39ME412V 32ME402V 26ME402V 22ME402V 19M E402V Thank you for choosing Magnavox Read your Owner's Manual first for quick tips that make using your Magnavox produce more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.magnavax, comlsuppart or call I 866 341 3738 while with your product (and Model / Serial number) vous remerc votre confiance. ivlagaavox.
Contents I Notice s 6 Upgrade yourTV software Checking your current software version 2 Important 6 Positioning theTV 6 Regulatory notices 6 Environmental 6 care Upgrading the software 7 Connecting Connecting 3 Get started 7 accessories Symbols used in this Owner's Manual Attaching the base Useful FAQ 7 Troubleshooting 32 Mounting the unit on your furniture 8 g 8 Remote control 9 panel I0 Connecting the antenna or the cable 11 Plugging in the AC power cord 11 Initial setu
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Know these sQfe'ty Card at once or visit at www.magnavox.
1. Read these instructions. 2. Keep these instructions. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation manufacturer's instructions. 8.
1 Notice MAGNAVOX Modifications This apparatus may generate or use radio frequency is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America. Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this Owner's intended use of the system.
2 Important Environmental care Positioning the TV Large screen TVs are heavy, 2 people are required to carry and handle a large screen T_. The packaging of this product is intended to be recycled. Nake sure to hold the upper and bottom frames of the unit firmly as illustrated. Install the unit in a horizontal and stable Contact your local authorities packaging. position. For product Do not install the unit in direct sunlight or in a place subject to dust or strong vibration.
iiiiiiiiiiiii@i iiiii@i 3 Get started Supplied Owner's accessories Manual Quick Start guide Registration card Featu res _MpoFI,rAN,r DTV/TV / CATV You can use your remote control to select channels which are broadcast in Digital format and conventional Analog format. Also, cable subscribers can accesstheir cableTV channels. . " " Information display You can display the title, contents (DTV only) and other current program on the TV screen.
Attaching the base Managing cables You must attach the base to the unit to have it as a table top unit Be sure the front and rear of the base match the proper direction. Route your antenna cable and all other cables through the cable management tie at the back oftheTV. For The holder helps keep your cables tidy and easily manageable. large screen TVs, at least 2_ people are required for these steps, t t Attach the cable management tie as illustrated below.
Remote (_ control (b (POWER-ON/STANDBY-ON) Press toTum the unit On and go into Standby mode.To completely Turn Offthe unit, you must unplug the AC power cord. 32"/39" (_ AUTO MODE Cycles through (_ @ preset picture and sound settings. SAP Digital Mode (DTV) : Press to select the Audio language. Analog Mode(TV) (_ : Press to select the Audio mode. 0-9 (NUMBER buttons) Press to select channels. • (DOT) Press to shift the subchannei from the main channel. PREV.
(_ Control panel VOL _/1_ Touch to adjust volume down (4) / up (1_) or to move left (_) / right (_) (_ when selecting menu items. CH A/T Touch to select channels otto selecting menu items. move up (A)/down (Y) when (_) MENU Touch to display the main menu. (_ (_) SOURCE Touch to select the connected (_)(POWER-O N / STAN DBY-O N) Touch (_ toTum the unit On and go into Standby mode. To completelyTurn cord. (_) devices.
Connecting Connecting a set-top box, Blu-ray disc/DVD via composite connectors and AnalogAudio the antenna or the cable Be sure your antenna or other device is connected plugging in the AC power cord. properly before Do not place recorders can your recorder too be susceptible to dose to the screen recorder because some signals.
4 Use A T to select the desired location setting, then press OK. Home is ENERGY STAR® qualified setting. Initial setup This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels. Before you begin: Nake sure the unit is connected to antenna or cable. t After making all the necessary connections, press _ to Turn On the unit.
4 Use yourTV Switching on yourTV mode Switching channels and putting it in standby Y CH A ¢ ToTurn Power _On or toTurn . ° Standby On Touch or press _ on the front panel or the remote control. Energy consumption contributes to air and water pollution,When the AC power cord is plugged in, yourTV consumes energy, YourTV has very low standby power consumption.
Watching channels from an external device Sleep timer Switching Each Input Mode can easily switch with the remote control SleepTimer incremental between TV (DTV orAnaiogTV) connected to the unit. 1 Turn On a set-top box orthe and external devices when they are connected device. , The picture from your set-top box orthe might appear automatically can set the unit to go into Standby mode after an period of time. connected device on the TV screen.
iiiiii@i!i iiii@i For 16:9 video signal fun-Link options (Available for 32/39 inch TVs) If you have our brand products such as BIu-ray disc player or DVD recorder that are compatible with fun-Link functions, connect them to this unit via an HDNI cable so you can simply operate from this unit's remote control. various items Normal ...... 4:3 _1- Movie expand Before you begin: You must set On in Device control and fun-Link control. ,_ p.
TV screen information You can display the currently selected channel or other information such as the aspect ratio on theTV screen. In the Digital mode, the detailed broadcasting information for the current offthe air channel such as program title and program guides are displayed, 1 Press INFO. q} @ ® ® o® (2_) program title (_ program guide (The program guide added to broadcasting information displayed to a maximum of 4 lines.
5 Use more of your TV This section describesthe overview of the main menu displayed when you press MENU, The main menu consistsof the function setting items below. Displaying the main menu 1 Press MENU to display the main menu. 2 Use A V to select the desired menu and an item, then press OK or use A V _ _- to determine the setting. H,_p.18 Adjusting the picture mode or customize the picture quality as your preference. ll,I_ p. 19 Adjusting the sound mode, equalizer and some other sound functions.
*You can set a particular abom:picture qud£y in Advanced settings. Before you begin: You must set Home in Location. ,,,,Jp.26 Otherwise, personalized memorized after the unit goes into Standby mode. 1 picture and sound settings will not be Press MENU and use A T to select Picture then press OK. Color temperature mode Red gain 2 Use A Y 4111_to select the item you want to adjust, then press OK.
Before you begin: Nake sure the unit is connected to antenna or cable. Before you begin: You must set Home in Location. ,,,J p.26 Otherwise, personalized memorized after the unit goes into Standby mode. 1 _- picture and sound se_ings will not be I Press MENU and use A Y to select Setup, then press OK. _- Adjust the following items. Press MENU and use A T to select Sound, then press OK. Use A Y 411_ to select the item you want to adjust, then press OK.
• When the scanning and memorizing are completed, the lowest memorized channel will be displayed. Add channels This function lets you add the offthe air AnalogTV channels that were not added by the autoprogram conditions orAnalog Cable due to reception during the initial setting. 1 Use A Y to select Add channels,then 2 Use the NUMBER buttons to enter the number of the channel you press OK. want to add, then press OK.
Off CC-1 I Press MENU and use • Y to select Features, then press OK. and 7-1 CC-3 and T-3 Caption service Select if you do not want caption service. The primary ,There are 3 display modes programs: Paint-on Adjust the following services.The according Displays Input characters TV screen immediately Once characters Pop-on Roll-up _- and text Rarely available and broadcasters use them only in special conditions, such as when CC-1 and CC-3 or %1 and %3 are not available.
Digital caption description. Caption • service that you can switch diffi_rs depending style will not effect if the User- setting Closed Captioning service may not is set to Oft be controlled w£ching television through an external you will need to use the menu options on the Broadcast by this unit's menu options if you are cable or- satellite set top box, In which on the external set top box to control case Closed Captioning.
Setting US movie and TV ratings US movie ratings lock is the rating system created by NPAA. USTV ratings lock has controlled access to individuaE programs based }_9set the sub ratings As for TV-Y7, TV-PG, TV-14 orTV-MA, you can further set the sub ratings to block specific elements of programming.To set the sub ratings, follow the step below. on their age ratings and content rating.
Canadian English or Canadian French ratings PC settings You can select the rating for Canadian English or Canadian French broadcasting. 3 This function lets you adjust the PC screen position, clock and phase during PC Input. Use A V to select Canadian English rating or Use _ _ to adjust Clock setting to stabilize the PC screen and Phase setting to improve the clarity of the PC screen. Canadian French rating, then press OK.
Device list fun-Link (HDMI CEC) This function allows you to operate the linked functions between our brand devices with a fun-Link feature and this unit connecting through an HDll cable.You must connect this unit to our brand fun-Link devices and be sure its fun-Link (HDMI CEC) setting is also setto 1 Use A T to select fun-Link (HDMI 2 inchTVs. It may differ be grayed fun-Link control out when you On or Off, The following additional settings will set to Off.
Setting your location to home You can set the location of yourTV to Home or Retail. Choosing Home givesyou futI flexibility to change predefined settings for picture and sound. 1 Use • Y to select Location,then Press MENU and use A V to select Language, then press OK. press OK. 2 2 Use A Y to select Home or Retail, then press OK. The unit will be set up with predefined settings for retail displays.
Picture (JPEG) 1 Yourl_J is fitted with a USB connection Use A IF to select the desired file, then press OK. that enables you to view photos or watch Notion JPEG files stored on a USB Nemor 7 Stick, 1 Connect the USB Memory Stick to the USB terminal on the side of yourTV. _- Press MENU and use A IF to select USB, then press OK. . The highlighted text wilI move to the name of your USB Memory Stick, then press OK again. . To toggle between List and Thumbnails the NUMBER 2 button each time. press .
6 Upgrade yourTV software Warning Magnavox continuously tries to improve its products and we strongly recommend that you upgrade theTV software when upgrades are available. New software can be downloaded from our website at • When • Do not the software • If an error occurs duri% the upgrade, please contact Call Center: remove upgrade is runnir_g, don't the USB Memory press any buttons. Stick during retry the software the procedure upgrade.
7 Connecting devices Connecting your devices HDMI Digital connection HDHI HDHI Be[_re you connectAC power cord: connection offers the highest picture quality, (High-Definition Multimedia Interface) transports Digital video and multi-channel Be sure other devices are connected properly power cord. high definition Digital Audio through a single cable.
Component AnalogVideo Digital Audio Connection Component AnalogVideo connection video devices connected to the unit. offersbetter picture quality for If you connect to the unit's ComponentVideo (Y/Pb/Pr) Input jacks, connect Analog Audio cables to the Analog Audio (L/R) Input jacks. Output Connection If you connect this unit to an external Digital Audio device, you can enjoy multi-channel audio like 5.I ch Digital broadcasting sound. Use a Digital Audio Audio devices.
The following video signals can be displayed: PC connection HDiVll connection VGA 640 x SVGA 800 x 600 XGA 1,024 x 768 1,280 x 768 1,360 x 768 1,920 x 1,080 This unit can be connected to your PC that has a HDMI terminal. Use an HDMI cable for this Digital connection.
8 Useful tips FAQ Ply remote work. What control does not • Check the antenna • Checkthe should I do._ • Check batteries if there or cable connection of the remote is an obstacle to the main unit. control. between the infrared sensor window and the remote control. • Test the signal Output use IR Signal Check. u,j p.34 If okay. then possible infrared sensor trouble. • Aim the remote control directly at the infrared • Reduce the distance to the unit.
Power is ON but no screen • Check whether the connection of the antenna, cable receiver or satellite box is connected correcLJ)_ image. • Check whether ail the cablesto the unit are connected to the correct Output jack of your device like BJuray disc/DVD recorder: • Hake sure that the selected input mode is connected to the working input jack. • Check if your computer" is NOT in sleep mode when the input mode of this unit is in PC mode.
9 Information Maintenance Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee of Analog broadcasting standards. Off the air AnalogTV stations in the USA. Aspect and the name signals are no longer being sent By major broadcasting . Wipe the front panel and other exterior a soft cloth. * Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
iiiii@ii!i!! iiiiii,@ 10 Specifications T FH D Type Aspect / WXGA (1920 x 1080 pixels 60Hz) / (1366 x 768 pixels 60Hz) 16;9 ratio 178 ° (V) by178 ° (H) Viewing angles 170 ° (V) by170 ° (H) 160 ° (V) by 170 ° (H) ATSC / NTSC Built-in Digital tuner hJono / Stereo Power Output 150 ° (V) by160 ° (H) Mono, Stereo, SRSTruSurround (RP1Swatts) 10W xl XT e 8W x l 2W x l 5 band Equalizer Picture format SD (4:3 Source) HD (t6:9 Source) : Normal/16;9 / Movie expand / Zoom/Wide : Normal / 4:3
11 Warranty WARRANTY COVERAGE: This warranty below. obligation or a part that has been modified is limited to the terms as set forth WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase ("Warranty Period") from an Authorized Dealer.
FUNAI CORPORATION, 19900Van Ness Avenue,Torrance, Inc.
