Owner’s Manual Manual del Propietario Manuel du Propriétaire 39ME413V 32ME403V 29ME403V 24ME403V 50ME313V 46ME313V 39ME313V 32ME303V Necesita ayuda inmediata? www.magnavox.com/support www.magnavox.com/support www.magnavox.
Contents 1 Notice 2 Important Positioning the TV Regulatory notices Environmental care 3 Get started Features Supplied accessories Symbols used in this Owner’s Manual Stand assembly Attaching the base Mounting the unit on your furniture Managing cables Installing the remote control batteries Remote control Control panel Terminals Connecting the antenna or the cable Connecting a set-top box, Blu-ray disc / DVD recorder via composite connectors and Analog Audio Plugging in the AC power cord Selecting your
Return your Product Registration Card or visit at www.magnavox.com/support today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once or visit at www.magnavox.com/support to ensure: Visit our World Wide Web Site at www.magnavox.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
1 Notice Modifications MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America. This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the Owner’s Manual.
2 Important CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Positioning the TV WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • • • • • • • • • • • • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
3 Get started Supplied accessories Owner’s Manual Quick Start guide Registration card Features • DTV / Analog TV / CATV You can use your remote control to select channels which are broadcast in Digital format and conventional Analog format. Also, cable subscribers can access their cable TV channels. • Remote Control and batteries (AAA, 1.5V x 2) Information display You can display the title, contents (DTV only) and other information of the current program on the TV screen.
(39ME313V / 32ME303V / 32ME403V / 29ME403V / 24ME403V) Stand assembly (50ME313V / 46ME313V / 39ME413V only) 1 2 1 4 [50ME313V / 46ME313V] × 3 [39ME413V: M4 x 0.393”(10mm)] × 2 Attaching the base You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps. (50ME313V / 46ME313V / 39ME413V) 1 × 3 Note 2 4 [50ME313V / 46ME313V] × 4 [39ME413V: M4 x 0.
Managing cables Route your antenna cable and all other cables through the cable management tie at the back of the TV. (50ME313V / 46ME313V / 39ME413V / 32ME403V / 29ME403V / 24ME403V) The holder helps keep your cables tidy and easily manageable. 1 Installing the remote control batteries Attach the cable management tie as illustrated below. 1 2 3 Slide the battery cover off the back of the remote control. Insert the 2 supplied batteries (AAA, 1.5V).
50” - 39” e j a k b l o *2 d f g p *2 m n h i 32” - 24” j a b *1c (POWER) Turns the TV On from Standby or Off to Standby. b PIC/SOUND MODE Optimizes Picture and Sound quality. c*1 FREEZE Freezes Screen image for 5 minutes. d 0 − 9 (NUMBER buttons) Used to enter a Channel / Program number. • (DOT) Use with 0-9 to select digital channels. For example, to enter 2.1, press a Remote control k l PREV.CH Returns to the previously viewed Channel. CH + / − Selects a Channel.
Control panel 50ME313V / 46ME313V * Keys on Rear. Control Keys are located on the Rear side of the TV. hgf a b c d e * When seen from the front. 39ME313V / 39ME413V / 32ME303V / 32ME403V / 29ME403V / 24ME403V a VOL ◄/► Adjusts the Volume. In the Menu screen, moves the Cursor Left (◄) / Right (►). VOL ◄ : Volume Down VOL ► : Volume Up b CH ▲/▼ Selects a Channel. In the Menu screen, moves the Cursor Up (▲) / Down (▼). c MENU Opens the Main On-screen Menu. d SOURCE Selects Connected devices.
Connecting the antenna or the cable Be sure your antenna or other device is connected properly before plugging in the AC power cord. If you connect to an antenna through RF cable Connecting a set-top box, Blu-ray disc / DVD recorder via composite connectors and Analog Audio Do not place your recorder too close to the screen because some recorders can be susceptible to signals. Any DTV programs that are broadcasted in your area can be received for free through an antenna connection.
No supplied cables are used with these connections: Connecting your devices • Please purchase the necessary cables at your local store. Before you connect AC power cord: Be sure other devices are connected properly before plugging in the AC power cord. HDMI Digital connection HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition Digital video and multi-channel Digital Audio through a single cable.
Component Analog Video Connection Digital Audio Output Connection Component Analog Video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks, connect Analog Audio cables to the Analog Audio (L/R) Input jacks. If you connect this unit to an external Digital Audio device, you can enjoy multi-channel audio like 5.1ch Digital broadcasting sound.
The following video signals can be displayed: PC connection HDMI connection This unit can be connected to your PC that has a HDMI terminal. Use an HDMI cable for this Digital connection. Format Resolution VGA 640 x 480 SVGA 800 x 600 XGA 1,024 x 768 WXGA FHD* HDMI cable 1,360 x 768 1,920 x 1,080 Note PC • • – – • Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core. The following operations may reduce noise.
These operations are accessible by remote control. Some may also be accessible by control panel on the main unit. 4 Use ▲▼ to select the desired location setting, then press OK. Home is the ENERGY STAR® qualified setting. Initial setup Initial setup Retail This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels.
4 Use your TV Switching channels 50ME313V / 46ME313V 39ME313V / 39ME413V / 32ME303V / 32ME403V / 29ME403V / 24ME403V Switching on your TV and putting it in Standby mode 39ME313V / 39ME413V / 32ME303V / 32ME403V / 29ME403V / 24ME403V 50ME313V / 46ME313V * Keys on Rear 50” - 39” 32” - 24” * Key on Rear To Turn the TV On from Standby or Off to Standby • Press (3 raised dots on the Rear panel) or Front panel or the Remote control. Note • Energy consumption contributes to air and water pollution.
Watching channels from an external device Switching Each Input Mode can easily switch with the remote control between TV (DTV or Analog TV) and external devices when they are connected to the unit. 1 Sleep timer Sleep Timer can set the unit to go into Standby mode after an incremental period of time. 32” - 24” 50” - 39” Turn On a set-top box or the connected device. • The picture from your set-top box or the connected device might appear automatically on the TV screen.
For 16:9 video signal fun-Link options (50ME313V / 46ME313V / 39ME313V / 39ME413V only) If you have our brand products such as Blu-ray disc player or DVD recorder that are compatible with fun-Link functions, connect them to this unit via an HDMI cable so you can simply operate various items from this unit’s remote control. Before you begin: You must set On in Device control and fun-Link control. ➟ p.29 Otherwise, LINK does not work even if you connected our brand devices to this unit.
TV screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the Digital mode, the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed. 1 Press INFO. Digital TV operation a b A Day of Memories Rating information: US TV: TV-MA US TV: TV-14 US TV: TV-PC US TV: TV-G c KABC 11.
5 Use more of your TV 2 This section describes the overview of the Main Menu displayed when you press MENU. The Main Menu consists of the function setting items below. Picture ➟ p.22 Adjusting the Picture Mode or customize the Picture quality as your preference. Displaying the Main Menu 1 Use ▲▼ to select the desired Menu and an item, then press OK or use ▲▼◄► to determine the setting. Press MENU to display the Main Menu. Sound ➟ p.
• You can set a particular Picture Quality using Advanced settings. Picture Picture Sound Setup Features Language USB Before you begin: You must Set Home in Location. ➟ p.30 Otherwise, personalized Picture and Sound settings will not be Memorized after the unit goes into Standby mode. 1 Press MENU and use ▲▼ to select Picture then press OK.
You can set the output mode as a default for the sound mode (Analog TV only). This setting is not interlocked when you change the output mode by pressing SAP. Refer to Switching audio mode. ➟ p.18 Sound Before you begin: You must set Home in Location. ➟ p.30 Otherwise, personalized Picture and Sound settings will not be memorized after the unit goes into Standby mode. 1 Press MENU and use ▲▼ to select Sound, then press OK.
• When the scanning and memorizing channels are completed, the lowest memorized channel will be displayed. This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the autoprogram due to reception conditions during the initial setting. Autoprogram Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete.
Analog/Cable TV operation Features 1 The primary caption and text services. captioning or text is displayed in the CC-1 and The same language as the program’s dialog T-1 (up to 4 lines of script on the TV Press MENU and use ▲▼ to select Features, then press OK. screen). Picture Sound Setup Features Language USB 2 Caption settings Child lock PC settings fun-Link (HDMI CEC) Location E-sticker Software upgrade Caption service Home -- Adjust the following items. as the preferred data channels.
See the following description for setting each item. Note • Digital caption service that you can switch differs depending on the broadcast description. • Caption style will not effect if the User setting is set to Off. • Closed Captioning service may not be controlled by this unit’s menu options if you are watching television through an external cable or satellite set-top box. In which case you will need to use the menu options on the external set-top box to control Closed Captioning.
Setting US movie and TV ratings US movie ratings lock is the rating system created by MPAA. US TV ratings lock has controlled access to individual programs based on their age ratings and content rating. 3 4 Use ▲▼ to select US movie ratings lock or US TV ratings lock, then press OK. Use ▲▼ to select the desired rating, then press OK repeatedly to switch between view and block. • For US TV ratings, you can further set the sub ratings to block specific elements of programming.
Canadian English or Canadian French ratings PC settings You can select the rating for Canadian English or Canadian French broadcasting. This function lets you adjust the PC screen position, clock and phase during PC Input. Use ◄► to adjust Clock setting to stabilize the PC screen and Phase setting to improve the clarity of the PC screen. 3 4 Use ▲▼ to select Canadian English rating or Canadian French rating, then press OK.
fun-Link (HDMI CEC) Device list This function allows you to operate the linked functions between our brand devices with a fun-Link feature and this unit connecting through an HDMI cable. You must connect this unit to our brand fun-Link devices and be sure its fun-Link (HDMI CEC) setting is also set to On. This function lets you see the product model number or name of connected devices. Use ▲▼ to select the desired fun-Link devices listed on the TV screen, then press OK.
Setting your location to home Language You can set the Location of your TV to Home or Retail. Choosing Home gives you full flexibility to change predefined settings for picture and sound. 1 1 Use ▲▼ to select Location, then press OK. Picture Sound Setup Features Language USB Caption settings Child lock PC settings fun-Link (HDMI CEC) Location E-sticker Software upgrade Picture Sound Setup Features Language USB Home -- 2 2 Use ▲▼ to select Home or Retail, then press OK.
Picture (JPEG) USB Your TV is fitted with a USB connection that enables you to view photos or watch Motion JPEG files stored on a USB Memory Stick. 1 1 Use ▲▼ to select the desired file, then press OK. Your USB Connect the USB Memory Stick to the USB terminal on the side of your TV. 2 Picture Picture Picture Press MENU and use ▲▼ to select USB, then press OK. • The highlighted text will move to the name of your USB Memory Stick, then press OK again.
6 Upgrade your TV software MAGNAVOX continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available. New software can be downloaded from our website at www.magnavox.com/support/download_list.php using the model number of your TV to find information. Checking your current software version 1 2 Press MENU and use ▲▼ to select Features, then press OK. Use ▲▼ to select Software upgrade, then press OK.
7 Useful tips FAQ Question Answer My remote control does not work. What should I do? • • • • • • • • Check the antenna or cable connection to the main unit. Check the batteries of the remote control. Check if there is an obstacle between the infrared sensor window and the remote control. Test the signal Output use IR Signal Check. ➟ p.35 If okay, then possible infrared sensor trouble. Aim the remote control directly at the infrared sensor window on the front of the unit.
Troubleshooting If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following Troubleshooting tips and all connections once before calling for service. Power No power • Make sure the AC power cord is plugged in. • Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally.
8 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards. Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
9 Specifications Model # 50ME313V 46ME313V 39ME313V / 39ME413V 32ME303V / 32ME403V 29ME403V 24ME403V Picture Type FHD (1920 x 1080 pixels 60Hz) WXGA (1366 x 768 pixels 60Hz) Aspect ratio Viewing angles 16:9 176° (V) by 176° (H) 178° (V) by 178° (H) 176° (V) by 176° (H) 178° (V) by 178° (H) Built-in Digital / Analog tuner ATSC (Digital) / NTSC (Analog) Mono / Stereo Mono, Stereo, SRS TruSurround XT® 176° (V) by 176° (H) Sound Power Output (RMS watts) 10 W x 2 8Wx2 Equalizer 5W x
10 Warranty LIMITED WARRANTY ONE (1) YEAR PARTS AND LABOR WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer.
FUNAI CORPORATION, Inc.
