Operation Manual

27
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMATION
English
PC Connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this Video connection
and it requires stereo mini plug conversion cable for Analog
Audio signal as well.
If you connect this unit to your PC, you can use this unit as a
PC monitor.
DVI OUT
audio audio
cablescables
mini audio cablemini audio cable
HDMI-DVI conversion cableHDMI-DVI conversion cable
HDMI-DVI HDMI-DVI
conversionconversioncable cable
should be should be
with ferrite core.with ferrite core.
personal computerpersonal computer
To HDMI 1 Input
jack only
The following video signals can be displayed:
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA
1,280 x 768
1,360 x 768
FHD 1,920 x 1,080
Other formats or non-standard signals will not be displayed
correctly.
Note
• Please purchase the HDMI-DVI conversion cable that has a ferrite
core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your
PC.
Cable Management
Keep the cables through this holder to avoid tangling them.
USB Storage Device
This unit offers easy playback of JPEG picture fi les.
Insert the USB storage device into the USB terminal shown
below. [USB]
➠
p. 24
Note
• The unit recognizes only a USB storage device.
• Do not use a USB hub or an extension cable to connect an
external hard disk drive to the unit. (Not supported.)
• A USB storage device is always inserted to this unit directly.
• A USB storage device is not supplied with this unit.
• We do not guarantee that all USB storage devices can be
supported by this unit.
• Be sure to keep a backup copy of the original fi les on your device
before you play them back on this unit. We have no responsibilities
for damage or loss of your stored data.
• To protect your USB storage device fi les from being erased place
the write protect sliding tab in the protect position.
• When you are ready to remove a USB storage device, at fi rst turn
the unit off so it will go into standby mode to avoid any damage
to your data and the unit.
• A USB storage device that requires its own driver or the device
with a special system such as fi ngerprint recognition are not
supported.
• This unit is not allowed to use the USB storage device which
requires an external power supply (500mA or more).
• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
• Only USB 2.0 is supported.
• Up to 10,000 fi les or 1,000 folders with 19 hierarchies can be
recognized.
• Up to 255 English characters can be recognized.
• This unit does not support MTP(Media Transfer Protocol).
• This unit supports FAT16 and FAT32 fi le systems.
• If the fi le is not supported, an error message appears.
• When the USB storage device is not recognized, try reconnecting
it again.
It is recommended that files to be played back in this unit are
recorded under the following specifications:
• Upper limit : 24 Megapixel