Manual

Tjahe TWs Audio/Video Input
cks are for direct picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has Audio/Video Output
jacks.
To view the playback of a VCR
tape by using the Audio/Video
Input jacks on the TV:
_..,_ Connect the VIDEO OUT
jack
I from the VCR to the AUX 1
VIDEO IN jack on the TV.
_,_ Connect the AUDIO OUT
I acks R(ight) and L(eft) from the
VCR to the AUX I AUDIO IN
jacks on the TV.
<_ Select the "AUX I"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDhighlight
with the MENU (M) _buttons.
Then press the MENU button.
'_ Press the AY and
MENu
MENU (M) buttons to highlight
and select (t,,,') the AUX I mode.
I_Turn the VCR ON and press
PLAY to view the tape on the
I O
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
I
@
NOTE: Connections and use of the
TV's AUX 2 Audio!Video Input jacks
are the same as for the AUX [ jacks
Cexcept "AUX 2" is selected as the
Picture Source in step 3),
BAC K OF TU
VCR
If you have a single (monaural)
Audio Output VCR, "Y" connectors
are available to complete your
connection. Contact your dealer, or
our Parts Information Center ( 1-800-
292-6066) to order any ol_ional
aCCL'_ $orie$,
Remember, after it is
ticonnected an easy way to
select the AUX I mode is to press
the VCR button on the front of the
"IV(or the TV/VCR button on the
remote.) Channels 3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected in this
way.
If you have added AUX 1 to the
TV's channel memory (see page
14), just press the CHANNEL
AV buttons to select the AUX I
mode.
28