Owner`s manual

7 Connecting devices
Be[_re you connectAC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition Digital signals and gives highest picture and
sound quafity`Video and audio signals are combined in one cable.
You must use HDHI for full high-definition video and to enable
fun-Link (HDHI CEC).
* Nagnavox HDHI supports HDCP (High bandwidth Digital Contents Protection).
HDCP is a form of Digital Rights Management that protects high definition content in
Blu ray discs or DVDs.
Component (Y Pb Pr) - High quality
Supports high-definition Analog signals but gives lower picture quality than
HDHI. Component (Y/Pb/Pr)Video cables combine red/green/blue
video cables with red/white audio (L/R) cables. Match the cable colors
when you connect to theT_.
Composite - Basic quality
Connecting your devices
HDMI Digital connection
HDHI connection offers the highest picture quality,
HDHI (High-Definition Multimedia Interface) transports high definition
Digital video and multi-channel Digital Audio through a single cable.
OUT
set-top box
or
Blu-raydisc player
or
liD game console
HDMI-DVI connection
This unit can be connected to your device that has a DVI terminal.
Use an HDHI-DVI conversion cable for this connection and it requires
audio cable for Analog Audio signal as well.
cable receiver or
satellite box with the
DVl Output jack
OUT
conve;'i:on c£be
_udio (k/R) cables
• Use an HDNI cable with the HDNI Io£o (a certified HDMI cable). High Speed HDNI
cable is recommended for-the better compa±ibilKy.
, For HDNI connection
• The unit accepts 480i / 48% / 72% / 108G, 108% 24/30/60Hz of video signals, 32k] Iz
/ 44.1kHz and 48kHz of audio signals,
• This unit accepts 5,1 channel audio signal (Dolb 7 Digital) and 2 channel audio signal
(LPCH),
• This unit accepts only si{:nals in compliance with EIA861,
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals,
• HDMI D\/I connection requires separa±e audio connections as well and the audio
signals are output as Analog (L/R) Audio.
• DVI does not displa 7 480i image which is not in compliance with EIA/CEA 861/861B.
For analog connections. CompositeVideo/Audio Analog cable usually
combine a yellow video cable with red/white audio (UR) cables,With
this unit, yellow cable must be connected toY (green) of Component
Video Input jacks.