Installation & Assembly

PARTS LIST
INSTALLATION INSTRUCTIONS
1.
Remove one 1/4"-20 pan head machine screw (C) and one 1/4" hex lock nut (D) from folding nose
bracket (B)
2.
Position folding nose bracket (B) so that its hole aligns with the hole in the hand truck nose
3. Insert the 1/4"-20 pan head machine screw (C) through the bracket (B) and the nose as shown
4. Assemble the 1/4"-20 hex lock nut (D) and tighten to secure in position
If hole does not exist in the hand truck nose:
1. Center F1 nose bracket (B) and use as a guide to drill a hole through the hand truck nose with a
9/32" drill for a 1/4" pan head machine screw (C)
2. Proceed with the above assembly instructions
TOOLS REQUIRED
PHILLIPS HEAD SCREW-
DRIVER
7/16" BOX END WRENCH
9/32" DRILL
F1 FOLDING NOSE ASSEMBLY INSTRUCTIONS
B5775 Revised 02/13 © Copyright 2010-2013, Magline, Inc.
ITEM DESCRIPTION QTY. PART NO.
F1 folding nose assembly (includes parts below) 1 301019
A F1 folding nose plate 1 301020
B Folding nose bracket 1 301022
C Pan head machine screw 1/4"-20 x 1-1/4" 1 80104
D Hex lock nut 1/4"-20 1 80675
A
B
C
D
www.magliner.com
Magline, Inc., 1205 West Cedar Street, Standish, MI 48658 • (800) 624-5463 • (989) 512-1000

Summary of content (1 pages)