the"File -> Audio/Video option
connected with the sound card input. This connection is usually
already set up on modern multimedia PCs. If not, this is easily do
by installing a cable inside the computer case.
MAGIX Soundtrack M
The MAGIX So
automatically. Even mood changes are possible.
You can open MAGIX Soundtrack Maker via the
File (on page 18
menu. The work
Then close the dialog by clicking on "A
style
First, choose the musical style you want. The option "Apply only
between start and end marker" lets you limit the length of the