User manual

_PC menU:!nStal!at!oni }
]nstallaUon Language,'
f_ t!i g
h_stallat[Qn So_lrce
zzzz zzzzzzzzzzzzzz
Select the menu language
Note: Press SOURCE button on the remote controK to rna£e sure the source is
selected in PC mode.
0 Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
0 Use the cursor right to enter the installation menu.
0 Select Language and enter the list of available languages with the
cursor right.
0 Select your preferred language with the cursor up/down and press
the OK button to confirm your selection.
0 Proceed with the installation menu.
Source
Select Source in the Installation menu.
Use the cursor right to enter the Source menu.
0 Select PC with the cursor up/down and press the OK button to
confirm your selection.
5{, i _{IS
Installation Picture adj{_strnsnt
#/fo
S(!tP/ig',
Installation F_ct0ry reset
reset
Picture adjustment
Select Picture adjustment in the Installation menu.
Use the cursor right to enter the Picture adjustment menu.
0 You can choose Auto adjust or Manual adjust with cursor up/
down and press OK button to confirm.
Auto adjust
Automatically adjust to the best image position, phase and
clock setting.
Hanual adjust
Manually fine tune the image as it appears on the screen.
• Phase
Eliminates the horizontal interfering lines.
• Clock
Eliminates the vertical interfering lines.
• Horizontal
Adjust the horizontal placement of the picture.
• Vertical
Adjust the vertical placement of the picture.
Factory reset
This function allows you to reset most of the picture and sound
settings to their default factory levels.
Select Factory reset in the Installation menu.
Use the cursor right to enter the Factory reset menu.
O Press the OK button to erase settings and reset them to their
default values.
38