User Manual

ManualsBrandsMagliner ManualsSpecial machineryTRAYLESS BOTTLED WATER HAND TRUCKS

Assembly Instructions

www.magliner.com

Magline, Inc., 1205 West Cedar Street, Standish, MI 48658 • (800) 624-5463 • (989) 512-1000

Table of Contents:

Nose, Wheel Brackets, Axle

Assembly ....................................2-3

Handle, Rear Brace, Support Loop

Brace Assembly ............................. 4

Wheel Assembly ........................... 5

Trayless Four Bottle

Water Hand Truck

*NOTE: Load and unload in the horizontal position only - Do

not stand the truck in the upright position when loaded with

water bottles.

Summary of content (5 pages)

PAGE 1
Assembly Instructions Trayless Four Bottle Water Hand Truck Table of Contents: Nose, Wheel Brackets, Axle Assembly ..................................... 2-3 Handle, Rear Brace, Support Loop Brace Assembly .............................. 4 Wheel Assembly ........................... 5 *NOTE: Load and unload in the horizontal position only - Do not stand the truck in the upright position when loaded with water bottles. www.magliner.com Magline, Inc.
PAGE 2
ASSEMBLE THE NOSE, WHEEL BRACKETS AND AXLE TO THE FRAME - 8" WHEELS ONLY Item A B C D E F G H I J Description Nose plate assembly Frame Roll pin for axle Axle - 18" long (815 wheels use 22100 axle) Shaft collar - 5/8" ID Rear support brace RH wheel bracket LH wheel bracket Hex head cap screw - 5/16"-18 x 1-1/4" long Hex lock nut - 5/16"-18 Qty. 1 1 2 1 2 1 1 1 4 4 Part No.
PAGE 3
ASSEMBLE THE NOSE, WHEEL BRACKETS AND AXLE TO THE FRAME - 10" WHEELS ONLY Item A B C D E F G H I J K Description Nose plate assembly Frame Roll pin for axle Axle - 18" long Shaft collar - 5/8" ID Rear support brace RH wheel bracket LH wheel bracket Hex head cap screw - 5/16"-18 x 1-1/4" long Hex lock nut - 5/16"-18 Rear support mount for 10" wheel option - 12.6" long Qty. 1 1 4 1 2 1 1 1 4 4 1 Part No.
PAGE 4
ASSEMBLING THE HANDLE, REAR BRACE AND SUPPORT LOOP BRACE (ALL MODELS) Item L M N O P F Description Handle with black grip Pan head machine screw - 1/4"-20 x 3/4" long Pan head machine screw - 1/4"-20 x 1-1/4" long Hex lock nut - 1/4"-20 Support loop brace Rear support brace Qty. 1 6 2 8 1 1 Part No. 301469 80256 80104 80675 301473 301475 1. Insert handle with black grip (L) inside the rear support brace (F) with the hand grip facing away from the nose (see Figure 5).
PAGE 5
ASSEMBLING THE WHEELS (ALL MODELS) Item Q R S T Description Flat washer - 5/8" (thick) Wheel Washer - 5/8" x 1/32" (thin) Cotter pin for axle - 1/8" x 1" long Qty. 4 2 2 2 Part No. 80705 Varies 80707 81077 1. 2. 3. 4. Slide two thick 5/8” washers (Q) on the axle. Slide one wheel (R) onto the axle, making sure the long hub portion is toward the wheel bracket. Slide one thin 5/8” washer (S) on the axle (see Figure 6).