Manual

Connecting Accessory Devices toYour TV
presented here is a connection example
invoh4ng a VCR and cable box.
R_ffbr to the VCR :_directionsJbr-use manual
fi_rjhrther #lfbrmation on connections.
lb make the connections in this example, you
will need."
• one, two-way signal splitter
• two coaxial cables (75£2)
• one cable.fbr a video connection lstandard
RCA connecto 0
• two cables/or audio connections (standard
RCA connectors) (only one cable is needed
jbr connection to a nonstereo VCR).
NOTE: 771e cables are not supplied with your
TE You should be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
1-800-53!-0039.
1
2
cffga-
Connect a cable TV signal to a two-
way signal splitter,
Connect one of the two-way signal
splitter outputs to the INPUT on the
cable box,
Connect the other two-way signalsplitter output to the ANTENNA IN
75_ on the rear of the TVI
Connect from the cable box OUTPUTjack to the ANT IN jack on the rear of
the VCR.
Connect the VIDEO OUT jack on
the VCR to the INF'UT-AV 1 VIDEO
jack on the rear of the TV,
Connect the AUDIO OUT R(ight)
and L(eft) jacks on the VCR to
INPUT-AV 1 AUDIO jacks on the rear
of the TV.
NOTE: if the VCR is a nonstereo unit,
connect only the left audio cable,
which usually has a white connector.
Press the AV button on the remotecontrol as many times as necessary
to select the AVI source,
Turn the VCR on and push PLAY to
view a videotape,
Rear of VCR*
• Example: Philips
_CR model
VR674CA_
[]
@
PHILIPS 1,
Rear of Cable Box
To simplify" malting connections, the connectors
on audio and video cables are often color coded.
The jacks on your TV are likewise color coded
Io match the connectors. The coding is as fol-
lows:
• Yellow for video (composite)
• Red for the right audio channel
• White for the left audio channel
NOTE: If your VCR is mono (nonstereo),
you will connect only one audio cable, You
must ensure that the TV is set io MONO for
the signal source to which you've connected
the VCR (INPUT-AV l, INPUT-AV 2, or the
side panel inputs [AV3]). Otherwise, you will
receive ,soundfrom only one of the TV's
speakers, See page 36.