Manual

<
mr remote control is set to
work your TV and many
il!frared remote (IR ) control
Cable Converters. However, an
easy one-time step may be neees-
sa_ before the remote will work
your Converter.
Try this initial check to see if
going on to the following section
is necessary.
._ Press the CBL but-System
ton on the remote.
<_ Point remote toward Cable
<:
Converter and press the POWER
button.
9, Does the remote turn the
Converter ON?
IF YES, O and try the CH • •
and CH number buttons on the
remote. If they also work the
Converter then the remote is
ready and no further steps are
needed.
If NO, continue...
m i
Cable
Converter
/ I
<_ First look TWO-DIGITup
a
remote code number for your
brand Converter before going
through the simple "1,2,3" steps
(on the following page).
continue to next page
Remember, if more than
one number is listed, you
may have to try more than the first
two-digit code given in order to
locate your Converter's remote
code.
CONVERTER REMOTE
BRAND CODE NO.
Archer ................. 28
Diamond ............... 23
Drake .................. 37
Gemini ................. 45
Hamlin .............. 14, 15
Hitachi ................. 25
Jerrold .00,01,02,03,04,05,46,55
Macom ............. 29, 38
Magnavox ........... 17, 31
NSC ................... 49
Oak ............. 06, 27, 39
Panasonic ........... 18, 35
Philips ..... 19, 20, 21,24, 26
Pioneer ............. 09, 32
Regency ............. I0, II
CONVERTER REMOTE
BRAND CODE NO.
Rembrant ............... 33
Salora .................. 52
Scientific Atlanta ...08, 22, 47
Sheritech ............... 34
Starcom ................. 30
Sylvania ................. 16
Texscan ................ 48
Tocom ............ 12,13, 53
Toshiba ................ 43
Uniden Satellite .......... 44
Unika .................. 50
United Satellite .......... 54
Universal ............... 36
Video Tech .............. 40
Video Way .............. 5 l
Zenith ............ 07, 41,42
32