Owners manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 5. Once a final position has been chosen for
the new exhaust system, evenly tighten all clamps
from front to rear using the torque specifications on
page one of the instructions. Replace the shield and
cross brace. Inspect all fasteners after 25-50 miles
of operation and re-tighten if necessary.
Step 4. Finish by installing both the Muffler
Assembly and both Tip Assemblies using the
supplied 250" clamps, fitting the hangers into the
rubber insulators.
15297 9/24/14 REV 000