9MDTR20(1-49).QX33 03.3.28 11:52 Page 1 OWNER’S MANUAL 19MDTR20/27MDTR20 COLOR TV WITH BUILT-IN VCR AND DVD P LAYER NEED HELP? CALL US! REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY. MAGNAVOX CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT. 1-800-705-2000 OR VISIT US ON THE WEB AT WWW.MAGNAVOX.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 2 Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 3 Safety and General Information 3 Safety Precautions Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 4 4 Table of Contents General Information Disc Features Safety and General Information . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Playable Discs and Videotapes . . . . . . . . . . . . . . . . .6 Remote Control Buttons . . . . . . . . . . . . . . . . .14-15 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19MDTR20(1-49).QX33 03.3.28 11:52 Page 5 Introduction 5 Welcome to your TV/VCR/DVD owner’s manual. This manual describes the 19MDTR20 and 27MDTR20. These two models are different sizes, but they operate identically. The 27MDTR20 is illustrated in this manual.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 6 6 Playable Discs and Videotapes Playable Discs The DVD Player of this TV/VCR/DVD will play many types of Discs, including Digital Video Discs (DVDs) and Audio Compact Discs (CDs). It will play MP3 and JPEG files as well. To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD Player of this TV/VCR/DVD.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 7 Before Using the TV/VCR/DVD 7 Remote Control Battery Installation 1 2 3 Remove the battery compartment lid on the bottom of the remote control. Slide the lid down and off. Follow the direction of the arrow on the lid. Place two AA batteries inside the battery compartment. Align the + and – ends as indicated. Replace the battery compartment lid.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 8 8 Hooking Up the TV/VCR/DVD 1 Hook up your TV/VCR/DVD using one of the connections shown. A Hooking Up Your TV/VCR/DVD with a Cable TV Signal or Outdoor Antenna Connect a Cable TV signal or an antenna to the ANT(enna) Jack. ANT. ANT. L AUDIO OUT R COAXIAL B Hooking Up Your TV/VCR/DVD with a Cable Box/Satellite Receiver To view any channel, set the TV/VCR/DVD to the output channel (channel 03 or 04) of the Cable Box/Satellite Receiver.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 9 Hooking Up the TV/VCR/DVD (cont’d) 9 C Hooking Up Your TV/VCR/DVD with an Indoor Antenna Indoor Antenna (not supplied, example only) To install an indoor antenna or “rabbit ears” (not supplied), connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR/DVD as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture. ANT. ANT.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 10 10 Optional Connections Analog Stereo Hookups If you want to hear the TV/VCR/DVD sound through a stereo instead, make this connection. 1 2 3 Audio cables to red and white AUDIO OUT jacks on TV/VCR/DVD Complete the antenna/Cable TV connections. Details are on pages eightnine. Connect red and white audio cables to the red and white AUDIO OUT jacks on the back of the TV/VCR/DVD and to the AUDIO IN jacks on the stereo. Match the cable colors to the jack colors.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 11 First-Time Setup,Watching TV 11 The TV/VCR/DVD can memorize available TV channels. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR/DVD. Set the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04 or AUX). Then select channels at the Cable Box or Satellite Receiver. These screens appear only the first time you turn on the TV/VCR/DVD.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 12 12 Playing a Videotape Follow these steps to simply play a videotape. Videotape playback options are on pages 34-40. STANDBY-ON PICTURE 1 Insert a videotape in the cassette compartment of the TV/VCR/DVD. The power will come on. If the tape’s record tab is missing, play should start automatically. SLEEP 1 2 3 4 5 6 7 8 CH. 9 +100 2 3 4 5 If play does not start automatically, press PLAY B to start play. Press STOP C to stop play.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 13 Playing a Disc 13 Before you begin, turn on the power of other equipment connected to the TV/VCR/DVD. Set a stereo (if applicable) to the correct sound source or channel. Details are on page 10. 1 2 3 4 Press STANDBY-ON to turn on the TV/VCR/DVD. The unit will be in TV/VCR mode. The red VCR/TV light will be on. 1 STANDBY-ON PICTURE 1 SLEEP 2 SELECT 3 4 7 5 6 8 9 +100 Press SELECT to put the TV/VCR/DVD in DVD mode.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 14 14 Remote Control Buttons PICTURE Button Press to access the picture controls. Details are on page 25. SLEEP Button Press to set the Sleep Timer. Details are on page 36. STANDBY-ON Button Press to turn on or off the TV/VCR/DVD. SELECT Button Press to choose TV/VCR or DVD mode. The corresponding light will appear on the front of the TV/VCR/DVD to indicate which mode is active. Details are on page 16.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 15 Remote Control Buttons (cont’d) 15 ZOOM Button Press to enlarge the picture during DVD playback. Details are on page 59. C.RESET (counter reset) Button Press to reset the tape counter to 0:00:00. Details are on page 36. Press to cancel a timer recording. Details are on page 31. SPEED Button Press to choose a tape recording speed (SP or SLP). Details are on page 26. CH. (channel) K/L Buttons Press to select memorized TV channels. Details are on page 11. VOL.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 16 16 Front Panel Cassette Compartment Insert a videotape here. Disc tray Insert a Disc here. CHANNEL K/L Buttons Press to select TV channels. Details are on page 11. OPEN/CLOSE A Button (DVD) Press to open or close the disc tray. Details are on page 13. STOP C Button (DVD) Press to stop Disc playback. Details are on page 13. VOLUME K/L Buttons Press to adjust the volume.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 17 Rear Panel 17 ANT. L AUDIO OUT R COAXIAL ANT. Jack (Antenna In) Connect an antenna or Cable TV signal here. This brings TV channels to the TV/VCR/DVD. If you do not connect an antenna or Cable TV signal to the TV/VCR/DVD (or connect to a Cable Box/Satellite Receiver through this jack), you will not receive any TV channels. Details are on pages eight-nine. Power Cord Connect to a standard AC outlet (120V/60Hz).
19MDTR20(1-49).QX33 03.3.28 11:52 Page 18 18 Menu Language, Resetting TV Channels Menu Language This affects the language of the TV/VCR/DVD’s setup menus and on-screen display terms. It does not alter the language of TV programming, videotapes, Discs, or closed captioning. 1 2 STANDBY-ON PICTURE Press SETUP once so the TV/VCR SETUP menu appears. 1 2 3 4 5 6 7 8 0 +10 C.RESET ZOOM – TV/VCR SETUP – 3 4 Press SETUP to exit the menu.
MDTR20(1-49).QX33 03.3.28 11:52 Page 19 Adding/Deleting Channels 19 You can delete TV channels you no longer receive or seldom watch. Or, you can add more channels if the TV/VCR/DVD did not memorize all your favorite channels. ● Before you begin, press SELECT to put the TV/VCR/DVD in TV/VCR mode. The red VCR/TV light will appear. 1 2 SLEEP 1 2 3 4 5 6 7 8 SELECT CH. Press SETUP. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE Press ▲ or ▼ to select CHANNEL SET UP. Then, press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 20 20 Setting the Clock Manual Clock Setting You must set the clock before you can do a timer recording. Set the clock manually. Afterward, use Auto Clock to monitor the time. Details are on pages 22-23. If you do not receive a PBS station that carries time signals, you cannot use Auto Clock. Set AUTO CLOCK to OFF. The time will remain as you set it manually. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 CH. 9 +100 Before you begin ...
19MDTR20(1-49).QX33 03.3.28 11:52 Page 21 Setting the Clock (cont’d) 21 5 While the DAY space is flashing, press ▲ or ▼ until the correct day appears. Then, press B. An abbreviation for the selected day of the week will appear. STANDBY-ON PICTURE YEAR 05 / 07 - - HOUR -- 6 MONTH DAY 7 7 8 9 +100 0 +10 C.RESET ZOOM VOL.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 22 22 Setting the Clock (cont’d) Auto Clock Setting You can have the TV/VCR/DVD adjust the clock using your PBS channel. Once you set the clock manually, the TV/VCR/DVD will monitor the correct time and date broadcast by the PBS station. Before you begin ... ● Turn on the TV/VCR/DVD power. ● Connect the antenna/Cable TV signal. Details are on pages eight-nine. ● Turn on the Cable Box/Satellite Receiver (if applicable). ● Set up the TV channels.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 23 Setting the Clock (cont’d) 23 4 If you already know your PBS channel number, skip ahead to step 8. If you do not know the channel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH. Then press ENTER. 11 STANDBY-ON PICTURE 1 2 3 4 5 6 7 ● The TV/DVD/VCR will search for a channel that carries a time signal. Channels that carry the time will appear at the top of the screen.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 24 24 Daylight-Savings Time When Daylight-Savings Time (D.S.T.) is ON, the clock will move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below. ● Before you begin, press SELECT to put the TV/VCR/DVD in TV/VCR mode. The red VCR/TV light will appear. 1 2 2 3 4 5 6 7 8 Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 25 Status Displays, Picture Controls 25 Status Displays To see the Videotape Counter, Clock, or Channel number on the screen in TV/VCR mode, press DISPLAY repeatedly. The following will occur when Closed Captions are OFF. 1 STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. Press DISPLAY once to see the Videotape counter. After five seconds, only the counter will remain on the screen. 9 +100 STOP SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 26 26 Videotape Recording 1 Place a tape with its record tab intact in the cassette compartment of the TV/VCR/DVD. The TV/VCR/DVD power will come on. If the power is already on and a videotape is in the unit, make sure the unit is in TV/VCR mode. Press SELECT so the red VCR/TV light appears on the front of the unit. 1 Put a videotape in the TV/VCR/DVD.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 27 One-Touch Recording 27 A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. STANDBY-ON PICTURE Before you begin ... ● Turn on the TV/VCR/DVD. ● Press SELECT to put the unit in TV/VCR mode. The red VCR/TV light will appear on the front of the unit. ● Insert a videotape with its erase prevention tab in place. Details are on page seven. Rewind or fast forward the tape to the point at which you want to begin recording.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 28 28 Timer Recording Follow the steps below to program the TV/VCR/DVD to record TV programs while you’re away from home. The TV/VCR/DVD will record and turn itself off automatically. You can set a maximum of eight timer recordings. Before you begin, make sure ... ● The clock is set. If the clock is not set, the MANUAL CLOCK SET menu will appear. See pages 20-21 to set the clock. ● Channels are set. Details are on page 18. ● A tape is in the TV/VCR/DVD.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 29 Timer Recording (cont’d) 29 4 While DATE is selected, press ▲ or ▼ until the correct date appears. Recording will happen once. STANDBY-ON PICTURE – TIMER PROGRAMMING – SLEEP 1 2 3 4 5 6 7 8 SELECT CH. CH ---B 61 ----- DATE - /- - - - - /- - - - - /- - - - 7/ 04 FRI - /- - - - - /- - - - - /- - - - - /- - - - - BEGIN - :- - :- - :- - :- - :- - :- - :- - :- - END - :- - :- - :- - :- - :- - :- - :- - :- - --------- 9 +100 SPEED 0 +10 C.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 30 30 Timer Recording (cont’d) 6 While END is selected, press ▲ or ▼ to select the hour at which you want recording to stop. AM or PM will appear with the hour. Then, press B and press ▲ or ▼ to select the minute at which you want recording to end. Press B.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 31 Timer Recording (cont’d) 31 Extending a Timer Recording To make a Timer Recording start and end later than originally scheduled, follow these steps. 1 With the unit on, press SETUP. Press ▲ or ▼ to select TIMER PROGRAMMING. Press ENTER. 2 Press RECORD, then press ▲ or ▼ to select the desired program. 3 Press RECORD again. Each press of RECORD will shift forward the beginning/end time by 10 minutes.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 32 32 Timer Recording Auto Return Use this feature to rewind the tape to the beginning of a completed timer recording. STANDBY-ON PICTURE 1 2 SELECT 1 2 3 4 5 6 7 8 CH. SPEED 0 +10 C.RESET ZOOM VOL. MUTE – TV/VCR SETUP – Press ▲ or ▼ to select AUTO RETURN. 9 +100 Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 33 Rerecording (Tape Duplication) 33 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) VIDEO AUDIO OUT OUT Audio Cables from AUDIO OUT to AUDIO In OP/EJECT HEADPHONE VIDEO L AUDIO R L R Video Cable from VIDEO OUT to VIDEO In 1 Make the connections shown above. Use audio and video cables (not supplied). Connect the source unit (VCR or Camcorder) to a power source after connections are made. 2 3 The VCR or Camcorder will play your tape.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 34 34 Repeat Play Repeat Play allows you to play a videotape continuously. ALL REPEAT will repeatedly play the tape from the beginning to the end. BLANK REPEAT will repeatedly play the tape from its beginning to the first part that is blank for more than 10 seconds. 1 2 SLEEP 1 2 3 4 5 6 SELECT CH. Press SETUP. 7 8 9 +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 35 Rental Play 35 This function enables you to improve picture quality when playing worn cassettes such as rented videotapes. STANDBY-ON PICTURE 1 2 Press SETUP. 1 2 3 4 5 6 7 8 SELECT CH. Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 36 36 Zero Return, Sleep Timer Zero Return The videotape counter shows the elapsed recording or playback time in hours, minutes, and seconds from the point at which the counter was set to zero. The counter time will not change on a blank tape or blank portions on a tape. The “–” before the tape counter indicates the amount of remaining recording/playing time before the counter reaches zero.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 37 Time Search 37 Time Search lets you quickly advance the videotape to a position simply by entering the amount of playback time you want to skip. In the example below, Time Search is set to 2 hours, 50 minutes from the present position. 1 2 Insert a videotape. STANDBY-ON PICTURE Insert a videotape. SLEEP 1 2 3 4 5 6 7 8 SELECT CH. Press SETUP. Press ▲ or ▼ to select TIME SEARCH. Then, press ENTER. 9 +100 SPEED 0 +10 C.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 38 38 Index Search This feature lets you quickly rewind or fast forward to the start of recordings. ● Index Marks are made automatically at the start of all recordings. They are not made where recording pauses. The time gap between Index Marks should be greater than one minute for SP recording and three minutes for SLP recording. This means recordings should be one (SP) or three (SLP) minutes long. Otherwise, Index Search may not find the start of the recording.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 39 Videotape Playback Features 39 Slow Motion 1 Press k (pause) during play to pause the videotape. Then press i / g to start slow motion. Sound will be mute during slow motion. Slow motion will stop automatically after five minutes to prevent damage to the tape. POWER PICTURE SLEEP 1 2 3 4 5 6 7 8 CH. 9 +100 2 SELECT Press PLAY B to return to normal playback. SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 40 40 Automatic Operation Features The following videotape features are available. Automatic Rewind, Eject, Off When you play, fast forward, or record a videotape to its end, the TV/VCR/DVD will rewind the tape, stop, turn itself off, and eject the tape. If REPEAT PLAY is activated, play will start again instead. Details are on page 34. The tape will not rewind automatically after a timer recording or One-Touch Recording ends.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 41 Closed Captions 41 Follow the steps below to select closed captions for TV programming. Not all TV programs and commercials have closed captions or all types of closed captions (second language, half-screen text, etc.). If closed captioning is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR/DVD. Check your TV program listings for shows with closed captions.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 42 42 Setting V-Chip TV Rating Settings V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, a “PROTECTED PROGRAM by ...” message appears on the TV screen.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 43 Setting V-Chip (cont’d) 43 4 Press ▲ or ▼ to select the TV Rating level at which you want to block viewing, then press ENTER once. If you press ENTER again, the subratings for that category will appear. Details are on pages 44-45. When you select the rating category and set it to BLOCK, the higher ratings will turn to BLOCK automatically. Lower ratings will turn to VIEW.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 44 44 Setting V-Chip (cont’d) TV Rating Subratings When you select TV-Y7, TV-PG, TV-14, or TV-MA, you can use the subratings to block specific elements of programming, such as language or violence. 1 2 Press SETUP. STANDBY-ON PICTURE 3 1 2 3 4 5 6 7 8 SPEED Press ▲ or ▼ to select V-CHIP SET UP. Press ENTER. – TV/VCR SETUP – ACCESS CODE – – – – 4 9 Press ▲ or ▼ to select TV RATING. Press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 45 Setting V-Chip (cont’d) 45 5 Press ▲ or L to select the rating you wish to adjust. Then, press ENTER twice to go to its subratings. TV-Y7 B FV [BLOCK] STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 SELECT CH. Example: TV-Y7 subratings 7 8 9 [BLOCK] +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE ● When you select TV-Y7: Press ▲ or ▼ to select FV (Fantasy Violence, violence that seems realistic to young children).
19MDTR20(1-49).QX33 03.3.28 11:52 Page 46 46 Setting V-Chip (cont’d) MPAA Rating Settings You can block TV channel viewing according to the Motion Picture Association ratings. To do so, follow these steps. 1 2 Press SETUP. Press ▲ or ▼ to select V-CHIP SET UP. Then, press ENTER.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 47 Setting V-Chip (cont’d) 47 Changing the Access Code Although the default code 0000 is supplied with the TV/VCR/DVD, you can set your own access code. 1 2 3 Press SETUP. 3,5 Press ▲ or ▼ to select V-CHIP SET UP. Then, press ENTER. SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE Press the Number buttons to enter the old access code. When doing this for the first time, use 0000.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 48 48 Multi-Channel Television Sound 1 Press DISPLAY to see the sound status. During TV viewing, press DISPLAY twice. During tape play, press DISPLAY once. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. STOP HIFI 12:00AM CH 123 STEREO/SAP 9 +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE SP COUNT 0:00:00 PLAY STOP When a TV program is broadcast in stereo, STEREO appears in the top right corner of the screen.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 49 Multi-Channel Television Sound (cont’d) 49 Selecting HiFi or Monaural Sound You can play videotapes in either High Fidelity (HIFI) or Monaural (MONO or single-channel) sound. To do so, follow these steps. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 1 2 Press SETUP. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL. MUTE Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 50 50 Multi-Channel Television Sound (cont’d) Setting the TV/VCR/DVD to receive or record TV programs in Stereo, Second Audio, or Monaural Sound STANDBY-ON PICTURE Because TV channels can broadcast in Stereo or Second Audio, set the TV/VCR/DVD to receive and record the channels in the sound mode you prefer. SLEEP 1 2 3 4 5 6 7 8 CH. 9 +100 SPEED 1 Press SETUP. Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 51 Disc Menus,Title Menus 51 Disc Menus Some DVDs contain menus that describe the contents of the Disc or allow you to customize Disc playback. For example, the menu may offer choices for subtitle languages, special features, or scene selection. To use the DVD Disc menu and select playback features, follow these steps. ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 SELECT CH.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 52 52 Fast Forward/Reverse Search 1 During Disc play, press and hold i/g or j/h on the remote for two seconds. ● During DVD play, pressing and holding i/g or j/h will forward or reverse the picture at two, eight, 50, or 100 times the normal playback speed. An h 2, h 8, h 50, or h 100 will appear briefly on the TV screen to indicate reverse searching. Or, g 2, g 8, g 50, or g 100 will appear briefly on the TV screen to indicate fast forward searching.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 53 Title/Chapter Playback,Time Playback 53 Title/Chapter Playback 1 During DVD play, press SEARCH MODE until CH (for Chapter) or TT (for Title) appears on the TV screen. The number of available Titles or Chapters will appear at the right ( /4, for example). STANDBY-ON PICTURE 2 _/4 SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 54 54 Track Play There are three ways to play a Track on an Audio CD. Use the Number buttons, the SEARCH MODE button, or i/g and j/h . ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. Make sure an Audio CD is in the disc tray. STANDBY-ON PICTURE A-B 1 2 3 4 5 6 8 9 +100 A SELECT CH. 7 Using the Number Buttons Press the Number buttons to enter a Track number. Play will start at the selected Track.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 55 Paused and Step-by-Step Play, Resume On 55 Paused and Step-by-Step Play 1 2 STANDBY-ON PICTURE During Disc play, press F (pause). Play will pause and the sound will be mute. SLEEP 1 2 3 4 5 6 SELECT CH. When playing a DVD, press F (pause) repeatedly to see the picture advance one frame (or step) at a time. The sound will remain mute. Pressing PAUSE repeatedly during Audio CD, MP3, or JPEG play will have no effect.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 56 56 Repeat Play, A-B Repeat Play Repeat Play 1 During DVD or Audio CD play, press REPEAT until the repeat mode you want appears on the TV. On a DVD, select CHAPTER, TITLE, or OFF. On an Audio CD, select TRACK, ALL (all Tracks on the Disc), or OFF. With MP3 files you can select TRACK, ALL, or GROUP (all Tracks in the current Folder). Selecting a new Track, Chapter, or Title will cancel repeat play.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 57 Markers 57 Use Markers to remember your favorite places on an Audio CD or DVD. To set the Markers, follow these steps. STANDBY-ON PICTURE 1 Play the Disc to within 30 seconds prior to the point at which you want to set the Marker. During play, press SEARCH MODE until the Markers appear at the top of the TV screen. SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 58 58 Subtitles, Camera Angles Subtitles You can select a language for DVD subtitles during playback. You may select only the subtitles that are available on the Disc. 1 During play, press SUBTITLE to select a subtitle language. The number of available languages appears at the right of the subtitle display. In the example below, six languages are available ( /6). After a few seconds, the subtitles will appear. Or, press SUBTITLE repeatedly to turn off subtitles.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 59 Slow Motion, Zoom 59 Slow Motion 1 2 Press F (pause) during DVD play. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. Press and hold i/D or H/h for two seconds. Slow motion play will begin. Press and hold i/D or H/h repeatedly during slow motion play to play the DVD forward or backward at 1/16, 1/8, or 1/2 the normal speed. 1/2 Example: Playing a DVD forward at half the normal speed. 1 2 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 60 60 Parental Password The Parental feature prevents viewing of DVDs that exceed your rating limits. This feature will not limit viewing if the DVD is not rated or coded. Check your DVDs and settings before letting children access the TV/VCR/DVD. Follow these steps to change your password. ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. STANDBY-ON PICTURE 3 SLEEP 1 2 3 4 5 6 7 8 CH.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 61 Parental Password (cont’d) 61 4 Press p to select CHANGE, then press ENTER. PARENTAL STANDBY-ON PICTURE 5 PARENTAL LEVEL ALL CHANGE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 OK SPEED 0 +10 C.RESET ZOOM VOL. MUTE 5 6 Press the Number buttons to enter a four-digit password. The password numbers will appear on the screen. Write down the password so you will not forget it. Press ENTER. The previous menu will reappear.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 62 62 Parental Levels Follow these steps to set the rating level for your DVDs. DVDs whose ratings exceed the level you set will not play. ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. 1 Press SETUP twice while play is stopped. QUICK SETUP TV MODE DOLBY DIGITAL 4:3 LETTER BOX ON OK 2 Press B to select CUSTOM at the top of the menu, then press ENTER. STANDBY-ON PICTURE 4 2-3, 5 1 SLEEP 1 2 3 4 5 6 7 8 SELECT CH.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 63 Parental Levels (cont’d) 63 6 Press o or p to select a level, then press ENTER. The rating levels continue on two menu screens. Press o or p repeatedly to move to the next or previous screen to find the rating level you want. After making your selection, the previous menu will appear. The level you selected will appear beside PARENTAL LEVEL. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 64 64 Audio Language, Stereo Sound Audio Language You can select a language for DVDs during play if multiple languages are available. 1 STANDBY-ON PICTURE During DVD play, press AUDIO repeatedly to choose one of the available languages. The new audio will be heard. The display will disappear after about five seconds. The Audio display may show if the DVD has Dolby Digital or multi-channel (5.1 CH) sound or show its sampling rate (48k, for example).
19MDTR20(50-80).QX33 03.3.28 11:59 Page 65 Random Play, Programmed Play 65 Random Play You may play the Tracks of an Audio CD in Random order instead of the order in which they are recorded (1,2,3...). You can also use this feature for JPEG and MP3 files. 1 STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. While play is stopped, press MODE until the RANDOM screen appears. 9 +100 RANDOM CD [AUDIO] SPEED TOTAL 0:45:55 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 66 66 MP3/JPEG Playback The DVD Player will play MP3 or JPEG files that you record and finalize on a CD-RW (Compact Disc-Rewritable) or CD-R (Compact Disc-Recordable). These Discs may contain pictures in a JPEG format or audio Tracks in an MP3 format. For example, you may have photographic film developed by a retailer that places the pictures on a CD-R for you. These pictures may be in JPEG format.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 67 MP3/JPEG Displays 67 You can review MP3 and JPEG Track (File) information during playback. STANDBY-ON PICTURE 1 Press DISPLAY until the current Track/File number, total Tracks/Files available, and elapsed playing time of the current Track appear. The elapsed playing time will not show during JPEG play. SLEEP 1 2 3 4 5 6 SELECT CH. 7 8 9 +100 2 / 25 0:01:15 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 13:07 Page 68 68 Language Settings You can use the LANGUAGE settings to select different languages for the Audio or Subtitles of DVDs, as well as languages for DVD Disc menus. ● STANDBY-ON PICTURE Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. While play is stopped, press SETUP twice. The QUICK SETUP screen appears. SLEEP 1 2 3 4 5 6 SELECT CH. 1 7 8 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 69 Language Settings (cont’d) 69 5 Press o or p to select a language, then press ENTER. The language lists may continue on multiple screens. Press o or p to move to the other screens. ● If you select OTHER, press four Number buttons to enter the code for the language you desire. Use the Language Codes below. The language or language code you select will appear in the Language menu beside AUDIO, SUBTITLE, or DISC MENU.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 70 70 Display Settings You can adjust TV Mode, Angle Icon, and Automatic Power Off in the Display menu. ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. 1 STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 CH. When play is stopped, press SETUP twice. The QUICK SETUP screen will appear. 9 +100 SPEED 0 +10 C.RESET ZOOM 4:3 LETTER BOX ON OK 2 VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 71 Display Settings (cont’d) 71 4 Press o or p to select an item, then press ENTER. ● If you selected TV MODE, press o or p to select a setting, then press ENTER. Choose 4:3 LETTER BOX if you want to see the entire, widened picture with black bars at the top and bottom of the screen. This looks like the picture you see when watching movies in a theater. This setting is possible only if the DVD was recorded in the letterbox or widescreen format.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 72 72 Audio Settings Change Audio settings based on other equipment you connected to the TV/VCR/DVD or according to your Disc sound features. ● Before you begin, press SELECT to put the TV/VCR/DVD in DVD mode. 1 STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. While play is stopped, press SETUP twice. The QUICK SETUP screen will appear. 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 73 On-Screen Displays 73 DVD Display 1 Press DISPLAY repeatedly to see the following displays during DVD play. STANDBY-ON PICTURE SLEEP 1 2 3 4 5 6 7 8 SELECT CH. CH 7/49 0:01:46 - 0:03:27 Elapsed playing time of the current Chapter; remaining playing time of the current Chapter CH (Chapter): Current Chapter number / total Chapters 9 +100 SPEED 0 +10 C.RESET ZOOM VOL.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 74 74 Black Level,Virtual Surround Black Level Adjust Black Level to brighten the DVD picture. STANDBY-ON PICTURE 1 During DVD play, press MODE so the Black Level icon shows in the top left corner of the TV screen. SLEEP 1 2 3 4 5 6 7 8 SELECT CH. 9 +100 ON SPEED 0 +10 C.RESET ZOOM VOL. MUTE 2 Within 10 seconds, press ENTER to choose ON or OFF. ON brightens the dark parts of the picture. OFF shows the original picture as recorded.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 75 Glossary 75 AUDIO In Jacks: red and white jacks on the front of the TV/VCR/DVD which are used to receive or record audio from another source (VCR, Camcorder, etc.). Automatic Channel Setup: process in which the TV/VCR/DVD memorizes all available TV channels. Then, when you push the CH. ▲/▼ buttons, you only scan through channels you receive.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 76 76 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. Location For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 77 Helpful Hints (cont’d) 77 Disc cannot play. • Insert a playable Disc. Make sure the Disc is labelled for Region 1 or ALL regions and is NTSC compatible. Details are on page six. • Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label facing up. If the Disc is two-sided, make sure the label of the side you want to play is facing up. • Clean the Disc. Make sure the Disc is not scratched or warped.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 78 78 Specifications General TV/VCR Electrical Specifications CRT: 19MDTR20: Sound output: 19 inch in-line gun, 90˚ deflection tube 27MDTR20: 27 inch in-line gun, 110˚ deflection tube Closed Caption system: §15.119/FCC Video Heads: Rotary four-head Tape width: 1/2 inch Tape speeds SP 33.40 mm/sec. LP 16.67 mm/sec. SLP 11.12 mm/sec.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 79 Limited Warranty 79 TV/VCR/DVD COMBINATION 90 Days Free Labor/One Year Parts Exchange The 27MDTR20 can be repaired in-home. The 19MDTR20 should be carried in for repair. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
19MDTR20(50-80).QX33 03.3.28 11:59 Page 80 80 Index a-b repeat . . . . . . . . . . . . . . . . . .56 angle button . . . . . . . . . . . . . .15, 58 ant(enna) jack . . . . . . . . . . . .8-9, 17 arrow buttons . . . . . . . . . . . . . . .14 audio button . . . . . . . . . . . . .15, 64 audio cd . . . . . . . . . . . . . . . . . .6, 54 audio in/out jacks . .9-10, 16-17, 33 audio settings (dvd) . . . . . . . . . . .72 auto return . . . . . . . . . . . . . . . . .32 automatic rewind, eject . . . . . . . .