Dual Alarm CD Stereo Clock Radio INSTRUCTION MANUAL
PRECAUTIONS CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.
4 5 6 7 3 8 10 2 12 9 11 23 13 1 14 19 17 16 18 15 21 20 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 22 FUNCTION Switch (CD/RADIO/BUZZER ) VOLUME Control POWER Button LCD Display CD Door/REPEAT ALARM CD Door Open Lid ALARM 1 Button ALARM 2 Button TUNING Control PLAY/PAUSE Button SKIP FORWARD Button E3 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
POWER SUPPLY DISPLAY This unit works with AC 120V, 60 Hz. In CD or RADIO mode, press the DISPLAY button, the display will shown the number of current track and the current station. 1. Connect AC power cable to wall outlet with 120V supply. 2. Insert two AAA 1.5V batteries into battery compartment for time back up in case of power failure. RANDOM/REPEAT The CD player can play “RANDOM”, “REP.”, “REP. ALL” and “RANDOM REP. ALL” by press RANDOM/REPEAT button repeatedly. RADIO OPERATION 1.
SETTING THE CLOCK TIME 1. The CLOCK uses the 12 HR format. 2. Press and hold the CLOCK button. The hour digit will begin to flash. Press the SKIP or button in order to adjust the hour. 3. Press the CLOCK button again, the minute digit will begin to flash. Press the SKIP or button in order to adjust the minutes. Press the CLOCK button once more in order to confirm the clock setting. 4. SETTING THE ALARM TIME 1. 2. 3. 4. This appliance can be set to two ALARM times for CD or RADIO or BUZZER.
Radio-réveil stéréo à deux alarmes avec lecteur CD GUIDE D’UTILISATION
IMPORTANTES CONSIGNES DE SÉCURITÉ AVERTISSEMENT : • • AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION, N'EXPOSEZ PAS CET APPAREIL A LA PLUIE NI A L'HUMIDITÉ. CET APPAREIL NE DOIT PAS ÊTRE EXPOSÉ A L’EGOUTTEMENT OU AUX ÉCLABOUSSURES DE LIQUIDE QUELCONQUE ET AUCUN OBJET REMPLI DE LIQUIDE, TEL UN VERRE D’EAU, NE DOIT ÊTRE PLACÉ DESSUS.
4 5 6 7 3 8 10 2 12 22 9 11 23 13 1 14 19 17 16 18 15 21 20 1. Sélecteur de fonction - lecteur CD/radio/tonalité d’alarme (CD/RADIO/BUZZER) 2. Commande de volume 3. Interrupteur d’alimentation (POWER) 4. Affichage à DCL 5. Couvercle du plateau à disque/répétition d’alarme 6. Poussoir d’ouverture du couvercle du plateau à disque 7. Touche de réglage de l’alarme 1 (ALARM 1) 8. Touche de réglage de l’alarme 2 (ALARM 2) 9. Commande de syntonisation 10.
SOURCE D’ALIMENTATION AFFICHAGE Cet appareil fonctionne à partir du courant alternatif (CA) de 120 volts, 60 hertz. Appuyez sur la touche d’affichage (DISPLAY) lorsque l’appareil se trouve en mode radio ou en mode lecteur CD, pour faire apparaître à l’affichage le numéro de la piste en lecture ou la fréquence de la station radio syntonisée. 1. 2. Branchez le cordon d’alimentation CA sur une prise de courant domestique de 120 volts.
GARANTIE MAGNASONICmd Appareils électroniques grand public, électroménagers et équipement pour le bureau à la maison RÉGLAGE DE L’HORLOGE 1. 2. 3. 4. L’affichage de l’horloge se présente en un format de 12 heures. Appuyez sur la touche de réglage de l’horloge (CLOCK) et maintenez-la enfoncée. Les chiffres correspondant aux heures se mettront à clignoter à l’affichage. Utilisez les touches de déplacement rapide/saut (SKIP ) pour effectuer le réglage des heures.