IMPORTANT 1 HITACHI PROJECTION COLOR TV 60SX8B/9K 50SX6P 50UX18B/19K 46UX16B/17K OPERATING GUIDE TABLE OF CONTENTS IMPORTANT...................................................................................................................... 3 SAFETY TIPS..................................................................................................................... 4 PICTURE CAUTIONS .......................................................................................................
IMPORTANT STROBE FREEZE ................................................................................................ 28 USING THE REMOTE TO CONTROL VCR FUNCTIONS.......................................... 29 PRECODED VCR BUTTONS .............................................................................. 29 SELECT BUTTON.................................................................................................. 29 EXCLUSIVE TV BUTTONS..............................................................
IMPORTANT IMPORTANT Follow all warnings and instructions marked on this television receiver. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY TIPS SAFETY TIPS IMPORTANT SAFEGUARDS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI TELEVISION RECEIVER CAUTION: * Read all of these instructions. * Save these instructions for later use. * Follow all warnings and instructions marked on the television receiver. Our reputation has been built on the quality, performance, and ease of service of HITACHI television receivers. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS result in a fire or electric shock. Never spill liquid of any kind on the television set. 7 If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet and refer servicing to qualified service personnel. 8 If liquid has been spilled into this television set, unplug it from the wall outlet and refer service to qualified service personnel. 9 Do not subject your television set to impact of any kind.
SAFETY TIPS 15 The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, and to protect from overheating. These openings must not be blocked or covered. • Never cover the slots or openings with cloth or other material. • Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. • Never place the set near or over a radiator or heat register.
SAFETY TIPS OPERATION OF YOUR SET 19 This television set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.
SAFETY TIPS 27 Upon completion of any service or repairs to the television set, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.
PICTURE CAUTIONS PICTURE CAUTIONS WARNING Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers. Such "PATTERN BURNS" constitute misuse and are NOT COVERED by your Hitachi Factory Warranty.
ACCESSORIES ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. 1. Genius Remote Control Unit CLU-850GR (part No.2573971) 2. Four "AA" size (SUM-3), 1.5 V batteries (For Remote Control Unit) REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. Open the battery cover of the remote transmitter by pushing the notched part of the cover with your fingers. 2. Insert four new "AA" size batteries equivalent for the Genius Remote.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV HOW TO SET UP YOUR NEW HITACHI PROJECTION TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for the best performance. However, if you are located in an exceptionally good signal area that is free from interference, and multiple image ghosts, an indoor antenna may be sufficient.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV CAUTION: The magnetic field of external speakers may cause the TV picture to distort if the speakers are placed too close to the television. Move the speakers away from the TV until there is no picture distortion.
HOOK-UP CABLES AND CONNECTORS
HOOK-UP CABLES AND CONNECTORS
FRONT PANEL CONTROLS FRONT PANEL CONTROLS Click to see front panel diagram. AVX (Audio/Video) selector Press this button to select the current antenna source, VIDEO: 1, 2, or 3. Your selection is shown in the top right corner of the screen. VOLUME level Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. CHANNEL selector Press these buttons until the desired channel appears in the top right corner of the TV screen.
FRONT PANEL JACKS AND CONNECTIONS FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: Click to see Front Panel Connection examples NOTE: Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
REAR PANEL JACKS REAR PANEL JACKS Click to see Rear Panel Jacks. Antenna Input / Output The "ANT" button on the Genius Remote Control allows you to switch between two separate 75-Ohm RF antenna inputs, Main (VHF/UHF) and Auxiliary (AUX). The antenna output labeled "To converter" allows the Main (VHF/UHF) antenna connection to pass directly to a different source such as a pay-TV cable decoder.
REAR PANEL CONNECTIONS REAR PANEL CONNECTIONS Click to see Rear Panel Connections. Typical full-feature set-up. Follow connections that pertain to your personal entertainment system.
REAR SPEAKER TERMINAL CONNECTIONS REAR SPEAKER TERMINAL CONNECTIONS Connect after turning the power to the TV OFF. Press the Right Speaker red button and insert the positive (+) lead wire into the hole below the button. When the button is released, the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
REAR SPEAKER TERMINAL CONNECTIONS TIPS ON REAR PANEL CONNECTIONS The S-Video connection is provided for high performance laser discs, VCRs, etc., that have this feature. Use this connection in place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), connect it to the left audio jack on the TV. Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
AUDIO SYSTEM SET-UP AUDIO SYSTEM SET-UP Match the numbers below to the diagram for speaker placement and refer to the table for the surround sound requirements. (See page 47 for SURROUND functions.) The television's internal speakers. These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" output on the TV. These speakers are connected to the Rear Speaker 8 Ohm output on the TV.
THE REMOTE CONTROL (CLU-850GR) THE REMOTE CONTROL (CLU-850GR) In addition to controlling all the functions on your HITACHI Color TV, the new Genius Remote is designed to operate different types of VCR's and different types of CATV (Cable TV) converters with one touch. Basic operation keys are grouped together in one area. All other controls are separated from them and arranged in MULTI-PAGE sections, with a display that can be switched to cover any of the four pages.
MULTI-PAGE WINDOWS MULTI-PAGE WINDOWS Click to see the Multi-Page Windows of the Remote.
HOW TO USE THE REMOTE TO CONTROL YOUR TV HOW TO USE THE REMOTE TO CONTROL YOUR TV POWER button Press this button to turn the TV set on or off. If an automatic message is set, it will be displayed when the TV is first turned on. (See page 41.) RECALL button When you want to check the channel being received, or if it has a stereo (ST) or second audio program (SAP), press the RECALL button. You can check the time, and if the ON TIME or OFF TIME has been set. (See page 40.
HOW TO USE THE REMOTE TO CONTROL YOUR TV These buttons are also used for FAVORITE CHANNELS. (See page 35) The "ENTER" button will set features to your preference. "CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc.. CHANNEL SELECTOR buttons Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. Use the "100" button for channels 100 and higher. Channel selection may also be performed by pressing channel up ( down ( ).
HOW TO USE THE REMOTE TO CONTROL YOUR TV LAST CHANNEL (LST-CH) button Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.) PICTURE-IN-PICTURE buttons See separate section on page 21 for a description.
PICTURE-IN-PICTURE (PIP) PICTURE-IN-PICTURE (PIP) The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program while viewing a VCR program (TV or tape) on any of the video inputs. PIP BUTTON Press the "P IN P" button and a sub-picture appears in one corner of the screen. Press the button a second time to remove the sub-picture from the screen.
PICTURE-IN-PICTURE (PIP) convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the button again. STROBE FREEZE Press this button without a sub-picture to freeze one or four frames of the picture you are currently viewing. Press this button again or PIP to return to normal viewing.
USING THE REMOTE TO CONTROL VCR FUNCTIONS USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the pre-coded function for your VCR This Genius Remote is designed to operate different types of VCRs. You must first program the Genius Remote to match the remote system in your VCR. (Refer to Table 1 on page 25). 1. Set the MULTI-PAGE select switch to "VCR". 2. Set the USE/LEARN mode select switch on the rear side of the Genius Remote to "USE." 3. Turn ON your VCR. 4.
USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the pre-coded function for your Cable Box This Genius Remote is designed to operate different types of cable boxes. You must first program the Genius Remote to match the remote system in your cable box. (Refer to Table 2 on page 25). 1. Set the MULTI-PAGE select switch to "CATV". 2. Set the USE/LEARN mode select switch to "USE." 3. Turn ON your cable box. 4.
VCR AND CABLE BOX CODES VCR AND CABLE BOX CODES TABLE 1.
VCR AND CABLE BOX CODES TABLE 2.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS The Genius Remote is equipped with a learning function which allows it to learn additional infrared control codes. This remote will not only control the television, a VCR, and a cable box, but also other electronic equipment which uses an infrared remote transmitter, by learning the transmitter's codes. Only infrared remote control codes can be stored in memory.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS Set the MULTI-PAGE select switch to "USER" position. Press one of the learnable buttons on the Genius Remote, ("7" in this example). This button will be used to store the new code. The READY indicator will flash at this time. (The light will remain lit for approximately 15 seconds. If no other function is performed at this time, the operation is canceled.) The Genius Remote is ready to receive an infrared code from another remote.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS 3. Be sure to keep the original remote transmitter even after storing its codes in the Genius Remote Control. 4. If the Genius Remote is left with its batteries removed, the learned codes in its memory are erased and will have to be reprogrammed into the memory. 5. The Genius Remote Control may not be able to learn certain special remote codes. CAUTION ON BATTERIES: 1.
EASY GRAPHIC GUIDE EASY GRAPHIC GUIDE Press MENU on the remote control to display the different features on your HITACHI TV. The feature to be selected will be highlighted in a magenta (purple) color. Press the CURSOR buttons to highlight a different feature. Press ENTER on the remote control to select a feature. NOTE: Press the CURSOR buttons first to view FAVORITE CHANNELS (See Page 35.) AIR/CABLE Select antenna or cable TV. AUTO PROGRAM First time setup for channel buttons.
EASY GRAPHIC GUIDE PROGRAM LIST Check channel name, scan, child-lock. VOLUME CORRECTION Lower volume on selected channels. CLOCK SET Set before using timer features. ON/OFF TIMER Turn TV on or off one time or daily. AUTOMATIC MESSAGE 1 Set for one time or daily. AUTOMATIC MESSAGE 2 Set for one time or daily. PREFERENCE ADJUST Adjust color, brightness, etc.. PREFERENCE SETTING Improve picture performance. CONVERGENCE ADJUST Match red, green, and blue colors to make white.
SET UP SET UP Select SET UP when setting your TV up for the first time. Use the CURSOR UP/DOWN buttons on the remote to highlight the function desired. AIR/CABLE Select AIR if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit. Your choice will be shown on the display. Reception channels for each mode are shown at the left.
SET UP If the MENU button is pressed while the auto programming function is engaged, programming will stop. If two antennas are connected, switch antenna inputs with the ANT button and repeat auto programming for the second antenna input. Remember to select the correct AIR/CABLE mode before using auto programming for the second antenna input. See CHANNEL MEMORY to add or erase additional channels.
SET UP Use the CURSOR or to highlight the function to change, press ENTER to change the function, and press MENU to exit. C.C. Selected Text Selected NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have sound, make sure MUTE is not set.
FAVORITE CHANNELS FAVORITE CHANNELS The FAVORITE CHANNELS function will allow you to select up to 16 favorite channels by pressing the cursor buttons. or number buttons to select one of your favorite Use the CHANNEL , channels. Use the CURSOR buttons to select the location (in magenta color) for your favorite channel. Press ENTER to save the channel location. Enter channel 00 to erase a favorite channel. Highlight ACTION and press ENTER to use your favorite channels.
RESET RESET Use the reset to change your preferred video and audio adjustments to factory settings. NOTE: This RESET Selection will not change your preferred adjustments. To change back to your adjustments, see VIDEO (Page 42) or AUDIO (Page 45).
PROGRAM PROGRAM This selection contains advanced features which will make TV viewing easier and more enjoyable. CHANNEL CAPTION Use this feature to give channel names to up to 30 channels for each antenna source.
PROGRAM The code to set or cancel CHILD LOCK is a three digit key number. The factor preset key number is 000. The picture and sound will now be blocked out for this channel. Repeat the same steps to cancel the CHILD LOCK. To change the key number, select key number change. Enter the old number (factory preset 000 for first time use), then enter a new three digit key number you prefer. If you forget your key number, use the factory code 777 to erase your key number.
CLOCK CLOCK Use this feature for all time related function. CLOCK SET The time must be set before you can use the on/off timer or automatic message. Use the NUMBER buttons and CURSOR , to set the time. The AM or PM selected will be highlighted in blue. ON/OFF TIMER This function will automatically turn the TV on or off, one time only or everyday. The selection to change will be in magenta. Press the number buttons to select the time the TV will turn on or off.
CLOCK to select a letter or other character. Use the CURSOR , Use the CURSOR , to change position. Press ENTER when message is finished. The asterisk (*) represents a blank space. Move the CURSOR , until (CANCEL) is magenta and press ENTER to erase message. Use CURSOR , Use CURSOR in blue. , to choose MODE or TIME. to set MODE when it is magenta. Your choice will be Use the NUMBER buttons to set the time. Press ENTER to start and MENU to exit.
VIDEO VIDEO Select VIDEO to adjust picture settings, improve picture quality and to adjust convergence. PREFERENCE ADJUST Use this feature to adjust contrast, color, etc. Press the CURSOR buttons to select and make adjustments. The function to be adjusted will be in magenta. CONTRAST- Use this function to change the contrast between black and white level in the picture. This adjustment will only affect the picture when the PICTURE SETTING AI is OFF.
VIDEO Use the CURSOR Use the CURSOR red. , , to select function. to turn function on or off. Your choice will be in AI (ARTIFICIAL INTELLIGENCE) When the AI function is on, the TV's internal computer will perform the following: 1. Automatically monitor and adjust contrast depending on room lighting (sensor is located in the front panel), to produce a more natural picture. 2. Automatically monitor and adjust color levels and maintain natural flesh tones. 3.
VIDEO Press the CURSOR , Press the CURSOR , to move the color displayed up or down. to move the color displayed left or right. Press ENTER to change the color. Press MENU to exit. NOTE: If the 60SX8B/9K or 50SX6P is unplugged from the wall outlet or there is a power loss, CONVERGENCE may appear to be misadjusted. Wait 30 seconds after the set is plugged in or power returns before turning the set on.
AUDIO
AUDIO
AUDIO
AUDIO
CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water. Dry with a soft cloth. (A mild soap may be used if the screen is extremely dirty.) Place your TV and remote control away from extreme heat, humidity and extremely dusty places.
RECEPTION PROBLEMS RECEPTION PROBLEMS IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
CHECK HERE BEFORE CALLING FOR SERVICE CHECK HERE BEFORE CALLING FOR SERVICE Click here to see Troubleshooting Chart. This Projection Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage or power surges. IF YOUR SET SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1) Push the power switch (ON/OFF switch) once.
SPECIFICATIONS SPECIFICATIONS Features: Superfine Picture Quality 1000 Line Horizontal Resolution (60SX8B, 60SX9K, 50SX6P) 950 Line Horizontal Resolution (other models) Pure Green and Red Filter Lenses Artificial Intelligence System Dolby Pro Logic*/Hall/Matrix 4-Way Surround Sound Genius Remote (Controls many VCR brands, cable boxes, and other audio/video equipment) Easy Graphic Guide On-Screen Display Favorite Channel Preview Full set of Input Jacks, Including S-Video Closed Caption Decoder High Resolut
SPECIFICATIONS Average input level.....470mVrms Maximum input level.....940mVrms Outputs: Video.....1.0Vp-p, 75 Ohm Audio (fixed).....470mVrms, 1k Ohm Dimensions: 60SX8B/9K Height (in.) 60 1/2 Width (in.) 52 3/8 Depth (in.) 27 7/8 Weight (lbs.) 391 46UX16B/17K 50UX18B/19K 50SX6P 49 1/2 51 7/8 51 7/8 41 1/8 44 1/8 41 5/8 27 27 1/2 27 1/2 221 250 250 NOTE: Due to improvements, specifications in this operating guide are subject to change without notice.
NOTES NOTES (blank page) 59
HITACHI SERVICE HOTLINE To locate an authorized HITACHI service facility in the continental U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day 800 HITACHI 1-800-448-2244 Hitachi Home Electronics (America), Inc. Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
WARRANTY CARD, front WARRANTY CARD, front HITACHI PROJECTION TV LIMITED WARRANTY Hitachi Home Electronics (America), Inc. Hitachi Sales Corporation of Hawaii Hitachi Home Electronics (America), Inc.
WARRANTY CARD, front 3219 Koapaka St.
WARRANTY CARD, back WARRANTY CARD, back Warranty Limitations The Limited Warranty provided by Hitachi does not cover: A. Antennas, cabinet, cabinet parts, knobs, batteries and accessories. B. Screens that have been cleaned with anything other than water and a mild soap solution. C. Lenses from units that have been sold or transferred from the original purchaser. Any lens element that is permanently attached to the CRT assembly is excluded from the lifetime warranty.
WARRANTY CARD, back HITACHI Projection TV Limited Warranty Registration (For your record - Attach sales receipt to this card) Model no. Serial no. Dealer Name Date of Purchase Dealer Address City State Zip 1 Introduced in 94-95 line. Mention as current model!!! Warranty: 1 yr Labor, 1 yr Parts, Lifetime Lenses, 90 days screen, 2 yrs CRT's.
