17C13A2E AutoScan Color Monitor English Français Appendix English Deutsch Français Operating Instructions ................. 2 - 19 Mode d'emploi …………… 20 - 37 Declaration FCC ........ A1 Information for Users in the U.S. ...... A3 Warranty/address A5 ... A6 Hinweis/GS/ACHTUNG ........ A4 Declaration FCC ........ A2 For Customer Use: Enter below the Serial No. which is located on the back of the cabinet. Retain this information for future reference. Model No. 17C13A2E Serial No.
E N Introduction The colour monitor displays sharp images of text and graphics with a maximum resolution up to 1280x1024 pixels. It is optimal for Windows, CAD / CAM / CAE, desktop publishing, spread sheets, multi-media, and any other application which demands large screen size and high resolutions. This monitor automatically scans horizontal frequencies from 30KHz to 69KHz, and vertical frequencies from 50Hz to 120Hz.
E N Note: If you experienced your monitor display is changing from color to mono, it's possible that you are using a non-VESA-DDC-standard video card. Please consult with your local PHILIPS dealer for more information. As an Energy Star Partner, MAGNAVOX, has determined that this product meets the Energy Star guidelines for energy efficiency. IBM, IBM PC and Power PC are registered trademarks of International Business Machines Corporation.
E N Safety precautions and maintenance ◆ Disconnect the monitor from the mains supply if the monitor is not to be used for an extended period of time. ◆ Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. ◆ Do not place objects on top of the monitor cabinet, which could fall into vents or which could cover them and prevent proper cooling of the monitor’s electronic devices.
Installation Important: Please refer to the user’s manuals of your computer and video adapter to make sure these equipments are properly installed and configured before installing the monitor. Positioning / Ventilation ◆ Avoid exposing the monitor to direct sunlight, stoves or any other heat sources. ◆ To prevent overheating, make sure that the ventilation openings of the monitor are not covered. ◆ Keep moisture and dust away.
E N Connection Important: Please make sure the AC power to your computer is “OFF” before connecting or disconnecting any display peripheral. Failure to do so may cause serious personal injury as well as permanent damage to your computer equipments. • Connect the monitor to the computer using the supplied interface cables. Connection with computer system other than IBM PC or Apple computers may need different type of adapters. Please consult your computer supplier for these adapters.
E N Control locations and functions Monitor control panel ➄ ➃ ➂ ➁ ➀ Descriptions of knobs and keypads on front control panel ➀ • Press this knob to switch ON and OFF of monitor’s power. ➁ • OSD rotary control knob. ➂ • Active OSD menu. √ • Adjust contrast of the display. ➄ • Adjust brightness of the display.
E N OSD menu tree structure First Level BRIGHTNESS & CONTRAST Second Level Third Level BRIGHTNESS CONTRAST SAVE CANCEL SIZE & POSITION HORIZONTAL SIZE HORIZONTAL POSITION VERTICAL SIZE VERTICAL POSITION SAVE CANCEL GEOMETRY PINCUSHION TRAPEZOID TILT SAVE CANCEL COLOR TEMPERATURE 9300K 6500K USER COLOR #1 USER COLOR #2 RED GREEN BLUE SAVE SAVE CANCEL CANCEL SPECIAL DEGAUSSING MOIRE CANCELLATION SAVE V H SAVE CANCEL CANCEL RECALL FACTORY PRESETS RECALL BRIGHTNESS & CONTRAST RECALL SIZE & P
On-Screen-Display Activating the On-Screen-Display to enable OSD The monitor controls are accessed by pressing button (On-Screen-Display). The main menu will be displayed as follows. 1280 x 768 68.7k 85Hz 1 2 3 4 5 6 Each Sub-Menu (1-6) is selected by highlighting it via the rotary control and pressing button to confirm. To exit OSD, highlight at the bottom of the main menu and press select button . to select or While operating Sub-Menu, please use rotary control adjust and press button to confirm.
E N ● Contrast : Adjusts contrast between foreground and background. 1 1 63% ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu.
● 2 2 63% ● E N Vertical Size : Adjusts image height A A Vertical Position : Moves image up or down 2 2 63% A A ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu. Sub Menu-3: GEOMETRY ● Pincushion : Adjusts the amount of curvature on the vertical edges. 3 3 63% ● A A Trapezoid : Equalizes the length of the top and bottom edges.
E N ● Tilt : Tilts the image clockwise or counter-clockwise. 3 3 A 63% A ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu. Sub Menu-4: COLOR TEMPERATURE ● 9300°K : Factory preset color temperature of 9300°K. 4 9300ºK ● 6500ºK 4 1 2 9300ºK 6500ºK 1 2 6500°K : Factory preset color temperature of 6500°K.
● 1 User 1 : User set 1 for color temperature then select R, G or B for adjustment. R : Adjusts red intensity. G : Adjusts green intensity. B : Adjusts blue intensity. 4 4 9300ºK ● 2 6500ºK 1 2 9300ºK 6500ºK 4 1 2 9300ºK 6500ºK 4 1 2 9300ºK 6500ºK 1 2 R 63% R 63% R 63% G 63% G 63% G 63% B 63% B 63% B 63% User 2 : User set 2 for color temperature then select R, G or B for adjustment. R : Adjusts red intensity. G : Adjusts green intensity. B : Adjusts blue intensity.
E N Sub Menu-5: SPECIAL ● Manual Degauss : Discoloration of the image can be caused by gradual magnetization of the monitor components. This is particularly likely to occur when the monitor is moved or rotated. The monitor may "buzz" momentarily when the user control is selected and the image will change color and wobble for a few seconds. These effects are normal. 5 ● 5 Moire Cancellation : Moire effect may be found in some display modes.
Sub Menu-6: RECALL FACTORY PRESETS ● Recall : Recall brightness and contrast presets. 7 7 Recall : Recall size and phase presets. ● 7 7 Recall : Recall geometry preset. ● 7 7 ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu.
E N Data Storage (A) Factory preset mode: This monitor has 11 factory-preset modes as indicated in the following table: M01 M02 M03 M04 M05 M06 M07 M08 M09 M10 M11 Mode VGA VGA VGA VESA SVGA SVGA VESA VESA VESA VESA VESA Frequence Resolution H(KHz) V(Hz) 640x400 31.5 70 640x480 31.5 60 640x480 37.5 75 640x480 43.3 85 800x600 37.8 60 800x600 46.9 75 800x600 53.7 85 1024x768 48.4 60 1024x768 60.0 75 1024x768 68.7 85 1280x1024 64.
Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from keyboard, mouse or other input devices is detected, the monitor will automatically “wake up”.
E N Specification* (I) General CRT Screen size Dot pitch Phosphor Screen treatment Display area Factory preset Maximum usable Scanning frequency Horizontal (line) Vertical (frame) Input power Power consumption Input signal Video Sync Pedestal Tilt Swivel Physical Unit dimension (WxHxD) Net weight Operating condition Temperature Humidity Storage condition Temperature Humidity White Color Coordinates: Red: x= 0.625 y= 0.340 Green: x= 0.285 y= 0.605 : 17" (43.2 cm) flat & square : 0.
E N (II) Pin assignment: 1 6 11 5 10 15 The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. 1 2 3 4 5 6 7 8 Assignment Red video input Green video input Blue video input Ground Identical output - Connected to pin 10 Red video ground Green video ground Blue video ground Pin No. 9 10 11 12 13 14 15 Assignment No pin Self-test Ground Serial data line (SDA) H. Sync / H+V V.