Manual

uto-Programming (see
, adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels,from the list of
channels in the TV's memory.
Select CHANNEL MEMORY
(ADD/DELETE CHANNELS)
control.
With the FEATURES MENU on
screen, move the REDhighlight
with the MENU (M) t=_buttons.
Then press the MENU button.
<_ Press the CHANNEL AV or
number buttons to select the
channel you want to add or delete.
<_ Press the MENU I_ button to
ADD the channel into the TV's
memory.
Press the MENU • button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
_ Press the STATUS or MENU
button to clear the screen when
through,
the AUX 1, AUX 2, or
AUX 3 modes just like a channel.
Then by pressing the CHANNEL
&Y buttons the AUX(iliary)
mode can quickly be selected to
use the desired set of Input jacks
on the TV (see page 28).
Note: AUX 1, AUX 2, and AUX 3
modes are located between the
lowest and highest channel
numbers within the
ADD/DELETE CHANNEL
control screen.
f
-- MAtH MENU
_ FEATURE MENU
1CF5_
-- CHANNEL MEMORY --
l_ SELECT CHANNEL
to DELETE CHANNEL
for ANT B
(_ when RNISHED
w
NOTE: A separate ADD/DELETE CHANNEL memory
may also be created for the ANT(enna) B Input on ehe
rear of the set (if an Antenna or Cable "IV signal h_ been
connectad). Just press the _ button on the remote,
while in the ADD/DELETE CHANNEL rondo, to switch
hetween the ANT A and ANT B ¢harm¢[ memory lists¸
Then follow steps 2 and 3 as shown to the [eft to add or
delete the desired channels.