User manual

menu-lnsta,adon
;et{i }0
lnstallat{on kangusoe
eltiF_ / /!A I /[
Aut0pr0gram Antenna
Select the menu language
O Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
0 Use the cursor right to enter the Installation menu.
0 Select Language and enter the list of available languages with the
cursor right.
Select your preferred language with the cursor up/down and press
the OK button to confirm your selection.
0 Proceed with the Installation menu.
Store TV channels
Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
O Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and ATSC) channels
available in your local area.
When Cable is selected, the TV will detect cable company
supplied signals and will search for cable TV (NTSC, ATSC, QAH
modulated) channels available in your area.
Make sure that registration with your cable TV provider and
connection of equipment are completed.
Select Start now with the cursor right key.
0 Press the OK button.
0 Press the green button "Start" to start Autoprogramming. The
menu screen disappears and the progress of Autoprogramming
is displayed. The progress bar indicates the number of analog and
digital TV channels found.
Auto programming may take up to 20 minutes to complete. Digital
channels will take longer than Analog to find and program. Please
wait until you see the Auto Programming complete message. The
TV will then switch automatically to the first channel found.
Note: All channels must be unlocked in order to autoprograrn. If
requested, enter your PIN code to unlock all channels. (p. 28)
Note _:
o When you have locked TV channels bef'ore _n_t_atmgAutoprograrn, a messago a_pears asking _:oenter your PIN code in
order o c0mp_ete #,utoprograrnming
o When channe_update is intemup_:eo the new uodated channel information _sretumeo along _'_tt_the old un.updated
channel infom _at_on
o Channel in_rmation about an ATSC channel is updated only [or the ATSC channel curren ly _uned
o If an NTSC channe_ts _uned,then in background Autoprogrammmg the TV _ _ scan all me possible ATSCf?equenc_es
and uoaa_e mlorrnd non
o VCeak char nd installatkm allows you to m_n laHy tune weak ATSC cnameLs in order to uelust tt_e am:enn_ and thus
optimize signo! quality lot that channel (See lns_allatlon menu Weak channel _nstallat_on.p. 14)
o Once you nave searched _orthe available Antenna as we_ as the Cable TV channels, the}, ore stored m me memur,
o IfAntenna!cable signal Lsinterrup_ea more than 30 minutes_ TV wil! go into off:mode. Youare requested to press Power button
or C H + f - button _oturn on the TV
13