Owner`s manual

Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3 Use A V to select Canadian English rating or
Canadian French rating, then press OK.
4 Use A Y to select the desired rating, then press OK repeatedly to
switch between view and blod<.
• [] indicates that the rating is Iod<ed.
• [] indicates that the rating is not Iod<ed.
PC settings
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use _ _ to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1 Use A T to select PC settings, then press OK.
All Locked all ratings
E E×empt program
C - For all children
C8+ - For children over 8
G General audience
- 8ans+ Unsuitable for" ages under" 8
PG - Parental guidance suggested
- 13ans+ Unsuitable for" ages under" 13
14+ - Unsuitable for" ages under" 14
- 1Bans+ Unsuitable for" ages under" 16
18+ 18ans+ Adult audience only
• TheVChip can block non rated programs as per'CEA 608 E sec, L,3", If the option to
block NR, None or E programs is used in US movie ratings loci<, USTV ratings lock,
Canadian English rating or Canadian French rating accordingly "unusual results
ma 7 occur and the unit may not receive emergency bulletins or- other types of
programming:"/Emergent 7 Bulletins (Such as EAS messages, wea±her warnings
and others) / Locall 7 originated programrning / News / Political / Public Service
Announcements / Religious / Sports / Weather
Change PIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
3 Use A T to select Change PIN, then press OK.
4 Press the NUMBER buttons to enter the new 4-digit PIN code.
• Enter PIN code again in Confirm PIN. entry field.
2 Use A Y to select the item you want to adjust, then press OK.
• The horizontal/vertical position, dock and phase of the PC
screen are automatically adjusted.
Auto adjustment Select if you want to adjust automatically.
Horizontal position to move PC screenleft to move PC screen right
Vertical position to move PC screendown to move PC screen up
Clock
to decrease setting value to increase setting value
Phase
• You may not obtain an approprbte screen with Auto adjustment for sorne signals, h7
this case, adjust the settings manually.
• Adjust Phase setting after- Clock setting has been properly adjusted,
• Hake sure new PiN code and conlgrm PIN code must be exactly the same. If they are
different, the space is cleared for reentering,
• Your PIN code vdll be erased and returns to the default PIN code (0000) when a
power- failure occurs.
• If you forget the PIN code, unplug the AC power cord then wait for 10 seconds to plug
theAC power- cord in again,
The unit will restore the PiN code to 0000 as the factory default.