Manual

speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at u movie theater or concert
hall.
(-.,_ Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<_ Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead vie_ drawing.)
_TurD TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (t,,,') position.
After setup whenever a stereo
signal is reeeivcd the audio will be
heard in Surround Sound.
Tjahe TV's Variable Audio Output
cks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speakers can be used for
the playback of Surround Sound.
<_ Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
<_ Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(t,,") position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
REAR SURROUND SOUND
SPEAKER TERMINALS
SACK OF TV
Remember, a
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
controI is turned
ON - see Variable
Audio section
below).
TV
REAR SURROUND SOUND SPEAKERS
Note: Tlae rear Surround Sound speakers will not
be heard at the same volume level as the front TV
speakers. I1is intended for ihe rear speakers Io give
a background noise effect which requi_s a lower
volum_ level Ehar_the TV_s front speakers.
REAR REAR SPEAKER
VIEWING AREA
PRIMARY
BACKOFTV
VARIABLE AUDIO
sr_a_ OUTPUT JACKS
AUDIO
INPUT JACKS
AUDIO SYSTEM SPEAKERS USeD AS REAR
SURROUND SOUND SPEAKERS
27