User Manual

Control Fuse Check - Detailed I
nstructions
6-Amp
Control fu
se
holder
We suggest you unplug the 14-pin
and 4-pin connectors from the
controller to make it easier to access
the fuse holder.
Gently pull the fuse holder apart as
shown. Note that end with the
black wire tie is designed to say in
place tied to the cable.
6-Amp
Control fu
se
6-Amp
Control fu
se
(good)
Gently pull the fuse itself out of the holder
and examine it. The fuse shown here is a
new, working fuse. The small zig zag wire
is complete all the way across the fuse. If
the wire is broken, or there are signs of
overheating, the fuse is most likely blown.
Important Note:
If the fuse is blown, there is a problem with
your charger, and you should call Magline before
attempting to replace the fuse. Installing a new
fuse before fixing the problem will just blow
another fuse or do additional damage to your
electronics.
Fuse Specification:
1 ¼” L by ¼” Diameter, 6-amp
Magline, Inc. • 1205 West Cedar Street • Standish, MI 48658
Phone: [phone] • Fax [phone] • Toll Free (800) MAGLINE (624-5463)
www.magliner.com