Owner`s manual

Connecting the antenna or the cable
Be sure your antenna or other device is connected properly before
plugging in the AC power cord.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection.
"it _ 75_.
anteooa
ble
If you connect a set-top box through RF cable
IftheTV is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3, 4 or the channel specified
by the service provider,
i !i,
RF cable J
IN
OUT / \
I I
set-top box
If you connect a set-top box through HDMI
IftheTV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct Source by using SOURCE.
OUT
RF cableiN!
set-top box
If you connect a set-top box through ComponentVideo Input
IftheTV is connected to a cable box or satellite set-top box via
ComponentV[deo Input, make sure you select the correct Component
Video Source by using SOURCE.
Connecting a set-top box, Blu-ray disc/DVD recorder
via composite connectors and AnalogAudio
Do not place your recorder too dose to the screen because some
recorders can be susceptible to signals.
Blu-ray disc/DVD recorder
• IfyouhaveanyquestionabouttheDTV'santenna, v[sitwww.antennaweb.or£forfurther
information.
• Depending on your antenna system, you may need different types of combh-_ers
(mixers) or separators (splitters) for [qDTV signal.The minimum RF bandpass on these
devices is Z000HHz or 2GHz,
• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit,
• If you did use an antenna to receive AnalogTV, it should also work for DTV reception.
Outdoor or attic antennas will be more effective tharl a set top box or inside antenna,
• To I_drn On your reception source easily between antenna and cable, install an antenna
selector
• If you are not receiving a signal from your cable service, contact the Cable provider:
• Only the left loudspeaker reproduces sound for- mono equipment, Use a mono to
stereo adapter- (not supplied) for sound reproduction via all internal loudspeakers.
Plugging in the AC power cord
Hake sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
H Caution
" Do riot corlnect the AC power- cord to a power- supply outside the indicated voltage of
this url[t (AC 120V),
" Connecting the AC power cord to a power supply outside of this range may result in
fire or electrical shocks,
Each time you plug in the AC power cord, no opera±ions will be performed for a few
seconds.This is not a malfunction.
RF cableiN !
/ \
set-top box