Directions for Use 3121 235 21122
Once your PHILIPS purchase is registered, of owning a PHILIPS product you're eligible to receive all the privileges So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important PHILIPS Congratulations on your purchase, and welcome to the "family!" Dear PHILIPS product benefits. owner: Thank you for your confidence in PHILIPS. You've selected one of the best-built, best-backed [ available today.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. 4. Heed all warnings. Follow all instructions. B. C. D. 5. Do not use this apparatus 6. Clean 7. Do not block any of the ventilation with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat regislets, stoves, or other apparatus (including amplifiers) that produce heat. 9.
SAFETYINSTRUCTIONS - Readbeforeoperatingequipment encouraged to try to correct the interference by one or more of the following measures: i) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and the receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help.
Introduction Welcome/Registration of Your TV ...................... Safety Instructions ................................ Table of Contents ................................... Features _ 2 3-4 5 .......................................... Disc Types and Disc Cleaning ......................... ODeratin_ DVD Remote Control 6 Setup Menu 6 Language Install Menu How to use the Language Control ................ How to use the Tuner Mode Control ....................
Active Control TM continuously measures and corrects all incoming signals to help provide the best picture quality. This feature monitors and corrects both the sharpness control and noise reduction control. Audio/Video Jack Panel allows direct connections with accessory devices, providing quality TV piclure and sound playback. Audio Volume Leveler (AVL) Control keeps the TV sound at an even level.
F_Ir creen our Spanish speaking TVisowners anWith onLANGUAGE option present.,, the LANGUAGE control you can set the T_s on-screen menu to be stu_wn in either English or Spanish. I 2 o S_ Color o Fea&ir'e_ Pie'&re Press the MENU buttott on the reirto_ to show the on-screen ltleltu. More... [ Press the CURSOR ,, UP or DOWN buttons to scroll fltmugh the olt-screee menu tutti] the word INSTALL is hJg[flighted. Press the the CURSOR RIGHT tc_display INSTALL meeu button features.
Tche TUNER MODE control allows you to hange the 77,,s signal input to either ANTENNA, CABLE or AUTO mode. It's important fbr the 77I to know what type Of signal to look fbr. (From a Cable TV signal or a narmal Antenna signal,) In the AUTO nu_de, when the Affl'O PROGRAM feature is" activated, the TV will automatically choose the correct mode. I 2 _ _*m T_r_ MOI_... Press the MENU buttott on the remo_ to show the on-screen ltleltu.
Four TV can automaticall), set itself lbr J[ local area (or Cable I-1,) channels. This makes it eas3' lbr you to select only the TV stations in your area when the CHANNEL (+), (-) buttons are pressed. Note: Make sure the antenna or cable signal connection has been completed bejbre AUTO PROGRAM is activated. I 2 _ra _as_ ] S o F_r&lre_ Plo_re o Irls_ll Shallsrtes_ Tin1: o ISr_l_ o _r_d L_flt_ il_r MOIS... o F_a_ara_ &_) A Press the MENU button on the remote, to show the on-screen ltleltu.
Channel Edit makes it easy fi_r you to ADD or DELETE channels fiz_m the list of channels stored in the TV's menu_ty. I 2 Press the MENU button on the relno_ to s_rlow the on-screen TtleltU. Press the CURSOR Ilrl UP or DOWN buttons to sc_fll fltrough the on-screen menu until the word INSTALI, is higtflighted. Press the CURSOR RIGHT to display the INSTALL menu button feat_wes.
To adjust your T_"p_ctum controls, select a I channel and/bllow the steps shown below: I 2 Press the MENU button on fire remote k_ display the on-scaeen menu. Press the CURSOR UP or DOWN buttons tutfil rite word PICTURE is highlighted. o _Dr_ N¢TJre [ Press the CURSOR RIGHT button t_) display the PICTURE menu fe,amres. Press CURSOR UP or DOWN buttons _.__l] the Pic_tre features and high]ight fire conrail yott wish to ad'yast (Bright_tess, O._]€._r,Pic_ttre, Sharpness, Tint, Color Temp.
Besides the noratal vohane level control, your TV also has Treble, Bass, Balance, AVL (automatic volume leveler), Incr. Surround, Ultra Bass, and Sound (Stemo/Mono) controls. I 2 3 4 Press the MENU bl_tton on die remote to display fl_e on-screen melm. S Press LEFT the button CURSOR to turnRIGHT fire adjustor or turn the control On or Oft'. o _nd GO._r o In_Lcdl Sl_r_-c_s tint I=dor_... Press the CURSOR UP or CURSOR DOWN buthm tmtil the word SOUND is _figldighted.
_TIe Timer controls allow you to _'e your as an alarm clock if set to turn itself on and off at a specific time. It also can be set to tune to a specific channel at a spee![ic time. %;;;;;;;;: o Poa_rc_s I#_:u'€ o [nSINI _ll_r0€l_ Press the remote to display MENU file button on-screen on themenu. Iird [ until fire Press theword CURSOR FEATURES DOWN isbutton highlighted. displaythe Press fireCURSOR FEATURES RIGHT menu button options.R_ TINIER will be highlighted.
M;nY times while watching movies VD player the image is shown "letter box" fi)rmat. This is theJbrmat shown in movie theaters. When shown fi'om a in that is on a TV screen, the image will have areas of black on top and bottom of the screen. The FORMAT Control can help to display the image as close as possible to its original aspect ratio. o_ Co_r o Features Picture o Install Sharpness Tint IMain Mote...
Tehe AutoLock _r_lleature is an integratd circuit that receives and processes data sent by broadcasters, or other program providers, that contain program content advisories. When programmed _v the viewer, a TV with AutoLock _r'lcan respond to the content aAvisories and block program content that may be fimnd objectionable (such as"offensive language, violence, sexual situations, eto.), This is a great leature to censor the type of viewing children may watch.
Over the next lew pages you'll lea_ff how to block channels and get a bet¢er understanding O# the rating terms lbr certain progra_ing, First, let's" start by learning sonal access code: o _oun_ how to set a per_a.. i I 2 - i Press the MENU bl=tton on die remote R_display fire on-screen melm. Press the CURSOR UPor DOWN button tutti] the word FEATURES is hig_dighted, Press the CURSOR RIGHT button k_ display the FEATURES menu optkms.
After your personal access code has been set (see previous page), you am now ready to select the channels you want to block out or censor; I 2 3 Press (or you CH wish +, -) buttonsthemNUMBERED ttme the charme] to b]ock or censor. Press the MENU button on the l_eTllOt_ tO show _he Oll=S_Teell Tllenl_[. Press file CURSOR UP or DOWN button until rite word FEATURES is highlighted. Press the CURSOR RIGHT button m display fire FEATURES menu options.
After blocking speci[ic channels there may come a time when you want to clear all the channels so they can be viewed. The fi_llowing steps explain how to CLEAR ALL blocked channels. Pk_ o _ Yr_ I 2 Press the MENU button on file relno_ to _how the on-screen TtleltU. 3 Press the CURSOR RIGHT button to display the FEATURES menu options. 4 Press the CURSOR UP or DOWN button until the words AutoImck are higtflighted. w Press the CURSOR UP or DOWN button until the word FEATURES is higtflighted.
ThBere may come a time when you want to lock All the television's channels. Maybe you don2 want your children to watch TV lbr a given time. With the BlockAll control, ALL available channeh" (including the AiV Inputs) can be set to block at the same time. I 2 Tr_ Pr_ess the MENU button on the remo_ to show file orl-screell merlu. [*tess the CURSOR UPor DOWN button until the word FEATURES is highlighted. 3 4 [*tess the CURSOR RIGHT button to display the FEATURES menu optkms.
Twhem are two types of program ratings ithin the AutoLock _r_lfeature. One is based on the Movie Industry ratings while the other is based on the TVIndustry ratings. Both can be used to block or eensor progr_ng that has been rated in either manner, Le(s first look at the Movie Rating options AutoLock r:a : I 2 3 4 5 Press file MENU i_n A r-_1188 [ pi_ar_ _nt of button on the r_ote to display fl_e on-sc_men menu.
Zhis portion of the AutoLock r:afeatures rover program ratings based on the 77, Industry rating system. This"is known as TV Rating within AutoLoefi r:a. After selecting the Autolock _r'lleature and entering your personal access code, the AutoLock _r'_options screen appears; I Scroll UP or DOWN the menubuttons using the tmtilCURSOR the words TV RATING _ce highlighted. 2 Press the CURSOR RIGHT button to display file TV Ratings (TV-¥; TV-Y7, TV-G, TV-PG, TV-14, or TV-MA).
A utoLock TM offers the viewer other blocking fbatures as well. With these Blocking Options, the censoring can be turned ON o1" OFE o 9,ouzel Corot o D,_atums Pietum Press the MENU button on the remote to show the on-screen menu. T_t Mor_ Press the CURSOR UP or DOWN button until the word FEATURES is highlighted. E ] Press the CURSOR RIGHTmenu button to display the FEATURES options. Press the CURSOR UP or DOWN button until the words AutoLock are highlighted. 5 Press the CURSOR RIGHT button.
Tine Active Control monitors and adjusts coming video signals to help provide the best picture quality. When you choose to turn the Active Control ON, the Brighmess, Picture, Sharpness, Contrast + and DNR (dynamic noise reduction) Jkatures are controlled automatically. Active Control adjusts these picture settings continuously and automatically. Main ,zPicture A • oSound I Mail1 More...
O_ve you ever fallen asleep in front of the V only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off Press the remote control SLEEP and button the SLEEP on thetimer display will appear on the screen. Press the theamount SLEEPof button repeatedly pick time (15, 30, 45, to 60, 90, 120, 180 or 240 minutes) before the TV will turn itself off.
Closed Captioning (CC) allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress. Press the CC button on the remote to display the current Closed setting.
W_pether you' re watching a movie or a orting event, your TV has automatic" video control settings matched for your current program source or content. The SmartPicture TM feature quickly resets your TV's video controls for a number of different types of programs and viewing conditions you may have in your home. Each SmartPicture TM setting is preset at the /actory to automatically adjust the TV's Brightness, Cohn; Picture, Shalpness, Tint, Color Temperature, DNR and Contrast+ levels.
Tthe SmartSound TM feature allows the lisener to select between four diff_rent /bctory set sound options. Personal (which can be set by the user), Theatre (for movie viewing), Music (/'or musical type programming) and Voice (when the program is mainly dialogue). 771ese setting affect the Sound menu's Bass, Treble, AVL, and Incredible Surround controls _ select any of the options/bllow tions below.
A "list" o1"series of previously viewed channels can be selected with the QuadraSurf TM (colored) buttons on your remote control. With this feature you can easily switch between different TV programs that currently interest you. The QuadraSuff TM control allows you set up four different personal Smf lists using the colored buttons (on the remote control), each homing up to ten channels in its quick viewing "list.
Tle QuadraSurf rM buttons on your remote ontrol allow you to store up to 10 channels per button (40 total). This is a great/k,ature if you want to store all your favorite Sports channels, Movie channels, or News channels in one surf list. Family members can have there own fi_vorite list of channels. You can even program the external A/V Input jacks (Front channel)for one of the buttons making it a "source" button fi)r your external accessory devices.
This section of the Directions for Use manual begins to explain the operating procedures of the DVD Player portion of this television. Let's learn the simple operation built-in DVD Playel: of the TV's Unless otherwise stated, all operations can be pelformed by using the remote control. The default Video "blue" screen (DVD background) will appear when the TV in the DVD operational mode. Press POWER the the remote the control (or thebutton TV) toonturn television ON.
T)pv/e remote control supplied with your DVD product has specific buttons for the operation of the DVD Playel: This page is a brief overview of those buttons. -EJECT button -With the TVon, press to place the unit in the DVDoperationalmode and open the disc tray. Press again to close the disc lray. POWER button - Press to power the -TV/DVD on or off. REPEAT button - Press once to repeat the playback of the current chapter. Press a second time to repeat the current title.
When the "X" icon appears on the TV screen, it means the function cannot be ThpiS manual gives the basic" instructions for erating this DVD Playel: Some DVD (discs) require specific operation or alh)w only limited operation during playback. In these cases, the player may not respond to all operating commands. When this occurs, please refer to the instructions contained with the DVD (disc). When the _vmbol appears on the TV screen, the operation is not permitted by the player or the disc.
ypU can select diff,,rent languages so the DVD layer will automatically display its Onscreen Menu and DVD Disc Menus in the language you of your choice. The DcJault Audio and Sub-title can also be changed to a desired language. To change the Default Audio Language or Default Sub-title Language, fbllow the steps below. ittl_l Stop playback if SYSTEM a disc is playing player. Press the MENUin the (OSD) button on the remote control to display the on-screen menu.
Tioe DVD Player included in mpatible with NTSC and DVD Player to playback a dist' color system of the CD, the TV Player should match. this television is PAL. For the correctly, the and the DVD Stop playback disc is playing in the player. Pressif athe SYSTEM MENU (OSD) button on the remote control to display the on-screen menu. i_l.
If an external audio _vstem is being used with our DVD Playel; the Digital Output control may need to be set to match the output of the _vstem. Stop playback disc is playing in the player. Pressif athe SYSTEM MENU (OSD) button on the remote control to display the on-screen menu. Press the CURSOR DOWN button until the word Setup is highlighted. Press move the puck CURSOR to the RIGHT right highlighting button to the words Audio Menu. Press the the CURSOR DOWN control.
Some Video CDs contain #_brmation that allow you to control the playback of the disc" through a special playback menu. the PBC (Play Back Control) can be set to On o1" off: Press the button on SYSTEM the remote MENU control (OSD) to display the on-screen menu. 2 3 Press the CURSOR DOWN button until the word Setup is highlighted, Press the CURSOR RIGHT button to move the puck to the right highlighting the word Features.
When using and making changes within the Access Control options an access PIN will have to entered before any new settings can be made. Other controls include Parental Level, Change PIN, and Disc Lock. button the Press on SYSTEM the remote MENU control (OSD) to display the on-screen menu. p o qo Press the CURSOR DOWN button until the word Setup is highlighted, O@O move the Press the puck CURSOR to the RIGHT right highlighting button to the word Access, Press the CURSOR highlight trol.
TM e Sound option within the Preference enu contains a control called Night Mode. the Night Mode control when On will optimize the dynamics of the Players sound output. High Volume sound are softened, enabling you to watch your _hvorite action movies without disturbing others at night. When the Night Mode control is set to Off, the sound output will be heard in its Jbll dynamic range. n_m_l Press button the on SYSTEM the remote MENU control (OSD) to display the on-screen menu.
rr_w DVD Player has two special controls I that can be turned on to help navigate the menu with helpful suggestions (Help Line) and the show the current play state and time #formation (Status Window) on the screen during a disc playback. Press the button on SYSTEM the remote MENU control (OSD) to display the on-screen menu.
T_e Play Option area of the DVD Player nscreen menu contains three control that allow you to navigate the disc" by titles and chapters, set the audio language, and set the sub-title language. Press button the on SYSTEM the remote MENU control (OSD) to display the on-screen menu. the Toolbar option will be highlighted. Press thewords CURSOR RIGHT are button until the Play Option highlighted. Press the the CURSOR DOWN button highlight Disc Navigation, Audio,to or Sub-title control.
The DVD Player has the capability to view hoto CDs that contain digital photos (JPEG only) on the TV screen• The Slide Show controls of the Tool Bar menu allows you to control the viewing process. With the TV/DVD in the DVD mode press the EJECT button to open the disc tray. Place a Photo CD (JEPG only) disc tray and pre_ the EJECT to close the disc tray.
Some Discs contain additional information that will allow the viewer to change the camera angles, zoom the picture, rotate the picture, and scan chapters with chapter previe_ Press the button on SYSTEM the remote MENU control (OSD) to display the on-screen menu. the Toolbar option will be highlighted. 2 3 Press the CURSOR RIGHT button until the word View is highlighted, 4 Press Press the CURSOR DOWN button to highlight either the Angle, Zoom, Chapter Preview, or Rotate control.
T_ge Search control allows you to start the layback at any chosen time on the disc o1" to search Jbr certain areas. The search options can be set fast, slow, o1"can be searched f?ame byJi'ame. Press the button on SYSTEM the remoteMENU control (OSD) to display the on-screen menu, the Toolhar option will be highlighted, 2 3 Press the CURSOR RIGHT button until the word Search is highlighted.
mz._m_m_wmmm y;u can program your fhvorite tracks to be layed in the order you want using the Program options within the Toolbal, Up to 20 tracks can be programmed at one time. Press the button on SYSTEM the remote MENU control (OSD) to display the on-screen menu. the Toolbar option will be highlighted. Press the theword CURSOR RIGHT button until Program is highlighted. highlightthe either Press CURSOR the Program, DOWN button Tracks, to Play list, or Clear all control.
electing an Audio Jess one button. To Select the desired Language Audio is as easy as Language: Y 0%0O® Press the red AUDIO button on the remote control to display the on-screen Audio menu. 2 3 Press the • or • button to scroll the available language options. Pre_ the OK button to confirm the selection and remove the menu bar from fl]e TV screen. @®@ ®®® Audio is heard in the selected laganuage.
_th ee Sub-title button will allow you to select desired_ Sub-title language quickly or to turn the Sub-title option off To Select the desired Sub-title Language: Press the blue to Sub-title on the remote control display button the on-screen Sub-title menu. _:,0 O® ©o o 55 '° Press the sub-title • or • language button tooptions scroll the available or the option "none". selection menu barthe Press the and OK remove button the to confirm from the TV screen.
Tie Repeat button on the remote control will llow you to program the playback of Chapters, "I)'acks, Titles, or the entire Disc to be repeated. S;O O® _T_u,_ sM_nT_wgr_ 0@0 remote the Press control green repeatedly REPEAT tobutton choose ononethe of the available repeat modes: Reheat : Press the REPEAT button once, REPEAT will appear on the screen.
Mah The fbllowing steps describe how to ookmark your DVDs when using the Timer Controls within the TVs onscreen menu. I Main o Piclure A o Sound o Features C,obr Picture o Install Sharw_ a, I _mer o Sourd Au_oLock [-,'Fe_r_ * IWmat o _nst ale ,a_ve Cor_o[ T_nt More. [ Note: With an "on timer" sequence set (and active), the Timer Controls can tune the TV to the DVD mode when the TV powers itself on.
Tihe following steps describe how to change e Audio Language control.
No Power • Check 1he TV power cord. Unplug the TV, wait i0 seconds, then reinsert the plug into the outlet and push the POWER button again. • Be sure the fuse is not blown on 1he AC power strip, if one is being used. • Check to be sure 1he TV outlet is not on a wall switch. • Check the TV power cord. Unplug the TV, wait i0 seconds, then reinsert the plug into the outlet and push the POWER button again. • Check that the outlet is not on a wail switch. • Be sure the fuse is not blown being used.
WARNING Screen: Concerning Stationary Images on the TV PLACEMENT • To avoid cabinet Do not leave stationary or letterbox images on screen for extended periods of time. This can cause uneven picture-tube aging. menus--listings images • To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning. • Regularly dust the TV with a dry, nonscratching keep the TV clean. • When cleaning the TV, take care not to scratch screen surface.
Auto Programming • The procedure of adding or deleting channel numbers into the Television's memory circuits. In this way the Television "remembers" only the locally available or desired channel numbers and skips over any unwanted channel numbers. Side Audio/Video Inputs • Located on the side of the TV these connectors (phono type plug) are used for the input of audio and video signals. Designed for easy use with VCRs or cameras. Surf • The action of scanning channel list.
DVD Player Operation Audio CD Playback ................................ Television Operation Active Control ..................................... 49 Basic DVD Operation .............................. Bookmark DVD ................................... 30 48 Menu Bar Operation Preference Menu Features 32 ................................ Help Line ..................................... Status Window .................................. Remote Remote Control Control Audio Button ........................
• . Charlotte .\/ Atlanta/N Georgia * Indicates In-Home Service Only _/_ Milwaukee:call Chicago _ Cincinnatiand Columbus:call Cleveland Nashwlleand Chattar_x_ga:call Knoxville Washington/Ba_imore:call Philadelphia Charlotte:callAtlanta All Floridalocations;call Tampa _\ TampatW Rorlda _lFt M.
OUALITYSERVICE IS AS CLOSEAS YOURTELEPHONE! SIMPLYLOOKOVERTHELISTBELOWFORTHENUMBEROF A FACTORY SERVICECENTER NEARYOU. YOUR PRODUCT WILLRECEIVE EFFICIENT ANDEXPEDIENT CARRY-IN,MAIL-IN,OR IN-HOMESERVICE,ANDYOUWILLRECEIVE PEACEOF MIND, KNOWING YOURPRODUCTIS BEINGGIVENTHEEXPERT ATTENTION OF PHILIPS' FACTORY SERVICE. COMMEHTOBTENIRNOTRESERVICEAPRESVENTERAPIDEETEFFICACESOIT PAR COURRIER,_ DOMICILE,OU EN SE PRESERTART_ UN CENTREDE SERVICEPHILIPS. PLUSDE 600 CENTRES DE RECEPTIONDE PROOUiTS.
COLOR TELEVISION 90 Days Free Labor One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube) This product can be repaired in home, WHO IS COVERED? MAKE You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT KEEP... IS COVERED? BEFORE REQUESTING SERVICE... Pleasecheck your owner's manual before requesting service.
Quick Use and Hookup Guide IMPORTANT Basic Antenna Basic TV Operation .......................... 1 Using the AVI Inputs ........................ 3 Remote Battery Installation 1 Using the AV2 Inputs ........................ 3 1 Using the Component Video Inputs ..................... ................... Remote Control Button Descriptions ............ Hooking Up the TV Basic Cable TV Connections .................. Basic Cable Box Connections yThur .................
Direct Connection: Cable signal coming fi'om yore" Cable TV input into your home may be a single (75 ohm) •able or use a cable box decoder. In either case the connection is very simple. Follow the steps below to connect television. Cable Cable Company (Round 75f_ your cable signal to your new coaxial cable) Direct Cable Connections: This connection will supply Stereo sound to the TV. Jack Panel Back of TV Connect end input of the onround Cable plied cablethe toopen the 75f_ the TV.
_o e TV s audio/video input jacks are Jbr direct picture and und connections between the TV and a VCR (or similar device) that has audio/video output .jacks. Both the AV1 and AV2 Input Jack connections are shown on this page, but either one can be connected alone.
T_e S(uper)-Video connection on the rear of the TV can provide ou with better picture detail and clarity for the playback of accessory sources than the normal antenna picture connections. NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page. Connect jack one on endtheofback the S-VIDEO CABLE to theone S- end VIDEO of the TV.
2 7" Real Flat_ TV with built-in D VD Highlights • Plays DVD, audio CD, CD-R, CD-RW and MP3 • Active Control TM optimizes picture • 27" Real Flat TMhigh contrast invar tube • QuadraSurf ri TV-DVD remote controller • 5-disc resume play Features • Side stereo AV inputs and headphone • Rear stereo AV inputs/outputs, • Digital AutoFeaturePak • AutoPicture TM • AutoSound TM • AutoMute TM • AutoLock TM above with S-Video and CVI comb filter for fine picture detail • 20 watt audio with Incredible Sho
27" Designer Technical Picture • Active Series Television specifications Sound Quality Quality Control TM Noise and sharpness improvement settings are optimized • 20 watt Stereo Sound system Receives stereo broadcasts for high power with every channel and source selection. • 27" Real Flat Tu high contrast invar tube dual speakers with exciting and lifelike • Incredible Surround TMsound The flattest tube provides a wider viewing reflections for the best picture possible.
