User Manual

Preparing the Film Scanner

1. Press and hold the Power button on the scanner to turn it on.

2. Insert the prepared lm or slide adapter into the slot on the

right side of the lm scanner.

3. In the Main Menu use the arrow keys to highlight the

FILM TYPE option and press the OK button to select it.

4. Use the > arrow key to cycle through Negatives, Slides, or

B&W. Press the OK button to select it.

5. The next screen will show the dierent sizes of your selection.

Use the > arrow key to select the correct size and press the

OK button.

IMPORTANT: The quality of the original slide/lm will impact the

quality of the scanned image.

Cleaning and Care

Use the included cleaning brush to ensure there is no dust or debris

on the lens. Insert the soft end of the brush, face down, into the

lm/slide holder slot. Carefully push the brush around inside to get

rid of any dust or debris that may be on the lens.