Operation Manual

20
EN
Channel List
The channels selected here can be skipped when selecting the
channels using CH + /
–
.
Those channels can still be selected with the Number buttons.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Channel List], then press OK.
4 Use ɼ/ɾ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup
Features
Language
Highlight channels for Ch Up / Down key selection.
DTV 11.1
DTV 11.2
DTV 11.3
Ch Select
OK
Watch/Skip
BACK
Back
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + /
–
.
• To reactivate a removed channel, use ɼ/ɾ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
5 Press MENU to exit.
Note
•
The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the channels that were not added
by the autoprogram due to reception conditions at the initial
setting.
1 Press MENU to display the main menu.
2 Use ɼ/ɾ to select [Setup], then press OK.
3 Use ɼ/ɾ to select [Add Channels], then press OK.
4 Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
Setup
Features
Language
For analog channels, select a channel to be
added using number keys.
For digital channels, you must perform
Autoprogram function.
Add channels
Ch Change
BACK
Back
11
5 Press MENU to exit.
Note
•
If setup completes successfully, [Added to the channel list] is displayed.
•
If external input is used, it is not possible to register the channel and
[Unavailable] will be displayed on the TV screen.
•
By using CH + / – , you can select the memorized channels only.