PCIe Expansion System User's Manual

MAGMA
36
Chapter 6 Chassis Maintenance
Like all computer systems, you will need to perform some routine
maintenance tasks. Some of these include making sure that the air
vents in the chassis are clear of obstructions and that the cooling air
from the fans flows freely. You will also need to check the foam filter
behind the front panel to ensure it is clean, thus allowing for unrestricted
air flow to the fans. You should always keep an eye on all cables to
make sure they are not damaged and are securely connected.
Occasionally, you should remove the chassis cover and check for loose
cards, and remove any dust build-up.
Always remember to power down your computer and the expansion
system BEFORE you attempt to perform any maintenance tasks.
General Chassis Cleaning
The environment where your Magma chassis is operating should be the
determining factor as to how often you should perform a general
cleanup of the chassis. To perform a routine general cleaning of your
chassis, you will need the following:
1. Can of compressed air (proper distance, 6 inches)
2. Cotton Swabs
3. Isopropyl (alcohol)
4. Anti static wipes
5. Warm water (for filter)
6. Dish soap (for filter)
Do not use a vacuum because vacuums create ESD.
First, remove the four cover screws with and the top chassis cover:
Cover Screws