Owner`s manual

8 Useful tips
FAQ
Ply remote control does not • Check the antenna or cable connection to the main unit.
work. • Checkthe batteries of the remote control.
What should I do._
• Check if there is an obstacle between the infrared sensor window and the remote control.
• Test the signal Output use IR Signal Check. u,j p.34
If okay. then possible infrared sensor trouble.
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re insert the batteries vdth their" polarities (+/) as indicated.
• When there is an infrared equipped device such as PC near" this unit. it may interrupt the remote control signal of this unit. Move
the infrared equipped device away from this unit. change the angle of the infrared sensor" orTurn Off the infrared communication
function.
Why can I not watch some RF • Autoprogram must be completed when you set up the unit for'the first time or" move it to a location where previously unavailable
signal TV programs, channels are broadcast.
• Make sure Autoprogram has been completed, u,j p.19
• The selected channel may not be broadcasting.
• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
Autoprogram. u,j p.19
• The selected channel cannot be viewed by the Child and ratings loci( setting, u,_ p.22
• The unit requires some kind of antenna Input.An indoor" antenna (Digital orVHF/UHF), an external antenna (Digital orVHF/UHF)
or" an RF coaxial cable from your" wall cable/satellite box needs to be plugged into the unit.
When I enter a channel number, • Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones signifying the
it changes automatically, broadcasting station channel number:These basic numbers used for" previous Analog broadcasts. (e.g.. Input ch# 30 automatically
changes to ch# 6.1)
I
Why are captions not disp ayed . Capt ons that are de ayed a few seconds beh nd the actua d a og are common for ve broadcasts. Most capt on ng product o_
endrely._ Oh captions are I companies can display a dialog to maximum of 220 wgrds per minute. If a dialog exceeds that _ate, sele_jv e editing is used to
delayed behind the dialog, insure that the captions remain up4o date with the currentTV screen dialog.
How can I set the clock ._ • There is no clock function on this unit.
I
®
t cannot change the Child lock If a Power failure occurs for longer than I 0 seconds the child 10cl<setting is retained, but the PIN code is reset to the default code
setting because my P!N code no 0000. Refer to Child and ratings loci(. ,!Jl, p.22
longer works, I
Troubleshooting
If the unit does not perform properly when operated as instructed in this Owner's Manual,
check the following chart and all connections once before calling for service.
No power • Plake sure the AC power cord is plugged in.
• Plake sure that the AC outlet supplies the proper" voltage, plug another" electrical appliance into the AC outlet to ensure that the AC
outlet operates nor'mall}4
• If a power failure occurs, unplug the AC power cord for" I minute to allow the unit to reset itsel_{
Control buttons do not work. • Press only one button at a time. Do NOT press more than one button at the same time.
• Ensure that no buttons on the remote control are depressed and move fr'eel}4
Continued on next page.