User Manual

Operating Instructions

1. Connect the USB cable to the USB port on the lm scanner.

2. Connect the other end of the USB cable into the included USB

wall adapter. Plug the wall adapter into a power outlet.

3. Press and hold the Power button on the scanner to turn it on.

NOTE: The FS52 will automatically shut o after 10 minutes of inactivity.

Powering on Your Film Scanner

1. On the Main Menu, go to LANGUAGE and press OK.

2. You may now select the language of your choice by using the

< and > buttons to scroll between the available selections.

• English • Deutsch

• Espanol • Japanese

• Francais • Chinese

3. Press the OK button to select the language.

Changing the Language

Prepping Your Film/Slides

1. Open the appropriate slide/lm adapter and insert your

slide/lm. Each adapter is labelled to identify it. If you are not

certain of your slide/lm type refer to the images below.

2. Ensure the slide/lm is facing the correct way and is not bent.

3. Close the slide or lm adapter and press the edges so that it

locks into place.

IMPORTANT: Ensure your slides/lm are clean and free of dirt

or debris