Manual

T_ormore convenient Direct
€
t playback connections the TVs
Front Audio/Video Input panel can
be used. Located next to the TV's
front control panel (under a small
cover door) these Input jacks allow
for quick and easy connections,
p6_rticularly Jbr the playback of
Camcorder tape recordings.
To view the playback of a
Camcorder recording using the
Audio/Video Input jacks on the
front of the TV:
<_ Connect the VIDEO OUT jack
from the Camcorder to the Front
VIDEO IN jack on the TV.
_ Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
Camcorder to the Front AUDIO IN
jacks on the TV.
<_ Select the "AUX 3"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDhighlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
<_ Press the MENU &Y and
MENU (M) buttons to highlight
and select (u,") the AUX 3 mode.
_Turn the Camcorder ON and
press PLAY to view the tape on
the TV.
_ FF_TURE MENU
1
PICTURE AND S DUND FROM PLAYBACK
@ @@
\
FRONT AUDIO/VIDEO JACKS
Lift Up on Jackpanel Cover Plate
to expose Input Jacks.
VIDEO IN
(YEI_LOW)
AUDIO/VIDEO
OU'[ PUT JACKS
ON CAMCORDER
CAMCORDER
]f you have a single (monaural) ]
Auc io Output Camcorde_, "Y" /
connectors are available to complete /
you: connection. Contact your
dealer, or our Parts Information ]
Center (1-800-292-6066) to order [
_myoptional accessories. ]
Remember, after it is
connected an easy way to
select the ALrX 3 mode is to press
rite VCR button on the front of the
TV (or the TViVCR button on the
remote). Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 3 to the
TV's channel memory (see page
14), just press the CHANNEL
_L_' buttons to select the
VCR/AUX mode.
29