Owner's manual

ManualsBrandsMagliner ManualsSpecial machineryFOUR-WHEEL SNACK TRUCK

www.magliner.com

ASSEMBLY INSTRUCTIONS

INSTRUCCIONES DE MONTAJE

Table of Contents:

Parts List ............................. 2

Assembly Instructions ........ 2-5

Warranty Information ............. 6

4 Wheel

Snack Truck

Índice de contenidos:

Lista de piezas ....................... 2

Instrucciones de montaje ..... 2-5

Información sobre la garantía ... 6

Carretilla

de 4 Ruedas

para el

transporte de

Tentempiés

Summary of content (6 pages)

PAGE 1
Assembly Instructions InstruccIones DE Montaje 4 Wheel Snack Truck Table of Contents: Parts List .............................. 2 Assembly Instructions ......... 2-5 Warranty Information ............. 6 Carretilla de 4 Ruedas para el transporte de Tentempiés Índice de contenidos: Lista de piezas........................ 2 Instrucciones de montaje...... 2-5 Información sobre la garantía.... 6 www.magliner.
PAGE 2
TOOLS REQUIRED • (1) 1/4” combination wrench or socket • (1) 5/16” combination wrench or socket • (1) #3 Phillips Screwdriver • (1) pliers • (1) Hammer • (1) Rubber Mallet HERRAMIENTAS NECESARIAS • (1) LLAVE DE TUERCAS O DE TUBO COMBINADA 1/4” • (1) LLAVE DE TUERCAS O DE TUBO COMBINADA 5/16” • (1) DESTORNILLA DOR PHILLIPS No 3 • (1) ALICATES • (1) MARTILLO • (1) Mazo de Hule Parts List ITEM DESCRIPTION 1 Frame (with cord installed) 2 Handle 3 Nose 4 Wheels 5 Casters 6 Folding Nose Completion Pack co
PAGE 3
The following assembly sequence is recommended: Step 1: ASSEMBLe the nose, wheel brackets, Folding Nose and axle to the frame. (Refer to Figure 2) Use a workbench or table of convenient height and place all components in view and within reach. a. Position the side channel reinforcements on the inside of the long legs of the frame making certain holes are aligned. (The reinforcements are the same length as the frame legs.) Refer to Figure 2 (page 4).
PAGE 4
5 5 11 Figure 3 (for 10” wheels) 4 1 Ilustración 3 7 14 13 18 17 17 Figure 2 (for 8” wheels) 9 4 16 13 4 8 Ilustración 2 13 19 14 15 6 7 14 19 16 10 Hex Lock Nut Contratuerca Hexagonal 16 3 Figure 4 For Extruded Noses please follow instructions provided in nose kit. Ilustración 4 Para frontales extruidos, siga las instrucciones indicadas para el kit del frontal. “Recessed” Heel Position *Only for noses with cutouts.
PAGE 5
Figure 5 Ilustración 5 12 11 2 5 11 5 1 18 17 Step 3: 17 Assembling the handle and casters (Refer to Figure 5) 9 a. Position the handle into the frame channels. With a rubber mallet, tap the top of the handle down to ensure that the c channel is fully installed around the top cross bar and the holes of the handle are aligned with the holes in the frame channels. b. Align the casters on the outside of the frame with the handle mounting holes. Insert the 1/4"-20 screws into the holes.
PAGE 6
WARRANTY Information Información sobre La GarantÍa Magline One-Year Limited Warranty Garantía limitada de un año Magline Magliner products have a one (1) year warranty from the date of purchase against defects in workmanship or material. Los productos Magline tienen una garantía de un (1) año desde la fecha de compra para trabajos de reparación o material.