Manual

'_our Tgrel_JIotecanbesetto
work your VCR or Cable
Converter by what is called the
SEARCH method.
If the "REMOTE CODE" number
method shown in the previous
section did not set your remote to
work your VCR or Converter, then
follow the easy steps listed below.
Please read through steps 1-4
before beginning.
<_ Press the on
POWER button
I he VCR or Converter to turn theunit ON.
<_ Stand at least six feet away
f_om the front of the VCR or
Converter.
Point the remote toward the unit.
HOLD DOWN the SURF and
tlhe desired System (VCR or
CBL-Converter) buttons at the
same time. KEEP HOLDING
13Uqq'ONS DOWN.
<_ Watch the Channel Indicator
I n the unit.
Channel Numbers will SCAN UP
when the unit has been identified.
This may take up to two minutes.
_ Release the SURF and System
(VCR or CBL) buttons as soon
as channel numbers start to scan
up. The code has been identified
zaadthe remote is ready to operate
with the VCR or Converter.
m
!
code and another two minute II
.,;earcc_ll have to be II
repeated. I
]_n 0 channel change happens |
within two minutes, repeat steps 1- |
4. Should a channel ch .an..gestill |
not .occur, _ _m.ote.wil! not |
work with the desired unit. |
CABLE CONVERTER
0g
T
Six Feet
(minimum)
t I
42