DVD Player User's Manual

Page 6
1. TURN ON THE TV AND YOUR DVD PLAYER
x Press the POWER button on the player to turn
on the power to the player. The display on the
player lights up and the player will start
searching for a disc
NOTE: You can not turn the power on using the
remote if the power is off. You can only turn the
player on and off using the remote when the
player is in Standby mode. In Standby mode the
display of the player turns off and it goes into
power saving mode. Access the Standby mode
by pressing POWER button on the player and
then Only using the STANDBY/ON button on
the remote.
x If there is no disc in the player, “NO DISC” will appear on the
screen
2. INSERTING A DISC
x Press the OPEN/CLOSE button on the DVD
player or the remote , and “OPEN” appears on
the TV screen.
x Place a disc on the disc tray, label facing up and
press OPEN/CLOSE button. “CLOSE” appears
on the TV screen and the disc tray closes. Now
the player will proceed to read the disc
automatically.
3. PLAYING A DISC
x The contents of each disc menu (Root menu) varies according to who and how the disc was
created and what features were included. The disc menu will automatically appear once the
player has read the disc and all the warning screens have passed.
A) DISC MENU
a. Press MENU button once.
x The TV displays the DVD Root menu when a DVD disc is loaded. When a SVCD or
VCD2.0 disc is loaded, the VCD menu will be displayed on screen (when PBC is off).
Press the PBC button once to display current PBC state.
x PBC is only initialized when a SVCD of VCD2.0 disc is loaded.
INTRODUCTION TO BASIC OPERATION