Manual

y adding optional external
speakers to the TV's sound
system, yo_t can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
_) b6th external
Connect
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
_,_ Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
_,_ Turn TV ON place
and the
STEREO control to the "STEREO
IF AVAILABLE" (u,") position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front TV
speakers. It is intended for the rear speakers to give
a background noise effect which requires a lower
volume level than the TV's front speakers.
Remember,
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Slereo Surround
control is turned
ON - see Variable
Audio section
_;low).
REAP, SPEAKER REAR SPEAKER
PRIMARY VIEW:[NG AREA
he TV's Variable Audio Output
acks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speakers can be used for
the playback of Surround Sound.
_[_ Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
¢.._,,,,_ Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(t,,") position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
BACK OF TV
VARIABLE AUDIO
_ OUTPUT JACKS
ALDIO
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND SOUND SPEAKERS
27