User Manual

• SET: Selects the cleaning cycle time. When unit is turned on, the default

time is set to 180 seconds.

• Choose the cleaning cycle time according to the severity of cleaning

needed (180s, 280s, 380s, 480s, 90s).

• ON button: Starts the cleaning cycle. The red light indicates that the

cleaning cycle has started. Time remaining is displayed on the digital

screen.

• OFF button: Stops/pauses cleaning.

• ON button: Resumes cleaning.

• When display shows 000, the unit stops automatically and the red light

will turn o.

• Repeat above steps for additional cleaning.

• Lift the lid and remove item(s). Use a soft, non-abrasive cloth to dry

item(s) and remove any loose dirt.

• Unplug the unit when the cleaning cycle is complete.

• Pour the water out and wipe down with a dry cloth.

• Unplug and empty the unit after using.

• Do not keep water in tank after use.

• Wipe the tank and unit with a dry cloth.

• To reduce risk of electrocution, do not clean entire unit with water.

• Store in cool, dry place that is not accessible by children.

ATTENTION: This appliance has a polarized plug (one blade is wider than the other). As a

safety feature, this plug will t in a polarized outlet only one way. If the plug

does not t fully in the outlet, reverse the plug. If it still does not t, contact a

qualied electrician. Do not attempt to defeat this safety feature.

UNIT MAINTENANCE

OPERATION

- 7 -