Owner`s manual

4 Use yourTV
Switching channels
Switching on yourTV and putting it in standby
mode
¢
Y CH A
ToTurn Power _On or toTurn Standby On
. Touch or press _ on the front panel or the remote control.
° Energy consumption contributes to air and water pollution,When the AC power
cord is plugged in, yourTV consumes energy, YourTV has very low standby power
consumption.
Adjusting volume
VOL
° The above image is an example for 32 inch and larger screen sizeTVs,
It may differ depending on what product you purchased,
% select Channels by using CH A!_ or CH +/-
. Touch CH A (up)/Y (down) on the front panel or press CH +/-
on the remote control.
% select Channels by using the NUNBER buttons
i
. For Digital channels, press a number followed by a dot "." and the
corresponding sub channel number,
- When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number,
° The above image is an example for 32 inch and larger screen sizeTVs.
It may differ depending on what product you purchased,
% increase or decrease volume
° TouchVOL 4(down)/_ (up) on the front panel or press
VOL +/- on the remote control.
To mute or unmute sound
° Pressn_ on the remote control to mute the sound.
. PressaS againor VOL +/- to recover the original sound.
- When selecting cable orAnalog channel 11
Press PREV.CH to return to the previously viewed channel.
° To select the non memorized channels, use the NUMBER buttons.
° No Signal will appear on theTV screen after- the subchannel broadcast is oven
° Audio only program message will appear on the TV screen, when you receive only
sound signal.