User Manual Manuel de l’utilisateur Guía del usuario 42MF439B LCD TV English Français 1-866-341-3738 HIGH DEFINIT ON TELEVISION MODEL NUMBER SERIAL NUMBER 1-866-341-3738 Español 1-866-341-3738
Return your Product Registration Card or register online at www.magnavox.com/support today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
INTRODUCTION 5 Precaution Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual.
Supplied Accessories user manual (1EMN24661) quick start guide (1EMN24665) remote control (NF802UD) Phillips pan screw for attaching the stand x 4 (FPH34140) cable management tie (1EM428657) AC power cord (WAV0162LW001) or (WAV0162LTE03) WATCHING TV batteries (AAA x 2) registration card (1EMN24699) PREPARATION • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • Manufactured under license from Dolby Laboratories.
INTRODUCTION 5 Features • DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. • Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen. • Autoprogram - This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.
5 Terminals 8. S-video / video / audio input jack for VIDEO 2 (p. 11) S-video, RCA video, RCA audio cable connection from an external device. 9. USB terminal (p. 13) Use this terminal only to play back MP3 / JPEG files stored in the USB flash memory, or when software update is needed. 10. HDMI 2 input jack (p. 9 / p. 10) HDMI connection from HDMI device.
INTRODUCTION 5 Remote Control Function 6. 7. 1 2 11 3 4 12 8. 9. 10. 5 6 7 13 14 8 15 11. 12. 9 16 13. 10 14. 1. 2. 3. 4. 5. y (power) (p. 14) Press to turn the unit on and off. SOURCE (p. 16) Press to access connected external devices like a BD/DVD recorder. FREEZE (p. 16) Press to pause screen image. s / B / K / L (p. 14) Press to move left / right / up / down through the items. OK (p. 14) Press to decide the command of setting when the main menu is displayed. 15. 16. BACK (p.
INTRODUCTION PREPARATION No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. PREPARATION Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. 5 Antenna Connection Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
PREPARATION No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. 5 External Device Connection [HDMI Connection] HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. e.g.
INTRODUCTION No supplied cables are used in this connection: Please purchase the necessary cables at your local store. PREPARATION [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s COMPONENT video input jack, connect RCA audio cables to the audio L/R jacks below the component video connector. RCA component video cable e.g.
PREPARATION No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Audio Output Connection] À Digital (for digital broadcasting only) If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.
INTRODUCTION Supplied accessories used in this connection are as follows: • cable management tie x 1 • AC power cord x 1 This unit offers easy playback JPEG pictures and MP3 musics. Insert the USB flash memory to the USB terminal shown as below. For more details, refer to “JPEG/MP3 Playback” on page 33. Attach the supplied cable management tie first into the holes on the lower side of the rear of this unit shown as below. Keep the cables through this holder to avoid tangle them.
PREPARATION These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 Initial Setup This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels. 4 Use [Cursor s/ B] to select the desired location setting, then press [OK]. Initial Setup S Before you begin: Select “Retail” or “Home” for your location.
5 Channel Selection 5 Volume Adjustment Select channels by using [CH + / -] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. PREPARATION • To select the memorized channels, use [CH + / -] or [the Number buttons]. • To select the non-memorized channels, use [the Number buttons]. Use [VOL + / -] to adjust the audio volume.
WATCHING TV 5 Still Mode 5 Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [FREEZE] to pause the image shown on the TV screen. FREEZE Press [SAP] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. 11 • The sound output will not be paused.
INTRODUCTION 5 TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV PREPARATION TV In the analog mode, the current channel number and the audio mode are displayed. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Press [INFO] to display the details of the currently selected program. Press [INFO].
WATCHING TV 5 TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [FORMAT] repeatedly to switch the TV aspect ratio. For 16:9 video signal For 4:3 video signal Normal 16:9 Wide Movie Expand Normal Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen.
5 Main Menu 5 Autoprogram This section describes the overview of the main menu displayed when you press [MENU]. For more details, see the reference page for each item. The main menu consists of the function setting items below. If you switch wires (e.g., between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform autoprogram. 1 Press [MENU] to display the main menu. Press [MENU].
OPTIONAL SETTING 5 Channel List 5 Add Channels The channels selected here can be skipped when selecting the channels using [CH + / -]. Those channels can still be selected with [the Number buttons]. This function lets you add the channels that were not added by the autoprogram due to the receptible condition at the initial setting. 1 Press [MENU] to display the main menu. 1 Press [MENU] to display the main menu. 2 Use [Cursor K/L] to select “SETUP”, then press [OK].
INTRODUCTION 5 Antenna Confirmation 5 Language Selection You can choose English, Spanish, or French as your on-screen language. DTV This function lets you check the digital signal strength of each channel. PREPARATION 1 Press [MENU] to display the main menu. 1 Press [MENU] to display the main menu. 2 Use [Cursor K/L] to select “SETUP”, then press [OK]. WATCHING TV 2 Use [Cursor K/L] to select “LANGUAGE”, then press [OK].
OPTIONAL SETTING 5 Picture Adjustment You can adjust brightness, contrast, color, tint, sharpness and color temperature. Before you begin: You must set ”Home” in ”Location” (Refer to page 32). Otherwise, the settings you adjusted will not be memorized after you turn off the unit. Brightness, Contrast, Color, Tint, Sharpness, Color Temperature 1 Press [MENU] to display the main menu. Use [Cursor K / L] to select the desired setting, then use [Cursor s / B] to adjust.
You can adjust the smart sound, equalizer and some other sound functions. INTRODUCTION 5 Sound Adjustment Use [Cursor K / L] to select the desired option, then press [OK]. Before you begin: You must set ”Home” in ”Location” (Refer to page 32). PICTURE On SOUND Off PREPARATION Otherwise, the settings you adjusted will not be memorized after you turn off the unit. SETUP FEATURES LANGUAGE This selects he modes for more spatial or surround sound reproduc ion.
OPTIONAL SETTING 5 Closed Caption A. Caption Service You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed onscreen. 4 Use [Cursor K/L] to select “Caption Service”, then press [OK]. 1 Press [MENU] to display the main menu. PICTURE Caption Service Off SOUND Digital Caption Service Off SETUP Caption Style FEATURES LANGUAGE USB 2 3 Use [Cursor K / L] to select “FEATURES”, then press [OK].
INTRODUCTION B. Digital Caption Service C. Caption Style DTV DTV You can change the caption style such as font, color or size, etc. 4 Use [Cursor K/L] to select “Digital Caption Service”, 4 Use [Cursor K/L] to select “Caption Style”, then press then press [OK]. [OK].
OPTIONAL SETTING Font Style Edge Color Closed Captioning font style can be changed as below. Edge color of the displayed caption can be switched as below.
INTRODUCTION 5 Child Lock See the following description for setting each item. 1 Press [MENU] to display the main menu. PICTURE Use [Cursor K / L] to select “FEATURES”, then press [OK]. SOUND Channel Lock US Movie ratings lock SETUP US TV ratings lock FEATURES Canadian English Rating LANGUAGE Canadian French Rating USB Region ratings lock Change PIN A... “A.
OPTIONAL SETTING A. Channel Lock B. US Movie ratings lock Particular channels or external input modes can be invisible in this function. US Movie ratings lock is the rating system created by MPAA (Motion Picture Association of America). 5 Use [Cursor K/L] to select “Channel Lock”, then press 5 Use [Cursor K/L] to select “US Movie ratings lock”, [OK]. then press [OK].
INTRODUCTION C. US TV ratings lock press [OK]. Channel Lock SOUND US Movie ra ings lock SETUP US TV ratings lock FEATURES Canadian English Rating LANGUAGE Canadian French Rating USB Region ratings lock Mature audience only TV-14 Unsuitable for children under 14 TV-PG Parental guidance suggested TV-G General audience TV-Y7 Appropriate for all children 7 and older TV-Y Appropriate for all children Change PIN then press [OK] repeatedly to switch between “View” and “Block”.
OPTIONAL SETTING D. Change PIN Although the default code “0000” is supplied with the TV, you can set your own PIN Code. 5 Use [Cursor K/L] to select “Change Pin”, then press [OK]. PICTURE Cannel Lock SOUND US Movie ra ings lock SETUP US TV ratings lock FEATURES Canadian English Rating LANGUAGE Canadian French Rating USB Region ratings lock Change PIN 6 Press [the Number buttons] to enter the new 4-digit PIN Code. • Enter PIN Code again in “Confirm Pin” entry field.
INTRODUCTION 5 PC Settings This function lets you adjust the PC screen position during PC input through the HDMI 1 input jack. PREPARATION 1 Press [MENU] to display the main menu. 5 Adjust the setting. Position Reset Use [Cursor K / L] to select “Reset”, then press [OK]. [OK]. Cancel PICTURE SOUND Resets the display position of the picture.
OPTIONAL SETTING 5 Energy Saving Mode 5 Location You can set whether the power consumption is saved or not. When you select ”Retail”, the power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification. 1 Press [MENU] to display the main menu. 1 Press [MENU] to display the main menu. 2 Use [Cursor K/L] to select “FEATURES”, then press 2 Use [Cursor K/L] to select “FEATURES”, then press [OK]. [OK].
INTRODUCTION 5 JPEG/MP3 Playback This function shows what version of the software currently used. This unit can play JPEG and MP3 files. Use the USB flash memory contains those files. 1 Press [MENU] to display the main menu. 1 Insert the USB flash memory to the USB terminal of this unit. PICTURE Your USB SOUND his menu allows ou to enjoy your photos and music via your USB device. SETUP FEATURES 2 Use [Cursor K/L] to select “FEATURES”, then press LANGUAGE USB WATCHING TV [OK].
OPTIONAL SETTING [Picture] [Music] Use [Cursor K / L] to select the desired file, and then press [OK] or [Cursor B ]. Use [Cursor K / L] to select the desired file, and then press [OK] or [Cursor B ]. Your USB Picture P cture Image1 jpg Image1.jpg Image2.jpg Image3.jpg Image4.jpg Image5.jpg Your USB Music Mus c Music1 mp3 Title: Artist: Album: Duration: Year: Music1.mp3 Music2.
INTRODUCTION TROUBLESHOOTING 5 FAQ • Connect the RF coaxial cable to the unit directly and run the initial setup. • Make sure to complete the channel scan before turning off the unit. Why I cannot watch some TV programs. • Make sure autoprogram has been completed. (Refer to “Autoprogram” on page 19.) • Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast. • The selected channel may not be broadcasting.
TROUBLESHOOTING 5 Troubleshooting Guide If the unit does not perform properly when operated as instructed in this manual, check the following chart and all connections once before calling for service. Symptom Remedy No power • Make sure the AC power cord is plugged in. • Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet. • If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
INTRODUCTION • This unit will memorize the volume level from the last time you adjusted it. • If the volume of the sound from another device is higher or lower, then the loudness will change. You switch to a different input and the screen size changes. • This unit will memorize the viewing mode from the last time you used the particular input modes. The display image does not cover the entire screen.
INFORMATION 5 Glossary ATSC Dolby Digital SAP (Secondary Audio Program) Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio. Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.
INTRODUCTION 5 Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.
LIMITED WARRANTY NINETY (90) DAY LABOR / ONE (1) YEAR PARTS WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer.
