Owner’s manual Manuel du propriétaire Manual del propietario 40MF430B LCD TV English Français 1-866-341-3738 1-866-341-3738 Español 1-866-341-3738 Guía d Us Uso so R Rááp MODEL NUMBER A01PBUH_40MF430BF7_EN_v1_wo_Energy_Star.
Return your Product Registration Card or register online at www.magnavox.com/support today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible g for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.
English IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
English Features Contents 3 4 INTRODUCTION 5 6 6 6 6 7 7 8 8 PREPARATION 9 9 10 14 14 15 WATCHING TV 16 16 16 16 17 17 18 18 18 Main Menu Autoprogram Channel List Add Channels Antenna Confirmation Language Selection Picture Adjustment Sound Adjustment Closed Caption Child Lock Fun-Link Energy Saving Mode Location Current Software Info 19 19 20 20 21 21 22 22 24 27 29 30 30 30 TROUBLESHOOTING FAQ Troubleshooting Guide 31 32 INFORMATION Glossary Maintenance General Specifications Electrical Specific
Supplied Accessories Owner’s manual (1EMN26742) Quick Start (1EMN26359) Attaching the Base You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. 1 Remote control (NF804UD) Registration card (1EMN24699 ) AC power cord (WAV0162LW001) or (WAV0162LTE03) or (WAV152ZHN001) Batteries (AAA, 1.5V x 2) AAA Screw kit for attaching the base (1ESA23096) A AA 2 3 Spread a thick and soft cloth over a table as shown.
English 1 VOLUME + / - 1 3 ➠ ➠ p.19 p.16 ➠ p.15 Press to adjust the volume or move right (+) / left (–) through the main menu items. 2 MENU 3 CHANNEL + / - Press to select channels or move up (+) / down (–) through the main menu items. 4 POWER 5 Infrared sensor window Receives infrared rays transmitted from the remote control. 6 POWER indicator WATCHING TV 4 5 6 7 p.17 PREPARATION 2 ➠ INTRODUCTION Control Panel Lights up green when power is on.
Remote Control Function 1 (power) 2 SAP 3 SOURCE 1 2 3 10 11 12 4 5 13 6 ▲/▼/◄/►(cursor) 7 BACK Press to return to the previous menu operation. ➠ p.17 9 PREV CH ➠ p.16 Press to return to previously viewed channel. ➠ p.16 ➠ p.17 10 SLEEP 14 15 16 8 ➠ p.15 ➠ p.15 ➠ p.18 5 OK 8 VOL + / − 6 7 4 FREEZE Press to freeze screen image. ➠ p.15 ➠ p.17 ➠ p.16 ➠ p.16 17 18 19 9 20 11 FORMAT Press to select aspect p ratio available for the TV screen. 12 RED / GREEN / BLUE / YELLOW ➠ p.
English No supplied cables are used with these connections: Before you connect: Be sure your antenna or other device is connected properly before plugging in the AC power cord. Use an HDMI or component video cables to connect the HDMI or the Component Video Input jacks of the unit to the HDMI or the component video output jacks of the cable receiver / satellite box.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. HDMI-DVI Connection Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack. e.g.
English S-Video Connection Component Video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component Video Input jacks, connect audio cables to the Audio L/R Input jacks right beside the Component Video connector. S-Video connection offers good picture quality for video devices connected to the unit. If you connect to the unit’s S-Video Input jack, connect audio cables to the Audio L/R Input jacks right beside the Composite Video connector. e.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. Composite Video Connection Composite Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Composite Video Input jack, connect audio cables to the Audio L/R Input jacks right beside the Composite Video connector. When the audio jack of the video device is monaural, connect an audio cable to the Audio L Input jack. e.g.
English This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cables as well. If you connect this unit to your PC, you can use this unit as a PC monitor. PREPARATION e.g.) INTRODUCTION PC Connection OPTIONAL SETTING stereo mini plug conversion cables DVI OUT personal computer HDMI-DVI conversion cable should be with ferrite core.
Cable Management Use the following accessary with this connection: Keep the cables through this holder to avoid tangling them. • AC power cord x 1 Plug In the AC Power Cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed. rear of this unit rear of this unit AC power cord AC outlet Caution: • Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
English 4 Use ◄/► to select the desired location setting, then press OK. Initial Setup Select “Retail” or “Home” for your location. Initial Setup Select Make sure the unit is connected to antenna or cable. After making all the necessary connections, press to turn on the unit. Use ▲/▼ to select [Antenna] for TV channels or [Cable] for CATV channels, then press OK. Note • If you are not receiving a signal from your cable service, contact the Cable provider.
WATCHING TV Sleepp Timer can be set to automatically turn off the unit after an incremental period of time. Press SLEEP repeatedly to change the amount of time (increases the time by 30 minutes up to 120 minutes) until shut off. Sleep 120min. Press SLEEP P once to call up the display for checking the remaining time. • To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is displayed.
English INTRODUCTION TV Screen Display p y Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal Normal displays a 16:9 picture at its original size.
TV Screen Information Reducing the Brightness You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Backlight brightness can be reduced which may save on power consumption more than you just set [On] in [Energy Saving Mode]. ➠ p.30 Press INFO. Press ECO once to reduce the brightness.
English Main Menu Picture Press MENU. Sound Setup Language Before you begin: Make sure the unit is connected to antenna or cable. 1 2 3 4 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Autoprogram], then press OK. Use ▲/▼ to select an appropriate option, then press OK. Picture Picture Sound Setup Features Select your signal source. Language Antenna Cable Or Cable ANT.IN • When connected to VHF / UHF antenna, select [Antenna].
Channel List Add Channels The channels selected here can be skipped when selecting the channels using CH + / – . Those channels can still be selected with the Number buttons. This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting. 1 2 3 4 1 2 3 4 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Channel List], then press OK.
English Language Selection ATSC This function lets you check the digital signal strength of each channel. 1 2 3 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Antenna], then press OK. Press MENU to display the main menu. Use ▲/▼ to select [Language], then press OK. Use ▲/▼ to select [English], [Español] or [Français], then press OK. Use the Number buttons or CH + / – to select the channel for which you want to check the digital signal strength.
Picture Adjustment Sharpness You can adjust picture mode, or customize the picture quality as your preference. Before you begin: 0 Adjust Move OK OK Color Temperature Color Temp. Normal You must set [Home] in [Location]. ➠ p.30 Otherwise, the settings you adjusted will not be memorized after you turn off the unit. 1 2 3 Sharpness Adjust 5 Move OK OK Press ◄ to soften Press ► to sharpen ◄ to add warm colors Press ► to add cool colors Press MENU to exit.
English Adjust the following items. Smart Sound Use ▲/▼ to select the desired setting, then press OK. ([Personal], [Standard], [Movie], [Music], and [News]) Smart Sound Sound Equalizer Standard Setup Virtual Surround Sound Movie Features Auto Volume Leveling Music Language TV Speakers News Reduces volume differences between the TV commercials and the programs. Off Removes the auto volume leveling. TV Speakers Select the audio output from the unit’s speakers, or not.
Closed Caption A. Caption Service You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed on-screen. 1 2 3 4 5 Use ▲/▼ to select [Caption Service], then press OK. Use ▲/▼ to select the desired closed caption, then press OK. Press MENU to display the main menu. Use ▲/▼ to select [Features], then press OK. Use ▲/▼ to select [Closed Caption], then press OK.
English C. Caption Style ATSC ATSC You can change the caption style such as font, color or size, etc. 4 4 Use ▲/▼ to select [Caption Style], then press OK. 5 Use ▲/▼ to select [User Setting], then press OK. 5 Use ▲/▼ to select the desired digital caption service, then press OK.
Font Style Background Opacity Closed Caption Closed Captioning font style can be changed as illustrated. Closed Caption Background opacity of the displayed caption can be switched as illustrated. Solid Flash Translucent Transparent Font Size Font size of the displayed caption can be switched as illustrated. Edge Color Closed Caption Edge color of the displayed caption can be switched as illustrated.
English A. Channel Lock Child lock reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible. Press MENU to display the main menu. 5 6 Use ▲/▼ to select [Features], then press OK. Use ▲/▼ to select [Channel Lock] k , then press OK.
C. Setting TV ratings 5 6 D. Change PIN Use ▲/▼ to select [US TV Ratings Lock] k , then press OK. Use ▲/▼ / ◄/► to select the desired rating, then press OK K repeatedly to switch between [View] and [Block] k. Picture FV Sound TV-MA Setup TV-14 Features TV-PG Language TV-G V S L Although the default PIN code (0000) is supplied with the unit, you can set your own PIN code. 5 6 D Use ▲/▼ to select [Change PIN], then press OK. Press the Number buttons to enter the new 4-digit PIN code.
English Auto TV On This unit will turn on detected when the power on signal is sent from your connected Fun-Link device. Use ▲/▼ to select the desired setting, then press OK. This function allows you to operate the linked functions between our brand devices with a Fun-Link feature and this unit connecting through an HDMI cable. Press MENU to display the main menu. Picture On Use ▲/▼ to select [Features], then press OK. Sound Off Use ▲/▼ to select [Fun-Link], then press OK.
Energy Saving Mode Current Software Info You can set whether the power consumption is saved or not. This function shows what version of the software currently used. 1 2 3 4 Press MENU to display the main menu. Use ▲/▼ to select [Features], then press OK. Use ▲/▼ to select [Energy Saving Mode], then press OK. Use ▲/▼ to select the desired mode, then press OK. 1 2 3 4 Picture On Sound Off Setup Features Press MENU to display the main menu. Use ▲/▼ to select [Features], then press OK.
English INTRODUCTION TROUBLESHOOTING FAQ Answer • • • • • • • How come the Initial setup appears every time I turn on this unit? Why I cannot watch some RF signal TV programs. • • Connect the RF coaxial cable to the unit directly and run the initial setup. Make sure to complete the channel scan before turning off the unit. • • Make sure [Autoprogram] has been completed. ➠ p.
Troubleshooting Guide If the unit does not perform properly when operated as instructed in this manual, check the followingg chart and all connections once before callingg for service. Symptom No power Control button does not work. Power is ON but no screen image. Remedy • • • • • • • • • • • • • No picture or sound • • • • • • Make sure the AC power cord is plugged in.
English INTRODUCTION Remedy • • This unit will memorize the volume level from the last time you adjusted it. If the volume of the sound from another device is higher or lower, then the loudness will change. • This unit will memorize the viewing mode from the last time you used the particular input modes. The display image does not cover • the entire screen. If you are watching TV or using the Composite Video, S-Video, Component Video or T repeatedly to switch various screen modes.
INFORMATION Glossary Maintenance ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
English Terminals Antenna Input VHF / UHF / CATV Audio Input RCA jack (L/R) x 8 Composite Video Input RCA jack x 2 S-Video Input Mini DIN 4pin jack x 2 Component Video Input RCA jack x 3 HDMI Input 75 Ω unbalanced (F-type) 500mV rms 1 V p-p (75 Ω) Y 1V p-p (75 Ω) C 286 mV p-p (75 Ω) Y 1V p-p (75 Ω) Pb/Cb 700 mV p-p (75Ω) Pr/Crr 700 mV p-p (75Ω) HDMI 19 pin x 3 500 mV p-p (75 Ω) 500 mV rms Remote control Digital encoded infrared light system Audio Output 10W, 8 Ω x 2 120V~ AC +/– 10 %, 60 Hz +/– 0.
EN A01PBUH_40MF430BF7_EN_v1_wo_Energy_Star.
English INTRODUCTION LIMITED WARRANTY NINETY (90) DAY LABOR / ONE (1) YEAR PARTS Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.
