Manual

,)icture-in-Picture (PIP) is the
showing of lwo pictures on the
TV screen at the same time. (One
main screen picture and one small
inset picture - o,r PIP). For your
ea'.¢e and convenience this TV has
two separate inputs (ANTenna A
and ANTenna B_)for your home's
Antenna and/or Cable TV system
signal.
The ANT A input is primarily for
the TV's main screen picture. The
ANT B input is provided as a
second, dedicated source option
for the TV' s PIP "window" and its
feature operations. The signal
connected to the ANT B input can
be either a Spli/ Signal Input (as
described in the section on this
page), or another type of external
signal source (such as a satellite
dish system, additional home
antenna, video accessory, etc.).
See the followipg steps on how
channels connected to the
ANT(enna) B h_put can be shown
a_d used within the PIP window."
<_ your Antenna or
Connect
Cable TV signal to the single 75
ohm INPUT plug on a two-way
Signal Splitter (not supplied).
Connect two lengths of RF
Coaxial Cable (F-type connectors
on both ends) to the two OUTPUT
plugs on the two-way Signal
Splitter.
<_ Connect the twin OUTPUT
plugs on the Signal Splitter to the
ANT A and ANT B Inputs on the
rear of the TV.
continue to next page
For other possible PIP
connections see page 49 for
the "More PIP Connections"
,;ection.
IT you need any accessories or
parts to complete the described
PIP connections, contact your
dealer, or our Parts Information
Center at (I-800-292-6066), for
details.
- blAIN SCREEN -
Display signal supplied
primarily through
ANT A Input on rear
of TV.
Combination VnF/UHF Antenna
300 to 75_ Adapter
_ (483521827003)
Round Cable
75_ Ohm
- Outdoor or Indoor Antenna-
receives normal broadcast channels
2-13 (VHF) and 14-69 (UI-IF)
J OPTIONAL TWO-
WAY SIGNAL
(single 75ohm Input to twin 75 ohm Outputs -
optional RF Coaxial connecting cables also
required)
Cable TV Signal
Round Cable
75xq Ohm
Cable TV
Company
See the Set-Up Guide also provided with
your TV set for further Cable TV connection
options and accessories.
44
- PIP WINDOW- ]
Display signal :;upplied]
primarily through ANT /
B Input on rear of"l%'. J
ANT(enna) B
Input
Note:: The purpose of the ANT B input is to
provide z.n easily connected, dedicated picture
source for PIP feature use. Other signal source
options (such as a satellite dish system, additional
external mtenna, VCR, or Vie.co Game) could also
be connected and displayed on the TV's PIP screen
window :hrougb the use of the ANT B input.