Owner’s Manual Model: X9 For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.
Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product and years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system. Contents Remote Control Transmitters / Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Transmitters The LCD screen on the 2-way remote control displays graphic icons. It provides visual information on any trigger of the sensors and around the clock surveillance of your vehicle, as well as displaying the present status of the system.
Transmitter Operation Transmitter Button System Function Remark Lock Doors & Arms System - Arm and Delete the 2-Stage Shock Sensor Press Twice within 3 Seconds - Arm System and Hidden Alarm Function Press within 3 Seconds Car Locator Upon Armed Panic Function Press and Hold for 3 seconds.
LCD Remote Programming Vibration/Melody Mode This mode is useful when you are in a noisy place and it is difficult to hear the beep from the transmitter. While in the Vibration/Melody Mode, the transmitter will vibrate if your security system has been activated. 1. Press and hold the and buttons at the same time until one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to toggle between “ON” or “OFF”.
LCD Remote Programming Press Buttons at the Same Time: Then Press Button Within: System Function Switching to 2nd Vehicle or Returning to 1st Vehicle Operation + 5 Sec. + 5 Sec. Melody / Vibration Mode + 5 Sec. Power Save Mode LCD Screen Lamp Turns On for Five Seconds + 3 Sec. System Status Check + 3 Sec. Clear the Flash Icon and Melody Sound Battery Replacement (Applies to LCD Transmitter Only) The LCD remote control is powered by a 1.5 Volt AAA Alkaline battery.
Parking Light Indicators Flash 1 Flash Function System is Armed 2 Flashes System is Disarmed 3 Flashes Disarmed / Triggered 3 or 6 Flashes Car Locator Constant On or Flashing Under Remote Start Chirp Indicators Chirp 1 Chirp Function System is Armed 2 Chirps System is Disarmed 3 Chirps Ajar Warning 4 Chirps Disarm / Triggered 2,3,6 Chirps Progressive Car Locator System Characteristics Siren/Horn Parking Light LED Doors Starter 1 or 3 Chirps 1 Flash Slow Flash Locking Disabled (O
Manual Lock/Arm 1. Press the button on the transmitter. 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. System Armed Door Ajar Trunk/Hood Ajar Ajar Warning: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. Silent Arming/Disarming Press the transmitter and button at the same time to arm or disarm your security system.
Automatic Arming (Continued) Automatic Arming Bypass While the system is in Disarmed Mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. To exit this mode press the or buttons and the system will return to normal status. Manual Un-Lock / Disarm 1. Press the button on the transmitter. 2.
RF Valet Mode (Applies to All Transmitter Types) RF valet mode provides the same functions as manual valet mode but allows you to enter and exit the valet mode using the remote transmitter. When the system is in Valet Mode, all alarm functions and remote start functions are off. However, the remote panic feature and remote door locks remain operational. To enter/exit the RF Valet Mode, repeat the following procedures. Enter Valet Mode 1.
Panic Feature The transmitter can be used as a remote panic switch to manually trigger the alarm system in case of an emergency. 1. Press and hold the button for 3 seconds to enter the Panic Mode (horn/siren will start to sound and parking lights will flash). 2. While in Panic Mode the transmitter and buttons can be used to lock and unlock the door (if that option is installed).
Anti-Carjacking Feature Warning: This security system has a car jacking feature. Its default setting is “OFF”. So be sure to enable this feature if you feel it is needed. Active Anti-Car Jacking 1. Press and hold the transmitter and buttons at the same time for 2 seconds while the vehicle’s ignition is “ON”. The parking lights will turn on for 1.5 seconds to indicate the system has entered the Anti-Car Jacking Mode. 2.
Out of Range Indication If the Out-of-Range Indication feature is activated the system will automatically check the range every 30 minutes after armed. 1. If the user is within the range, the icon will display on the LCD screen. 2. If user is out of range, the icon will disappear from the LCD screen and the transmitter will beeps 5 times. Note: Activating this feature will decrease the life expectancy of battery.
REMOTE START OPERATIONS Activate Remote Start Your Vehicle Using the Remote Transmitter Remote Start 1. Press the button twice on the transmitter. 2. The parking lights will turn on indicating the remote start has received the signal (A melody sound from your LCD transmitter and the icon will flash on the LCD screen to confirm the remote start was activated.) 3. The engine will start in approximately 5 seconds. 4.
Timer Starting Mode Important! Timer Start should be used only in open areas. Never start or leave a vehicle running in an enclosed area such as a garage or carport. This unit can be programmed to auto-start and run the engine every 2 or 3 hours (3 hours is the default setting). The engine will run for the programmed run time and then shut down. This feature is designed to prevent the engine from freezing in cold climates. A Maximum of Six Auto-Start Cycles can Occur. Timer Starting Enter Timer Start: 1.
Turbo Timer Mode After arriving at your destination, Turbo Timer keeps the engine running for a programmable time period of 1, 3 or 5 minutes. This allows the engine’s turbo charger time to conveniently cool down after you have left the vehicle. To Activate: 1. While the engine is running, set the emergency brake and place the transmission into "Park". 2. Before turning off the engine, press and release and buttons at the same time.
Second Security System Operation If your transmitters have been programmed to a second Marksman security system, follow the steps below. For 1-Way Remote Control Transmitter: 1. First press the button on the transmitter. 2. Once the button is pressed, the LED on the transmitter will illuminate for 3 seconds to indicate second vehicle transmitter operation. 3.
Replacement Transmitters TRANSMITTERS DESCRIPTION MODEL # $ PRICE 2-Way LCD Remote for the X9 Security System X4RF-LCD 139.95 ea. 1-Way Remote for the X9 Security System X7RF 4 4 SAVE Replacement Batteries REPLACEMENT BATTERIES 1.5 Volt AAA Alkaline Battery commonly found in grocery stores, hardware stores, etc. CR2032 - 3 Volt Lithium Battery (1 pc.) Models: Radio Shack: #23-162 Duracell: #DL2032 Eveready: #ECR2032 Panasonic: # CR2032 18 59.95 ea.
Replacement Parts Order Form Credit Card or Money Order Only (Sorry No Cash, C.O.D. or personal checks accepted) Call: (310) 884-7777 Fax: (310) 637-9542 Mail to: Magnadyne Corporation ATTN: Consumer Parts Sales P.O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY STATE ZIP CODE DAY TIME PHONE NUMBER CREDIT CARD INFORMATION CREDIT CARD N0.
Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.
