Owner’s Manual Manuel du Propriétaire Manual del Propietario 22ME360B 19ME360B LCD TV English Français 1-866-341-3738 MODEL NUMBER SERIAL NUMBER 1-866-341-3738 Español 1-866-341-3738
Return your Product Registration Card or register online at www.magnavox.com/support today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable beneÀts listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.
English IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
English Features Contents 3 4 INTRODUCTION 5 6 6 6 6 6 7 8 9 9 PREPARATION 10 10 11 14 15 WATCHING TV 16 16 16 16 17 17 18 18 18 Main Menu Autoprogram Channel List Add Channels Antenna ConÀrmation Language Selection Picture Adjustment Sound Adjustment Closed Caption Child Lock PC Settings Fun-Link Energy Saving Mode Location Current Software Info 19 19 20 20 21 21 22 22 24 27 29 30 31 31 31 INFORMATION OPTIONAL SETTING TROUBLESHOOTING Sleep Timer Switching Each Input Mode Freeze Mode Channel Sele
Attaching the Base Tilting the unit You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. You can adjust the base to change the angle of the unit (-2° to 10°). 1 2 3 Spread a thick and soft cloth over a table as shown. Place the main unit face down onto it. Make sure not to damage the screen. Insert the metal neck under the bottom of the main unit into base holes.
English INTRODUCTION Control Panel 1 Illuminance sensor window PREPARATION Alters the brightness of the TV screen automatically by detecting your room lighting level. Do not block anything in front of its window to work properly. 2 Power on indicator Lights up green when power is on. 3 Infrared sensor window 4 VOLUME +/ñ 4 5 MENU 5 6 CHANNEL +/ñ 6 7 POWER ➠ ➠ p.19 ➠ p.15 p.16 Press to select channels or move up (+) / down (–) through the main menu items.
Terminals 11 * Side Panel 8 HDMI 2 Input jack 9 Composite Video / Audio (L/R) Input jacks for VIDEO ➠ p.10, 11 ➠ p.12 10 Headphone Audio Output jack Headphone connection for personal listening. HDMI 2 8 Rear Panel 11 Antenna Input jack 12 AC power cord Inlet 13 PC (VGA) Input jack 12 13 9 14 10 ➠ ➠ ➠ ➠ p.10 p.14 p.13 14 HDMI 1 Input jack p.10, 11 15 Component Video and Audio (L/R) Input jacks ➠ p.10, 12 15 16 17 16 Digital Audio Output jack ➠ p.
English 4 5 2 SAP 10 3 SOURCE 11 4 FREEZE Press to freeze screen image. 12 5 OK 13 6 ɼ/ɾ/ɿ/ɽ(cursor) ➠ p.15 ➠ p.15 ➠ p.18 9 PREV CH Press to return to previously viewed channel. 14 17 19 9 14 INFO ➠ p.18 15 REV E / FWD D ➠ p.30 Press to search backward or forward through the disc. PLAY B ➠ p.30 Press to begin the disc playback. SKIP H / SKIP G ➠ p.30 Press to skip backward or forward chapters, titles or tracks of the disc. PAUSE F ➠ p.30 Press to pause the disc playback. STOP C ➠ p.
PREPARATION No supplied cables are used with these connections: Please purchase the necessary cables at your local store. Use an HDMI cable with the HDMI logo (a certiÀed HDMI cable). High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
English HDMI-DVI Connection Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack. HDMI Connection e.g.) e.g.) audio cables cable receiver or satellite box with the DVI output jack BD/DVD recorder with the HDMI output jack AUDIO OUT L R STEREO PCM HDMI OUT TITLE 5 CHAPTER 15 REPEAT A-B PREPARATION HDMI connection offers the highest picture quality.
Component Video Connection Composite Video Connection Component Video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component Video Input jacks, connect audio cables to the Audio L/R Input jacks right beside the Component Video connector. Composite Video connection offers standard picture quality for video devices connected to the unit.
English PC Connection (for digital broadcasting only) If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices. This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well. e.g.
Use the following accessary with this connection: • AC power cord x 1 Plug In the AC Power Cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed. rear of this unit AC outlet AC power cord Caution: • Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in Àre or electrical shocks.
English 4 Use ɿ/ɽ to select the desired location setting, then press OK. Initial Setup Select “Retail” or “Home” for your location. Initial Setup Select Make sure the unit is connected to antenna or cable. After making all the necessary connections, press to turn on the unit. Use ɼ/ɾ to select [Antenna] for TV channels or [Cable] for CATV channels, then press OK. Make sure the antenna is connected to ''ANT. IN'' jack. Select your signal source. Antenna Cable Skip provider.
WATCHING TV Sleep Timer can be set the unit to go to the stand-by mode after an incremental period of time. Press SLEEP repeatedly to change the amount of time (increases the time by 30 minutes up to 120 minutes). Sleep 120min. Press SLEEP once to call up the display for checking the remaining time. • To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is displayed.
English INTRODUCTION TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal Normal displays a 16:9 picture at its original size.
TV Screen Information Reducing the Brightness You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Backlight brightness can be reduced which may save on power consumption more than you just set [On] in [Energy Saving Mode]. ➠ p.31 Press INFO. Press ECO once to reduce the brightness.
English Main Menu Picture Press MENU. Sound Setup Language Before you begin: Make sure the unit is connected to antenna or cable. 1 2 3 4 Press MENU to display the main menu. Use ɼ/ɾ to select [Setup], then press OK. Use ɼ/ɾ to select [Autoprogram], then press OK. Use ɼ/ɾ to select an appropriate option, then press OK. Picture Features Select your signal source. Language Antenna Back Antenna Cable Or Cable ANT.IN • When connected to VHF / UHF antenna, select [Antenna].
Channel List Add Channels The channels selected here can be skipped when selecting the channels using CH + / – . Those channels can still be selected with the Number buttons. This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting. 1 2 3 4 1 2 3 4 Press MENU to display the main menu. Use ɼ/ɾ to select [Setup], then press OK. Use ɼ/ɾ to select [Channel List], then press OK.
English Language Selection ATSC This function lets you check the digital signal strength of each channel. 1 2 3 Press MENU to display the main menu. Use ɼ/ɾ to select [Setup], then press OK. Use ɼ/ɾ to select [Antenna], then press OK. Press MENU to display the main menu. Use ɼ/ɾ to select [Language], then press OK. Use ɼ/ɾ to select [English], [Español] or [Français], then press OK. Use the Number buttons or CH + / – to select the channel for which you want to check the digital signal strength.
Picture Adjustment Brightness, Contrast, Color, Tint, Sharpness, Color Temperature You can adjust picture mode, or customize the picture quality as your preference. You can only adjust the following options when you set to [Personal] in [Smart Picture]. Before you begin: You must set [Home] in [Location]. ➠ p.31 Otherwise, the settings you adjusted will not be memorized after the unit goes to the stand-by mode. 1 2 3 Use ɼ/ɾ to select the desired setting, then use ɿ/ɽ to adjust.
English TV Speakers Smart Sound Select the audio output from the unit’s speakers, or not. If your ampliÀer is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure [Fun-Link Control] is set to [On]. ➠ p.30 Use ɼ/ɾ to select the desired setting, then press OK.
Closed Caption A. Caption Service You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed on-screen. 1 2 3 4 5 Use ɼ/ɾ to select [Caption Service], then press OK. Use ɼ/ɾ to select the desired closed caption, then press OK. Press MENU to display the main menu. Use ɼ/ɾ to select [Features], then press OK. Use ɼ/ɾ to select [Closed Caption], then press OK.
English C. Caption Style ATSC ATSC You can change the caption style such as font, color or size, etc. 4 4 Use ɼ/ɾ to select [Caption Style], then press OK. 5 Use ɼ/ɾ to select [User Setting], then press OK. 5 Use ɼ/ɾ to select the desired digital caption service, then press OK.
Font Style Background Opacity Closed Caption Closed Captioning font style can be changed as illustrated. Closed Caption Background opacity of the displayed caption can be switched as illustrated. Solid Flash Translucent Transparent Font Size Font size of the displayed caption can be switched as illustrated. Edge Color Closed Caption Edge color of the displayed caption can be switched as illustrated.
English A. Channel Lock Child lock reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible. Press MENU to display the main menu. Use ɼ/ɾ to select [Features], then press OK. Use ɼ/ɾ to select [Channel Lock], then press OK. Use ɼ/ɾ to select the desired rating, then press OK repeatedly to switch between [View] and [Block].
C. Setting TV ratings 5 6 D. Change PIN Use ɼ/ɾ to select [US TV Ratings Lock], then press OK. Use ɼ/ɾ / ɿ/ɽ to select the desired rating, then press OK repeatedly to switch between [View] and [Block]. Picture FV Sound TV-MA Setup TV-14 Features TV-PG Language TV-G V S L Although the default PIN code (0000) is supplied with the unit, you can set your own PIN code. 5 6 D Use ɼ/ɾ to select [Change PIN], then press OK. Press the Number buttons to enter the new 4-digit PIN code.
English Clock, Phase Use ɿ/ɽ to adjust [Clock] setting to stabilize the PC screen and [Phase] setting to improve the clarity of the PC screen. This function lets you adjust the PC screen position, clock and phase during PC input. Press MENU to display the main menu. Cursor s Use ɼ/ɾ to select [Features], then press OK. Clock Use ɼ/ɾ to select [PC Settings], then press OK. 0 Adjust Use ɼ/ɾ to select the setting you want to adjust, then press OK.
Fun-Link Auto TV On This unit will turn on detected when the power on signal is sent from your connected Fun-Link device. Use ɼ/ɾ to select the desired setting, then press OK. This function allows you to operate the linked functions between our brand devices with a Fun-Link feature and this unit connecting through an HDMI cable. 1 2 3 Press MENU to display the main menu. Picture On Use ɼ/ɾ to select [Features], then press OK. Sound Off Use ɼ/ɾ to select [Fun-Link], then press OK.
English Current Software Info You can set whether the power consumption is saved or not. This function shows what version of the software currently used. Press MENU to display the main menu. Use ɼ/ɾ to select [Features], then press OK. Use ɼ/ɾ to select [Energy Saving Mode], then press OK. Use ɼ/ɾ to select the desired mode, then press OK. 1 2 3 4 On Sound Off Setup Features Use ɼ/ɾ to select [Features], then press OK. Use ɼ/ɾ to select [Current Software Info], then press OK.
TROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this manual, check the following chart and all connections once before calling for service. Symptom No power Control button does not work. Power is ON but no screen image. Remedy • • • • • • • • • • • • • • No picture or sound • • • • • No color Adjusted [Picture] or [Sound] settings are not effective every time the unit is turned on.
English INTRODUCTION You see "noise" or "trash" on the screen. You switch to a different input and the volume changes. • View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation. • • This unit will memorize the volume level from the last time you adjusted it. If the volume of the sound from another device is higher or lower, then the loudness will change.
FAQ Question Answer • • • • My remote control does not work. What should I do? • • • • • How come the Initial setup appears every time I turn on this unit? Why I cannot watch some RF signal TV programs. • • Connect the RF coaxial cable to the unit directly and run the initial setup. Make sure to complete the channel scan before the unit goes to the stand-by mode. • • Make sure [Autoprogram] has been completed. ➠ p.
English Glossary Maintenance INTRODUCTION INFORMATION ATSC Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height). This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is.
General SpeciÀcations Other SpeciÀcations TV format ATSC / NTSC-M TV standard Closed caption system §15.122 / FCC (digital CC) §15.119 / FCC (analog CC) Channel coverage (ATSC / NTSC) Terrestrial DTV (ATSC) VHF 2~13 UHF 14~51 each channel has e.g.) 2.1~2.9, 3.1~3.9, etc.
English Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.