TM Owner’s Manual In Vehicle Entertainment System with Drop Down 6.4” and 10.
Important Safety Instructions This symbol indicates the presence of high voltage in the unit. It is dangerous to make any kind of contact with any inside part of this product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE USER’S AUTHORITY TO OPERATE IT.
Table of Contents Important Safety Instructions............................................................................................................................. 2 Important Safeguards......................................................................................................................................... 2 Damage Requiring Service .................................................................................................................................
Remote Control Battery Install / Replace 1. Slide battery compartment cover out from back of remote control. 2. Insert two AA batteries as diagrammed. (Supplied) 3. Slide battery compartment cover back in. VCR Controls Cassette Compartment For cassette insertion/removal MOBILE VIDEO SYSTEM Hi-Fi HEAD Hi-Fi Stereo VCR POWER Turns VCR on and off POWER EJECT EJECT REC Ejects cassette Starts recording REC POWER REC DEW HEAT SLP LED Indicators R STOP REW PLAY FF STOP REW PLAY F.F.
Programming and Setup To prevent excessive drain on your vehicles battery, the MovievisionTM system will shut down 20 minutes after you turn the ignition key to the “OFF” position. WARNING! You must eject the tape before leaving the vehicle for extended periods of time. DO NOT leave a tape in the VCR! Damage to the tape and the VCR will occur. This damage is not covered by any warranty. VCR Tape Playback 1. Turn “ON” the ignition switch and power will be applied to the MovievisionTM system. 2.
Using VCR Special Features (Applies to Stereo VCR Only) Audio Output The Audio Output function allows you to select four different types of audio output. Press the “MENU” button on the remote control to access the “on screen menu.” Use the “SHIFT” button to select the Audio Output function. Press the “ENTER” button to select the audio output desired, Left, Right, Mono or Stereo. Press the “MENU” button to exit.
6.4" Viewing Screen Controls and Functions 4. Adjusting the Screen’s Contrast: (CONTR) Rotate the contrast control to the left or the right to change the intensity of the dark colors compared to the light colors and vise versa. Rotating the control to the left (-) will make the screen darker (dark colors will dominate). Rotating the screen to the right (+) will make the screen lighter (lighter colors will dominate). Adjust the contrast of the screen to your viewing preference. 1.
6.4" Viewing Screen Controls and Functions 6. Stereo/Mono Switch: If a condition of interference arises and it can not be remedied by selecting another frequency, changing the transmit mode from “Stereo” to “Mono” usually will eliminate interference noise. The audio performance will be reduced when the switch is placed in the “MO” position. Return the “ST/MO” switch to the “ST” position to re-gain the high performance stereo sound in the headphones or the Vehicles stereo system. Stereo/Mono Switch 7.
10.4" Viewing Screen Controls and Functions 4. Select Button (SEL): Once the on-screen menu has been activated, press the SEL button to choose the item you want to adjust. MENU SEL. ☛ 5. Up/Down Buttons: Once an item has been selected for adjustment, press the up or down arrows to adjust that item. An adjustment bar will appear on the screen. MENU 1. Infrared Eye Point the remote control in the direction of the Infrared Eye when accessing the functions provided by the remote control. 2.
.4" Viewing Screen Controls and Functions 7. Transmitter Frequency Selection: The MovievisionTM viewing screen transmits a signal that is received by the MovievisionTM headphones and can also be received by the vehicle’s car radio. There are 3 frequencies available for use but only one can be used at a time.
10.4" Viewing Screen Controls and Functions Brightness Adjustment: Adjusts the amount of white light in the image on the screen. Step 1 MENU Step 2 MENU SEL. ☛ Press the Menu Button Once Screen Display SEL. ☛ Press the Select Button Once Step 3 U ☛ ☛ SEL. Step 4 MENU BRT Press the Up and Down Buttons to Adjust the Brightness Screen Display Screen Display SEL. ☛ Press the Menu Button Twice to Exit.
10.4" Viewing Screen Controls and Functions Saturation Adjustment Adjusts the intensity of the colors on the screen from black and white conditions to full color condition.. Step 1 MENU Step 2 MENU SEL. ☛ Press the Menu Button Once Screen Display SEL. ☛ Press the Select Button Until Saturation is Selected Step 3 U ☛ ☛ Step 4 SAT SEL. Press the Up and Down Buttons to Adjust the Saturation Screen Display Screen Display MENU SEL. ☛ Press the Menu Button Twice to Exit.
10.4" Viewing Screen Controls and Functions Reset When used will reset all the screen settings back to manufacturer default settings. Step 1 MENU Step 2 MENU SEL. ☛ Press the Menu Button Once Screen Display SEL. ☛ Press the Select Button Until Reset is Selected Step 3 U ☛ ☛ Step 4 SEL. MENU Press Either the Up or Down Buttons to Reset Screen Display Screen Display SEL. ☛ Press the Menu Button Twice to Exit.
6.4" and 10.4" Domelight Operation Domelight Operation: (Applies to MovieVision flip-down screen with dome lights built-in only.) The dome lights located in the MovieVision screen housing will illuminate whenever the vehicle doors are open just as the original domelight did. To activate the dome lights while the vehicle is in motion, press the domelight switch next to the desired domelight.
Headphone Operation Your MovievisionTM entertainment system is supplied with two (2) MovievisionTM headphones. The correct operation, care and maintenance of the headphones is critical to their ability to provide the user with a lifetime of operation. Misuse, abuse and neglect of the headphones will result in poor performance and premature failure. Please read through the simple operation and maintenance instructions enclosed. WARNING! • Do not throw the headphones.
Standard Headphone Operation 1 PWR OFF RAD MOV 3. Turn OFF the Headphones when Finished The batteries supplied with your MovievisionTM headphones will last for approximately 10 hours of continuous use. Forgetting to turn “OFF” the headphones, when not in use, will decrease the battery life. 1. Headphone Radio Operation Your MovievisionTM headphones can be used as an FM radio receiver. Repeat the following procedures to listen to FM radio broadcasts. A.
Digital Headphone Operation 1. Turn On the Headphones: To turn on the headphones, press the ”PWR” button on the right side ear pad. The digital display will show radio station digits when the headphone is on. 2. Tuning an FM Radio Station: A. Press the ”UP” or ”DOWN” button to manually tune in an FM radio station. B. Press and hold the ”UP” or ”DOWN” button for one second then release. The radio tuner will search up or down the radio band for the next strongest FM radio station.
Cleaning and Maintenance Servicing: Should your MovievisionTM VCR become inoperative, do not try to correct the problem by yourself. There are no user serviceable parts inside. Remove the unit from the vehicle and take it to an authorized MovievisionTM service facility. Cabinet Cleaning: The front panel of the MovievisionTM VCR can be cleaned with a soft cloth that has been immersed in luke warm water and wrung dry. Never use alcohol or solvents of any kind to clean your MovievisionTM VCR.
Replacement Parts for MovieVisionTM Systems ORDER BY MAIL POWER REC MODEL # PRICE Standard Headphones HP-100 $79.95 EA. Digital Headphones HP-200 $99.95 EA. MV-RM102 39.95 EA.
Replacement Parts Order Form Send Orders To: Magnadyne Corporation ATTN: Consumer Parts Sales P.O. Box 5365 Carson, CA 90749-5365 We Accept Checks, Money Orders, Visa and Master Card Make Checks Payable to: Magnadyne Corporation SHIP TO: (No P.O.
